linux-stable.git/drivers/platform, branch v5.4.32

platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()

2020-04-13T08:48:09+00:00

commit 767191db8220db29f78c031f4d27375173c336d5 upstream.

The Power Management Events (PMEs) the INT0002 driver listens for get
signalled by the Power Management Controller (PMC) using the same IRQ
as used for the ACPI SCI.

Since commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering, without there being a wakeup
cause recognized by the ACPI sleep code, will no longer wakeup the system.

This breaks PMEs / wakeups signalled to the INT0002 driver, the system
never leaves the s2idle_loop() now.

Use acpi_register_wakeup_handler() to register a function which checks
the GPE0a_STS register for a PME and trigger a wakeup when a PME has
been signalled.

Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+  # 5.4+
Signed-off-by: Hans de Goede 
Acked-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

platform/x86: pmc_atom: Add Lex 2I385SW to critclk_systems DMI table

2020-04-02T13:11:01+00:00

commit 95b31e35239e5e1689e3d965d692a313c71bd8ab upstream.

The Lex 2I385SW board has two Intel I211 ethernet controllers. Without
this patch, only the first port is usable. The second port fails to
start with the following message:

    igb: probe of 0000:02:00.0 failed with error -2

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Tested-by: Georg Müller 
Signed-off-by: Georg Müller 
Reviewed-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

platform/x86: intel_mid_powerbtn: Take a copy of ddata

2020-02-14T21:34:12+00:00

commit 5e0c94d3aeeecc68c573033f08d9678fecf253bd upstream.

The driver gets driver_data from memory that is marked as const (which
is probably put to read-only memory) and it then modifies it. This
likely causes some sort of fault to happen.

Fix this by taking a copy of the structure.

Fixes: c94a8ff14de3 ("platform/x86: intel_mid_powerbtn: make mid_pb_ddata const")
Signed-off-by: Mika Westerberg 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

platform/x86: intel_scu_ipc: Fix interrupt support

2020-02-11T12:35:15+00:00

commit e48b72a568bbd641c91dad354138d3c17d03ee6f upstream.

Currently the driver has disabled interrupt support for Tangier but
actually interrupt works just fine if the command is not written twice
in a row. Also we need to ack the interrupt in the handler.

Signed-off-by: Mika Westerberg 
Reviewed-by: Andy Shevchenko 
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

platform/x86: intel_pmc_core: update Comet Lake platform driver

2020-02-05T21:22:45+00:00

[ Upstream commit 515ff674bb9bf06186052e352c4587dab8defaf0 ]

Adding new CML CPU model ID into platform driver support list.

Signed-off-by: Harry Pan 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Sasha Levin

platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits

2020-02-05T21:22:45+00:00

[ Upstream commit 1f27dbd8265dbb379926c8f6a4453fe7fe26d7a3 ]

Allow the user to configure the fan to turn on / speed-up at lower
thresholds then before (20 degrees Celcius as minimum instead of 40) and
likewise also allow the user to delay the fan speeding-up till the
temperature hits 90 degrees Celcius (was 70).

Cc: Jason Anderson 
Reported-by: Jason Anderson 
Signed-off-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Sasha Levin

platform/x86: dell-laptop: disable kbd backlight on Inspiron 10xx

2020-02-01T09:34:47+00:00

[ Upstream commit 10b65e2915b2fcc606d173e98a972850101fb4c4 ]

This patch adds a quirk disabling keyboard backlight support for the
Dell Inspiron 1012 and 1018.

Those models wrongly report supporting keyboard backlight control
features (through SMBIOS tokens) even though they're not equipped with
a backlit keyboard. This led to broken controls being exposed
through sysfs by this driver which froze the system when used.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107651
Signed-off-by: Pacien TRAN-GIRARD 
Reviewed-by: Mario Limonciello 
Reviewed-by: Pali Rohár 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Sasha Levin

platform/chrome: wilco_ec: fix use after free issue

2020-01-26T09:01:08+00:00

[ Upstream commit 856a0a6e2d09d31fd8f00cc1fc6645196a509d56 ]

This is caused by dereferencing 'dev_data' after put_device() in
the telem_device_remove() function.
This patch just moves the put_device() down a bit to avoid this
issue.

Fixes: 1210d1e6bad1 ("platform/chrome: wilco_ec: Add telemetry char device interface")
Signed-off-by: Wen Yang 
Cc: Benson Leung 
Cc: Enric Balletbo i Serra 
Cc: Nick Crews 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra 
Signed-off-by: Sasha Levin

MIPS: Loongson: Fix return value of loongson_hwmon_init

2020-01-17T18:48:55+00:00

commit dece3c2a320b0a6d891da6ff774ab763969b6860 upstream.

When call function hwmon_device_register failed, use the actual
return value instead of always -ENOMEM.

Fixes: 64f09aa967e1 ("MIPS: Loongson-3: Add CPU Hwmon platform driver")
Signed-off-by: Tiezhu Yang 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Huacai Chen 
Cc: Jiaxun Yang 
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

platform/x86: GPD pocket fan: Use default values when wrong modparams are given

2020-01-17T18:48:43+00:00

commit 6ae01050e49f0080ae30575d9b45a6d4a3d7ee23 upstream.

Use our default values when wrong module-parameters are given, instead of
refusing to load. Refusing to load leaves the fan at the BIOS default
setting, which is "Off". The CPU's thermal throttling should protect the
system from damage, but not-loading is really not the best fallback in this
case.

This commit fixes this by re-setting module-parameter values to their
defaults if they are out of range, instead of failing the probe with
-EINVAL.

Cc: stable@vger.kernel.org
Cc: Jason Anderson 
Reported-by: Jason Anderson 
Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging")
Signed-off-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman