linux-stable.git/drivers/platform, branch v5.4.185

platform/x86: ISST: Fix possible circular locking dependency detected

2022-02-23T10:59:55+00:00

[ Upstream commit 17da2d5f93692086dd096a975225ffd5622d0bf8 ]

As reported:

[  256.104522] ======================================================
[  256.113783] WARNING: possible circular locking dependency detected
[  256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted
[  256.125362] ------------------------------------------------------
[  256.131673] intel-speed-sel/844 is trying to acquire lock:
[  256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common]
[  256.147171]
[  256.147171] but task is already holding lock:
[  256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170
[  256.160407]
[  256.160407] which lock already depends on the new lock.
[  256.160407]
[  256.168712]
[  256.168712] the existing dependency chain (in reverse order) is:
[  256.176327]
[  256.176327] -> #1 (misc_mtx){+.+.}-{3:3}:
[  256.181946]        lock_acquire+0x1e6/0x330
[  256.186265]        __mutex_lock+0x9b/0x9b0
[  256.190497]        mutex_lock_nested+0x1b/0x20
[  256.195075]        misc_register+0x32/0x1a0
[  256.199390]        isst_if_cdev_register+0x65/0x180 [isst_if_common]
[  256.205878]        isst_if_probe+0x144/0x16e [isst_if_mmio]
...
[  256.241976]
[  256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}:
[  256.248552]        validate_chain+0xbc6/0x1750
[  256.253131]        __lock_acquire+0x88c/0xc10
[  256.257618]        lock_acquire+0x1e6/0x330
[  256.261933]        __mutex_lock+0x9b/0x9b0
[  256.266165]        mutex_lock_nested+0x1b/0x20
[  256.270739]        isst_if_open+0x18/0x90 [isst_if_common]
[  256.276356]        misc_open+0x100/0x170
[  256.280409]        chrdev_open+0xa5/0x1e0
...

The call sequence suggested that misc_device /dev file can be opened
before misc device is yet to be registered, which is done only once.

Here punit_misc_dev_lock was used as common lock, to protect the
registration by multiple ISST HW drivers, one time setup, prevent
duplicate registry of misc device and prevent load/unload when device
is open.

We can split into locks:
- One which just prevent duplicate call to misc_register() and one
time setup. Also never call again if the misc_register() failed or
required one time setup is failed. This lock is not shared with
any misc device callbacks.

- The other lock protects registry, load and unload of HW drivers.

Sequence in isst_if_cdev_register()
- Register callbacks under punit_misc_dev_open_lock
- Call isst_misc_reg() which registers misc_device on the first
registry which is under punit_misc_dev_reg_lock, which is not
shared with callbacks.

Sequence in isst_if_cdev_unregister
Just opposite of isst_if_cdev_register

Reported-and-tested-by: Liwei Song 
Signed-off-by: Srinivas Pandruvada 
Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: apple-gmux: use resource_size() with res

2022-01-05T11:37:43+00:00

[ Upstream commit eb66fb03a727cde0ab9b1a3858de55c26f3007da ]

This should be (res->end - res->start + 1) here actually,
use resource_size() derectly.

Signed-off-by: Wang Qing 
Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep

2021-12-08T08:01:09+00:00

[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ]

When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
by command 'nmcli r wwan' or 'rfkill list'.

Issue analysis as below:
  When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
  In patch V2, Hans said 'sw_state should be unchanged
after a suspend/resume. It's better to drop the
tpacpi_rfk_update_swstate call all together from the
resume path'.
  And it's confimed by Lenovo that GWAN is no longer
 available from WHL generation because the design does not
 match with current pin control.

Signed-off-by: Slark Xiao 
Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'

2021-11-26T09:47:19+00:00

[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]

If 'led_classdev_register()' fails, some additional resources should be
released.

Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.

Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET 
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning

2021-11-17T08:48:38+00:00

[ Upstream commit fd96e35ea7b95f1e216277805be89d66e4ae962d ]

A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:

drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
        else if ((strlencmp(cmd, "level disengaged") == 0) |
                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                                           ||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.

This should clearly be a logical OR so change it to fix the warning.

Fixes: fe98a52ce754 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic 
Signed-off-by: Nathan Chancellor 
Reviewed-by: Nick Desaulniers 
Link: https://lore.kernel.org/r/20211018182537.2316800-1-nathan@kernel.org
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: wmi: do not fail if disabling fails

2021-11-17T08:48:27+00:00

[ Upstream commit 1975718c488a39128f1f515b23ae61a5a214cc3d ]

Previously, `__query_block()` would fail if the
second WCxx method call failed. However, the
WQxx method might have succeeded, and potentially
allocated memory for the result. Instead of
throwing away the result and potentially
leaking memory, ignore the result of
the second WCxx call.

Signed-off-by: Barnabás Pőcze 
Link: https://lore.kernel.org/r/20210904175450.156801-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: intel_scu_ipc: Update timeout value in comment

2021-10-27T07:54:29+00:00

[ Upstream commit a0c5814b9933f25ecb6de169483c5b88cf632bca ]

The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .

Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.

Signed-off-by: Prashant Malani 
Cc: Benson Leung 
Reviewed-by: Mika Westerberg 
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call

2021-10-20T09:40:17+00:00

commit 9b024201693e397441668cca0d2df7055fe572eb upstream.

Change kstrtou32() argument 'base' to be zero instead of 'len'.
It works by chance for setting one bit value, but it is not supposed to
work in case value passed to mlxreg_io_attr_store() is greater than 1.

It works for example, for:
echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable
But it will fail for:
echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable,
where n > 1.

The flow for input buffer conversion is as below:
_kstrtoull(const char *s, unsigned int base, unsigned long long *res)
calls:
rv = _parse_integer(s, base, &_res);

For the second case, where n > 1:
- _parse_integer() converts 's' to 'val'.
  For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3
  'len' is set to 3 (string buffer 0x33 0x0a), etcetera.
- 'base' is equal or greater then '2' (length of input buffer).

As a result, _parse_integer() exits with result zero (rv):
	rv = 0;
	while (1) {
		...
		if (val >= base)-> (2 >= 2)
			break;
		...
		rv++;
		...
	}

And _kstrtoull() in their turn will fail:
	if (rv == 0)
		return -EINVAL;

Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver")
Signed-off-by: Vadim Pasternak 
Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

2021-09-30T08:09:22+00:00

[ Upstream commit 349bff48ae0f5f8aa2075d0bdc2091a30bd634f6 ]

ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.

Instead of adding ifdeffery here and there, drop ACPI_PTR()
and unused acpi.h.

Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver")
Reported-by: kernel test robot 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210827145310.76239-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/chrome: cros_ec_proto: Send command again when timeout occurs

2021-09-22T10:26:38+00:00

commit 3abc16af57c9939724df92fcbda296b25cc95168 upstream.

Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.

Cc:  # 4.4+
Signed-off-by: Patryk Duda 
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung 
Signed-off-by: Greg Kroah-Hartman