linux-stable.git/drivers/platform, branch v4.19.92

platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes

2019-12-31T15:36:25+00:00

commit 133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream.

At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):

Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5

We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.

This commits bumps the buffer size, fixing the error.

Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size

2019-12-05T08:21:35+00:00

commit f3e4f3fc8ee9729c4b1b27a478c68b713df53c0c upstream.

The AML code implementing the WMI methods creates a variable length
field to hold the input data we pass like this:

        CreateDWordField (Arg1, 0x0C, DSZI)
        Local5 = DSZI /* \HWMC.DSZI */
        CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)

If we pass 0 as bios_args.datasize argument then (Local5 * 0x08)
is 0 which results in these errors:

[   71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133)
[   71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)
[   71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)

And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands
like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for
read commands where extra input is needed to specify exactly what to read.

So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected
output as insize to hp_wmi_perform_query(), as we are already doing for all
other HPWMI_READ commands we send. Doing so fixes these errors.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer

2019-12-05T08:21:35+00:00

commit 16245db1489cd9aa579506f64afeeeb13d825a93 upstream.

The HP WMI calls may take up to 128 bytes of data as input, and
the AML methods implementing the WMI calls, declare a couple of fields for
accessing input in different sizes, specifycally the HWMC method contains:

        CreateField (Arg1, 0x80, 0x0400, D128)

Even though we do not use any of the WMI command-types which need a buffer
of this size, the APCI interpreter still tries to create it as it is
declared in generoc code at the top of the HWMC method which runs before
the code looks at which command-type is requested.

This results in many of these errors on many different HP laptop models:

[   14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236)
[   14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
[   14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543)

This commit increases the size of the data element of the bios_args struct
to 128 bytes fixing these errors.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

platform/x86: mlx-platform: Fix LED configuration

2019-12-05T08:20:00+00:00

[ Upstream commit 440f343df1996302d9a3904647ff11b689bf27bc ]

Exchange LED configuration between msn201x and next generation systems
types.

Bug was introduced when LED driver activation was added to mlx-platform.
LED configuration for the three new system MQMB7, MSN37, MSN34 was
assigned to MSN21 and vice versa. This bug affects MSN21 only and
likely requires backport to v4.19.

Fixes: 1189456b1cce ("platform/x86: mlx-platform: Add LED platform driver activation")
Signed-off-by: Vadim Pasternak 
Signed-off-by: Darren Hart (VMware) 
Signed-off-by: Sasha Levin

ACPI / scan: Create platform device for INT33FE ACPI nodes

2019-12-01T08:16:35+00:00

[ Upstream commit 589edb56b424876cbbf61547b987a1f57d7ea99d ]

Bay and Cherry Trail devices with a Dollar Cove or Whiskey Cove PMIC
have an ACPI node with a HID of INT33FE which is a "virtual" battery
device implementing a standard ACPI battery interface which depends upon
a proprietary, undocument OpRegion called BMOP. Since we do have docs
for the actual fuel-gauges used on these boards we instead use native
fuel-gauge drivers talking directly to the fuel-gauge ICs on boards which
rely on this INT33FE device for their battery monitoring.

On boards with a Dollar Cove PMIC the INT33FE device's resources (_CRS)
describe a non-existing I2C client at address 0x6b with a bus-speed of
100KHz. This is a problem on some boards since there are actual devices
on that same bus which need a speed of 400KHz to function properly.

This commit adds the INT33FE HID to the list of devices with I2C resources
which should be enumerated as a platform-device rather then letting the
i2c-core instantiate an i2c-client matching the first I2C resource,
so that its bus-speed will not influence the max speed of the I2C bus.
This fixes e.g. the touchscreen not working on the Teclast X98 II Plus.

The INT33FE device on boards with a Whiskey Cove PMIC is somewhat special.
Its first I2C resource is for a secondary I2C address of the PMIC itself,
which is already described in an ACPI device with an INT34D3 HID.

But it has 3 more I2C resources describing 3 other chips for which we do
need to instantiate I2C clients and which need device-connections added
between them for things to work properly. This special case is handled by
the drivers/platform/x86/intel_cht_int33fe.c code.

Before this commit that code was binding to the i2c-client instantiated
for the secondary I2C address of the PMIC, since we now instantiate a
platform device for the INT33FE device instead, this commit also changes
the intel_cht_int33fe driver from an i2c driver to a platform driver.

This also brings the intel_cht_int33fe drv inline with how we instantiate
multiple i2c clients from a single ACPI device in other cases, as done
by the drivers/platform/x86/i2c-multi-instantiate.c code.

Reported-and-tested-by: Alexander Meiler 
Signed-off-by: Hans de Goede 
Acked-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items

2019-11-24T07:20:39+00:00

[ Upstream commit 8289c4b6f2e53750de78bd38cecb6bce4d7a988c ]

Clang warns that mlxplat_mlxcpld_msn201x_items is not going to be
emitted in the final assembly because it's only used in ARRAY_SIZE right
now, which is a compile time evaluation since the array's size is known.

drivers/platform/x86/mlx-platform.c:555:32: warning: variable
'mlxplat_mlxcpld_msn201x_items' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static struct mlxreg_core_item mlxplat_mlxcpld_msn201x_items[] = {
                               ^
1 warning generated.

It appears this was a copy and paste mistake from when this item was
first added. Use the definition in mlxplat_mlxcpld_msn201x_data so that
Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/141
Fixes: a49a41482f61 ("platform/x86: mlx-platform: Add support for new msn201x system type")
Signed-off-by: Nathan Chancellor 
Acked-by: Vadim Pasternak 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Sasha Levin

platform/x86: pmc_atom: Add Siemens SIMATIC IPC227E to critclk_systems DMI table

2019-11-10T10:27:55+00:00

commit ad0d315b4d4e7138f43acf03308192ec00e9614d upstream.

The SIMATIC IPC227E uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this device
to the critical systems list.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Jan Kiszka 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

platform/x86: Fix config space access for intel_atomisp2_pm

2019-11-06T12:05:25+00:00

[ Upstream commit 6a31061833a52a79c99221b6251db08cf377470e ]

We lose even config space access when we power gate the ISP
via the PUNIT. That makes lspci & co. produce gibberish.

To fix that let's try to implement actual runtime pm hooks
and inform the pci core that the device always goes to
D3cold. That will cause the pci core to resume the device
before attempting config space access.

This introduces another annoyance though. We get the
following error every time we try to resume the device:
intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3

The reason being that the pci core tries to put the device
back into D0 via the standard PCI PM mechanism before
calling the driver resume hook. To fix this properly
we'd need to infiltrate the platform pm hooks (could
turn ugly real fast), or use pm domains (which don't
seem to exist on x86), or some extra early resume
hook for the driver (which doesn't exist either).
So maybe we just choose to live with the error?

Cc: Hans de Goede 
Cc: Alan Cox 
Cc: Andy Shevchenko 
Cc: Darren Hart 
Signed-off-by: Ville Syrjälä 
Signed-off-by: Andy Shevchenko 
Reviewed-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: Add the VLV ISP PCI ID to atomisp2_pm

2019-11-06T12:05:25+00:00

[ Upstream commit 8a7d7141528ad67e465bc6afacc6a3144d1fe320 ]

If the ISP is exposed as a PCI device VLV machines need the
same treatment as CHV machines to power gate the ISP. Otherwise
s0ix will not work.

Cc: Hans de Goede 
Cc: Alan Cox 
Cc: Andy Shevchenko 
Cc: Darren Hart 
Signed-off-by: Ville Syrjälä 
Reviewed-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Sasha Levin

platform/x86: intel_pmc_core: Do not ioremap RAM

2019-10-05T11:09:55+00:00

[ Upstream commit 7d505758b1e556cdf65a5e451744fe0ae8063d17 ]

On a Xen-based PVH virtual machine with more than 4 GiB of RAM,
intel_pmc_core fails initialization with the following warning message
from the kernel, indicating that the driver is attempting to ioremap
RAM:

  ioremap on RAM at 0x00000000fe000000 - 0x00000000fe001fff
  WARNING: CPU: 1 PID: 434 at arch/x86/mm/ioremap.c:186 __ioremap_caller.constprop.0+0x2aa/0x2c0
...
  Call Trace:
   ? pmc_core_probe+0x87/0x2d0 [intel_pmc_core]
   pmc_core_probe+0x87/0x2d0 [intel_pmc_core]

This issue appears to manifest itself because of the following fallback
mechanism in the driver:

	if (lpit_read_residency_count_address(&slp_s0_addr))
		pmcdev->base_addr = PMC_BASE_ADDR_DEFAULT;

The validity of address PMC_BASE_ADDR_DEFAULT (i.e., 0xFE000000) is not
verified by the driver, which is what this patch introduces. With this
patch, if address PMC_BASE_ADDR_DEFAULT is in RAM, then the driver will
not attempt to ioremap the aforementioned address.

Signed-off-by: M. Vefa Bicakci 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Sasha Levin