[ Upstream commit edd45cba5ed7f53974475ddc9a1453c2c87b3328 ]

Shift by one the registers for tachometers (7 - 12).

This fix is relevant for the same new systems MQMB7, MSN37, MSN34,
which are about to be released to the customers.
At the moment, none of them is at customers sites. The customers will
not suffer from this change.
This fix is necessary, because register used before for tachometer 7
has been than reserved for the second PWM for newer systems, which are
not supported yet in mlx-platform driver. So registers of tachometers
7-12 have been shifted by one.

Fixes: 0378123c5800 ("platform/x86: mlx-platform: Add mlxreg-fan platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6ad16b78a039b45294b1ad5d69c14ac57b2fe706 ]

EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of
reasons, and there are very few cases in which they should be treated as
wakeup interrupts (particularly, when a certain
MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the
mainline cros_ec_sensor driver yet). Most of the time, they are benign
sensor readings. In any case, the top-level cros_ec device doesn't know
enough to determine that they should wake the system, and so it should
not report the event. This would be the job of the cros_ec_sensors
driver to parse.

This patch adds checks to cros_ec_get_next_event() such that it doesn't
signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO.

This patch is particularly relevant on devices like Scarlet (Rockchip
RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware
reports sensor events much more frequently. This was causing
/sys/power/wakeup_count to increase very frequently, often needlessly
interrupting our ability to suspend the system.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 71b12beaf12f21a53bfe100795d0797f1035b570 ]

According to Asus firmware engineers, the meaning of these codes is only
to notify the OS that the screen brightness has been turned on/off by
the EC. This does not match the meaning of KEY_DISPLAYTOGGLE /
KEY_DISPLAY_OFF, where userspace is expected to change the display
brightness.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b3f2f3799a972d3863d0fdc2ab6287aef6ca631f ]

When the OS registers to handle events from the display off hotkey the
EC will send a notification with 0x35 for every key press, independent
of the backlight state.

The behavior of this key on Windows, with the ATKACPI driver from Asus
installed, is turning off the backlight of all connected displays with a
fading effect, and any cursor input or key press turning the backlight
back on. The key press or cursor input that wakes up the display is also
passed through to the application under the cursor or under focus.

The key that matches this behavior the closest is KEY_SCREENLOCK.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 78f3ac76d9e5219589718b9e4733bee21627b3f5 ]

In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.

Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.

Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.

 Scope (_SB)
 {
     (...)

     Device (ATKD)
     {
         (...)

         Name (_WDG, Buffer (0x28)
         {
             /* 0000 */  0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
             /* 0008 */  0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
             /* 0010 */  0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
             /* 0018 */  0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
             /* 0020 */  0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
         })
         Method (WMNB, 3, Serialized)
         {
             CreateDWordField (Arg2, Zero, IIA0)
             CreateDWordField (Arg2, 0x04, IIA1)
             Local0 = (Arg1 & 0xFFFFFFFF)

             (...)

             If ((Local0 == 0x53564544))
             {
                 (...)

                 If ((IIA0 == 0x00050011))
                 {
                     If ((IIA1 == 0x02))
                     {
                         ^^PCI0.SBRG.EC0.SPIN (0x72, One)
                         ^^PCI0.SBRG.EC0.BLCT = One
                     }

                     Return (One)
                 }
             }
             (...)
         }
         (...)
     }
     (...)
 }
 (...)

 Scope (_SB.PCI0.SBRG.EC0)
 {
     (...)

     Name (BLCT, Zero)

     (...)

     Method (_Q10, 0, NotSerialized)  // _Qxx: EC Query
     {
         If ((BLCT == Zero))
         {
             Local0 = One
             Local0 = RPIN (0x72)
             Local0 ^= One
             SPIN (0x72, Local0)
             If (ATKP)
             {
                 Local0 = (0x34 - Local0)
                 ^^^^ATKD.IANE (Local0)
             }
         }
         ElseIf ((BLCT == One))
         {
             If (ATKP)
             {
                 ^^^^ATKD.IANE (0x35)
             }
         }
     }
     (...)
 }

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 684238d79ad85c5e19a71bb5818e77e329912fbc ]

To fix:

  acerhdf: unknown (unsupported) BIOS version Gateway  /LT31   /v1.3307 , please report, aborting!

As can be seen in the context, the BIOS registers haven't changed in
the previous versions, so the assumption is they won't have changed
in this last update for this somewhat older platform either.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8d98b1ef368feeb7720b8b9b6f3bd93f2ad892bc ]

On some Goldmont based systems such as ASRock J3455M the BIOS may not
enable the IPC1 device that provides access to the PMC and PUNIT. In
such scenarios, the IOSS and PSS resources from the platform device can
not be obtained and result in a invalid telemetry_plt_config which is an
internal data structure that holds platform config and is maintained by
the telemetry platform driver.

This is also applicable to the platforms where the BIOS supports IPC1
device under debug configurations but IPC1 is disabled by user or the
policy.

This change allows user to know the reason for not seeing entries under
/sys/kernel/debug/telemetry/* when there is no apparent failure at boot.

Cc: Matt Turner <matt.turner@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779
Acked-by: Matt Turner <matt.turner@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Commit 57e94c8b974db2d83c60e1139c89a70806abbea0 caused cros-ec keyboard events
be truncated on many chromebooks so that Left and Right keys on Column 12 were
always 0. Use ret as memcpy len to fix this.

The old code was using ec_dev->event_size, which is the event payload/data size
excluding event_type header, for the length of the memcpy operation. Use ret
as memcpy length to avoid the off by one and copy the whole msg->data.

Fixes: 57e94c8b974d ("mfd: cros-ec: Increase maximum mkbp event size")

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Karlson <jekarlson@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>

An ACPI buffer that was allocated was not being freed after use.

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

ACPI buffers were being allocated but never freed.

Reported-by: Pinzhen Xu <pinzhen.xu@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>