linux-stable.git/drivers/platform, branch v4.14.166 Linux kernel stable tree platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0 2020-01-17T18:45:47+00:00 Jian-Hong Pan jian-hong@endlessm.com 2019-12-30T08:30:45+00:00 c2d4a986f979d4004be7f5a3460bc0f0b8f41c02 commit 176a7fca81c5090a7240664e3002c106d296bf31 upstream. Some of ASUS laptops like UX431FL keyboard backlight cannot be set to brightness 0. According to ASUS' information, the brightness should be 0x80 ~ 0x83. This patch fixes it by following the logic. Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support") Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 176a7fca81c5090a7240664e3002c106d296bf31 upstream.

Some of ASUS laptops like UX431FL keyboard backlight cannot be set to
brightness 0. According to ASUS' information, the brightness should be
0x80 ~ 0x83. This patch fixes it by following the logic.

Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table 2020-01-09T09:17:57+00:00 Michael Haener michael.haener@siemens.com 2019-11-29T09:16:49+00:00 4d445d3e83f208fa0c8b533915e9645353100ff5 commit e8796c6c69d129420ee94a1906b18d86b84644d4 upstream. The CONNECT X300 uses the PMC clock for on-board components and gets stuck during boot if the clock is disabled. Therefore, add this device to the critical systems list. Tested on CONNECT X300. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Michael Haener <michael.haener@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e8796c6c69d129420ee94a1906b18d86b84644d4 upstream.

The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes 2019-12-31T11:37:58+00:00 Hans de Goede hdegoede@redhat.com 2019-12-17T19:06:04+00:00 6cc3ecc1ac2364cddd8bf44dcfdd6123dd63d14c commit 133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream. At least on the HP Envy x360 15-cp0xxx model the WMI interface for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes, otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS): Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5 We do not care about the contents of the buffer, we just want to know if the HPWMI_FEATURE2_QUERY command is supported. This commits bumps the buffer size, fixing the error. Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable") Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream.

At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):

Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5

We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.

This commits bumps the buffer size, fixing the error.

Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size 2019-12-05T14:38:35+00:00 Hans de Goede hdegoede@redhat.com 2019-11-22T18:56:41+00:00 6d4408556902692f348e599819cd3ea0587edb19 commit f3e4f3fc8ee9729c4b1b27a478c68b713df53c0c upstream. The AML code implementing the WMI methods creates a variable length field to hold the input data we pass like this: CreateDWordField (Arg1, 0x0C, DSZI) Local5 = DSZI /* \HWMC.DSZI */ CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) If we pass 0 as bios_args.datasize argument then (Local5 * 0x08) is 0 which results in these errors: [ 71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133) [ 71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) [ 71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for read commands where extra input is needed to specify exactly what to read. So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected output as insize to hp_wmi_perform_query(), as we are already doing for all other HPWMI_READ commands we send. Doing so fixes these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f3e4f3fc8ee9729c4b1b27a478c68b713df53c0c upstream.

The AML code implementing the WMI methods creates a variable length
field to hold the input data we pass like this:

        CreateDWordField (Arg1, 0x0C, DSZI)
        Local5 = DSZI /* \HWMC.DSZI */
        CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)

If we pass 0 as bios_args.datasize argument then (Local5 * 0x08)
is 0 which results in these errors:

[   71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133)
[   71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)
[   71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)

And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands
like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for
read commands where extra input is needed to specify exactly what to read.

So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected
output as insize to hp_wmi_perform_query(), as we are already doing for all
other HPWMI_READ commands we send. Doing so fixes these errors.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer 2019-12-05T14:38:34+00:00 Hans de Goede hdegoede@redhat.com 2019-11-22T18:56:40+00:00 591547ec35c1a8f19f0fd584dd610d184c9f1b9d commit 16245db1489cd9aa579506f64afeeeb13d825a93 upstream. The HP WMI calls may take up to 128 bytes of data as input, and the AML methods implementing the WMI calls, declare a couple of fields for accessing input in different sizes, specifycally the HWMC method contains: CreateField (Arg1, 0x80, 0x0400, D128) Even though we do not use any of the WMI command-types which need a buffer of this size, the APCI interpreter still tries to create it as it is declared in generoc code at the top of the HWMC method which runs before the code looks at which command-type is requested. This results in many of these errors on many different HP laptop models: [ 14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236) [ 14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543) [ 14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543) This commit increases the size of the data element of the bios_args struct to 128 bytes fixing these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 16245db1489cd9aa579506f64afeeeb13d825a93 upstream.

The HP WMI calls may take up to 128 bytes of data as input, and
the AML methods implementing the WMI calls, declare a couple of fields for
accessing input in different sizes, specifycally the HWMC method contains:

        CreateField (Arg1, 0x80, 0x0400, D128)

Even though we do not use any of the WMI command-types which need a buffer
of this size, the APCI interpreter still tries to create it as it is
declared in generoc code at the top of the HWMC method which runs before
the code looks at which command-type is requested.

This results in many of these errors on many different HP laptop models:

[   14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236)
[   14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
[   14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543)

This commit increases the size of the data element of the bios_args struct
to 128 bytes fixing these errors.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi 2019-12-01T08:13:16+00:00 Hans de Goede hdegoede@redhat.com 2019-06-12T07:02:02+00:00 efb868d452dd1724007c9b3310d2062a53472a97 [ Upstream commit 401fee8195d401b2b94dee57383f627050724d5b ] Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") causes the backlight to be permanently off on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC 1015BX, Asus EeePC 1025C). The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added by that commit is made conditional in this commit and only enabled in the quirk_entry structs in the asus-nb-wmi driver fixing the broken display / backlight on various EeePC laptop models. Cc: João Paulo Rechi Vita <jprvita@endlessm.com> Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 401fee8195d401b2b94dee57383f627050724d5b ]

Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).

The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.

Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
platform/x86: asus-nb-wmi: Support ALS on the Zenbook UX430UQ 2019-12-01T08:13:15+00:00 Kiernan Hager kah.listaddress@gmail.com 2017-11-20T21:18:44+00:00 7aaf04476a050a4a20f18d89748ff2906a9390b6 [ Upstream commit db2582afa7444a0ce6bb1ebf1431715969a10b06 ] This patch adds support for ALS on the Zenbook UX430UQ to the asus_nb_wmi driver. It also renames "quirk_asus_ux330uak" to "quirk_asus_forceals" because it is now used for more than one model of computer, and should thus have a more general name. Signed-off-by: Kiernan Hager <kah.listaddress@gmail.com> [andy: massaged commit message, fixed indentation and commas in the code] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit db2582afa7444a0ce6bb1ebf1431715969a10b06 ]

This patch adds support for ALS on the Zenbook UX430UQ to the asus_nb_wmi
driver. It also renames "quirk_asus_ux330uak" to "quirk_asus_forceals"
because it is now used for more than one model of computer, and should
thus have a more general name.

Signed-off-by: Kiernan Hager <kah.listaddress@gmail.com>
[andy: massaged commit message, fixed indentation and commas in the code]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
platform/x86: pmc_atom: Add Siemens SIMATIC IPC227E to critclk_systems DMI table 2019-11-10T10:25:39+00:00 Jan Kiszka jan.kiszka@siemens.com 2019-09-04T06:42:30+00:00 6434e433ef0a380b3e1c7ce6f773962030aae614 commit ad0d315b4d4e7138f43acf03308192ec00e9614d upstream. The SIMATIC IPC227E uses the PMC clock for on-board components and gets stuck during boot if the clock is disabled. Therefore, add this device to the critical systems list. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ad0d315b4d4e7138f43acf03308192ec00e9614d upstream.

The SIMATIC IPC227E uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this device
to the critical systems list.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/x86: pmc_atom: Add CB4063 Beckhoff Automation board to critclk_systems DMI table 2019-09-19T07:08:08+00:00 Steffen Dirkwinkel s.dirkwinkel@beckhoff.com 2019-06-18T13:31:02+00:00 a75883f402214561a4e584d37d89a96a1f6931e8 commit 9452fbf5c6cf5f470e0748fe7a14a683e7765f7a upstream. The CB4063 board uses pmc_plt_clk* clocks for ethernet controllers. This adds it to the critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and not turned off. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9452fbf5c6cf5f470e0748fe7a14a683e7765f7a upstream.

The CB4063 board uses pmc_plt_clk* clocks for ethernet controllers. This
adds it to the critclk_systems DMI table so the clocks are marked as
CLK_CRITICAL and not turned off.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration 2019-07-10T07:54:35+00:00 Vadim Pasternak vadimp@mellanox.com 2019-06-05T07:51:03+00:00 1e25d82d9d62341865cbb0c9d9baa1d12ccd9cb1 [ Upstream commit 160da20b254dd4bfc5828f12c208fa831ad4be6c ] Fix the issue found while running kernel with the option CONFIG_DEBUG_TEST_DRIVER_REMOVE. Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers few underlying 'i2c-mux-reg' devices: priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr, NULL, 0); ... for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { priv->pdev_mux[i] = platform_device_register_resndata( &mlxplat_dev->dev, "i2c-mux-reg", i, NULL, 0, &mlxplat_mux_data[i], sizeof(mlxplat_mux_data[i])); But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and not mlxplat_dev->dev. Patch fixes parent device parameter in a call to platform_device_register_resndata() for "i2c-mux-reg". It solves the race during initialization flow while 'i2c_mlxcpld.1' is removing after probe, while 'i2c-mux-reg.0' is still in probing flow: 'i2c_mlxcpld.1' flow: probe -> remove -> probe. 'i2c-mux-reg.0' flow: probe -> ... [ 12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform [ 12:621117] device: 'i2c_mlxcpld.1': device_add [ 12:621155] bus: 'platform': add device i2c_mlxcpld.1 [ 12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat [ 12:621395] device: 'i2c-mux-reg.0': device_add [ 12:621425] bus: 'platform': add device i2c-mux-reg.0 [ 12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat [ 12:621828] device: 'i2c-mux-reg.1': device_add [ 12:621892] bus: 'platform': add device i2c-mux-reg.1 [ 12:621906] bus: 'platform': add driver i2c_mlxcpld [ 12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld [ 12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1 [ 12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state [ 12:622293] device: 'i2c-1': device_add [ 12:627280] bus: 'i2c': add device i2c-1 [ 12:627692] device: 'i2c-1': device_add [ 12.629639] bus: 'platform': add driver i2c-mux-reg [ 12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.629986] platform i2c-mux-reg.0: Added to deferred list [ 12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.630252] platform i2c-mux-reg.1: Added to deferred list [ 12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.640900] platform i2c-mux-reg.0: Retrying from deferred list [ 12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.641187] platform i2c-mux-reg.0: Added to deferred list [ 12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list [ 12.641219] platform i2c-mux-reg.1: Retrying from deferred list [ 12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.641469] platform i2c-mux-reg.1: Added to deferred list [ 12.646427] device: 'i2c-1': device_add [ 12.646647] bus: 'i2c': add device i2c-1 [ 12.647104] device: 'i2c-1': device_add [ 12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.669240] platform i2c-mux-reg.0: Retrying from deferred list [ 12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.669585] device: 'i2c-2': device_add [ 12.669795] bus: 'i2c': add device i2c-2 [ 12.670201] device: 'i2c-2': device_add [ 12.671427] i2c i2c-1: Added multiplexed i2c bus 2 [ 12.671514] device: 'i2c-3': device_add [ 12.671724] bus: 'i2c': add device i2c-3 [ 12.672136] device: 'i2c-3': device_add [ 12.673378] i2c i2c-1: Added multiplexed i2c bus 3 [ 12.673472] device: 'i2c-4': device_add [ 12.673676] bus: 'i2c': add device i2c-4 [ 12.674060] device: 'i2c-4': device_add [ 12.675861] i2c i2c-1: Added multiplexed i2c bus 4 [ 12.675941] device: 'i2c-5': device_add [ 12.676150] bus: 'i2c': add device i2c-5 [ 12.676550] device: 'i2c-5': device_add [ 12.678103] i2c i2c-1: Added multiplexed i2c bus 5 [ 12.678193] device: 'i2c-6': device_add [ 12.678395] bus: 'i2c': add device i2c-6 [ 12.678774] device: 'i2c-6': device_add [ 12.679969] i2c i2c-1: Added multiplexed i2c bus 6 [ 12.680065] device: 'i2c-7': device_add [ 12.680275] bus: 'i2c': add device i2c-7 [ 12.680913] device: 'i2c-7': device_add [ 12.682506] i2c i2c-1: Added multiplexed i2c bus 7 [ 12.682600] device: 'i2c-8': device_add [ 12.682808] bus: 'i2c': add device i2c-8 [ 12.683189] device: 'i2c-8': device_add [ 12.683907] device: 'i2c-1': device_unregister [ 12.683945] device: 'i2c-1': device_unregister [ 12.684387] device: 'i2c-1': device_create_release [ 12.684536] bus: 'i2c': remove device i2c-1 [ 12.686019] i2c i2c-8: Failed to create compatibility class link [ 12.686086] ------------[ cut here ]------------ [ 12.686087] can't create symlink to mux device [ 12.686224] Workqueue: events deferred_probe_work_func [ 12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 0x190/0x190 [i2c_mux] [ 12.686300] ? i2c_mux_alloc+0xac/0x110 [i2c_mux] [ 12.686306] ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg] [ 12.686313] i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg] [ 12.686322] ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg] [ 12.686346] platform_drv_probe+0xa8/0x110 [ 12.686351] really_probe+0x185/0x720 [ 12.686358] driver_probe_device+0xdf/0x1f0 ... [ 12.686522] i2c i2c-1: Added multiplexed i2c bus 8 [ 12.686621] device: 'i2c-9': device_add [ 12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1) [ 12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2) [ 12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2) [ 12.714494] device: 'i2c-8': device_unregister [ 12.714537] device: 'i2c-8': device_unregister Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 160da20b254dd4bfc5828f12c208fa831ad4be6c ]

Fix the issue found while running kernel with the option
CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers
few underlying 'i2c-mux-reg' devices:
	priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr,
							 NULL, 0);
	...
	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
		priv->pdev_mux[i] = platform_device_register_resndata(
						&mlxplat_dev->dev,
						"i2c-mux-reg", i, NULL,
						0, &mlxplat_mux_data[i],
						sizeof(mlxplat_mux_data[i]));

But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and
not mlxplat_dev->dev.
Patch fixes parent device parameter in a call to
platform_device_register_resndata() for "i2c-mux-reg".

It solves the race during initialization flow while 'i2c_mlxcpld.1' is
removing after probe, while 'i2c-mux-reg.0' is still in probing flow:
'i2c_mlxcpld.1'	flow:	probe -> remove -> probe.
'i2c-mux-reg.0'	flow:		  probe -> ...

[   12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform
[   12:621117] device: 'i2c_mlxcpld.1': device_add
[   12:621155] bus: 'platform': add device i2c_mlxcpld.1
[   12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat
[   12:621395] device: 'i2c-mux-reg.0': device_add
[   12:621425] bus: 'platform': add device i2c-mux-reg.0
[   12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat
[   12:621828] device: 'i2c-mux-reg.1': device_add
[   12:621892] bus: 'platform': add device i2c-mux-reg.1
[   12:621906] bus: 'platform': add driver i2c_mlxcpld
[   12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld
[   12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1
[   12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state
[   12:622293] device: 'i2c-1': device_add
[   12:627280] bus: 'i2c': add device i2c-1
[   12:627692] device: 'i2c-1': device_add
[   12.629639] bus: 'platform': add driver i2c-mux-reg
[   12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[   12.629986] platform i2c-mux-reg.0: Added to deferred list
[   12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[   12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[   12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[   12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[   12.630252] platform i2c-mux-reg.1: Added to deferred list
[   12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list
[   12.640900] platform i2c-mux-reg.0: Retrying from deferred list
[   12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[   12.641187] platform i2c-mux-reg.0: Added to deferred list
[   12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list
[   12.641219] platform i2c-mux-reg.1: Retrying from deferred list
[   12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[   12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[   12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[   12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[   12.641469] platform i2c-mux-reg.1: Added to deferred list
[   12.646427] device: 'i2c-1': device_add
[   12.646647] bus: 'i2c': add device i2c-1
[   12.647104] device: 'i2c-1': device_add
[   12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list
[   12.669240] platform i2c-mux-reg.0: Retrying from deferred list
[   12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.669585] device: 'i2c-2': device_add
[   12.669795] bus: 'i2c': add device i2c-2
[   12.670201] device: 'i2c-2': device_add
[   12.671427] i2c i2c-1: Added multiplexed i2c bus 2
[   12.671514] device: 'i2c-3': device_add
[   12.671724] bus: 'i2c': add device i2c-3
[   12.672136] device: 'i2c-3': device_add
[   12.673378] i2c i2c-1: Added multiplexed i2c bus 3
[   12.673472] device: 'i2c-4': device_add
[   12.673676] bus: 'i2c': add device i2c-4
[   12.674060] device: 'i2c-4': device_add
[   12.675861] i2c i2c-1: Added multiplexed i2c bus 4
[   12.675941] device: 'i2c-5': device_add
[   12.676150] bus: 'i2c': add device i2c-5
[   12.676550] device: 'i2c-5': device_add
[   12.678103] i2c i2c-1: Added multiplexed i2c bus 5
[   12.678193] device: 'i2c-6': device_add
[   12.678395] bus: 'i2c': add device i2c-6
[   12.678774] device: 'i2c-6': device_add
[   12.679969] i2c i2c-1: Added multiplexed i2c bus 6
[   12.680065] device: 'i2c-7': device_add
[   12.680275] bus: 'i2c': add device i2c-7
[   12.680913] device: 'i2c-7': device_add
[   12.682506] i2c i2c-1: Added multiplexed i2c bus 7
[   12.682600] device: 'i2c-8': device_add
[   12.682808] bus: 'i2c': add device i2c-8
[   12.683189] device: 'i2c-8': device_add
[   12.683907] device: 'i2c-1': device_unregister
[   12.683945] device: 'i2c-1': device_unregister
[   12.684387] device: 'i2c-1': device_create_release
[   12.684536] bus: 'i2c': remove device i2c-1
[   12.686019] i2c i2c-8: Failed to create compatibility class link
[   12.686086] ------------[ cut here ]------------
[   12.686087] can't create symlink to mux device
[   12.686224] Workqueue: events deferred_probe_work_func
[   12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[   12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[   0x190/0x190 [i2c_mux]
[   12.686300]  ? i2c_mux_alloc+0xac/0x110 [i2c_mux]
[   12.686306]  ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg]
[   12.686313]  i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg]
[   12.686322]  ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg]
[   12.686346]  platform_drv_probe+0xa8/0x110
[   12.686351]  really_probe+0x185/0x720
[   12.686358]  driver_probe_device+0xdf/0x1f0
...
[   12.686522] i2c i2c-1: Added multiplexed i2c bus 8
[   12.686621] device: 'i2c-9': device_add
[   12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1)
[   12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2)
[   12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2)
[   12.714494] device: 'i2c-8': device_unregister
[   12.714537] device: 'i2c-8': device_unregister

Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>