linux-stable.git/drivers/pinctrl, branch v6.6.78 Linux kernel stable tree pinctrl: samsung: fix fwnode refcount cleanup if platform_get_irq_optional() fails 2025-02-17T08:40:40+00:00 Javier Carrasco javier.carrasco.cruz@gmail.com 2024-11-06T22:04:39+00:00 0228e5a6672dcf1f29ec1caf396466c28432dfa0 commit 459915f55509f4bfd6076daa1428e28490ddee3b upstream. Commit 50ebd19e3585 ("pinctrl: samsung: drop pin banks references on error paths") fixed the pin bank references on the error paths of the probe function, but there is still an error path where this is not done. If samsung_pinctrl_get_soc_data() does not fail, the child references will have acquired, and they will need to be released in the error path of platform_get_irq_optional(), as it is done in the following error paths within the probe function. Replace the direct return in the error path with a goto instruction to the cleanup function. Cc: stable@vger.kernel.org Fixes: a382d568f144 ("pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241106-samsung-pinctrl-put-v1-1-de854e26dd03@gmail.com [krzysztof: change Fixes SHA to point to commit introducing the return leading to OF node leak] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 459915f55509f4bfd6076daa1428e28490ddee3b upstream.

Commit 50ebd19e3585 ("pinctrl: samsung: drop pin banks references on
error paths") fixed the pin bank references on the error paths of the
probe function, but there is still an error path where this is not done.

If samsung_pinctrl_get_soc_data() does not fail, the child references
will have acquired, and they will need to be released in the error path
of platform_get_irq_optional(), as it is done in the following error
paths within the probe function.

Replace the direct return in the error path with a goto instruction to
the cleanup function.

Cc: stable@vger.kernel.org
Fixes: a382d568f144 ("pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241106-samsung-pinctrl-put-v1-1-de854e26dd03@gmail.com
[krzysztof: change Fixes SHA to point to commit introducing the return
 leading to OF node leak]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: amd: Take suspend type into consideration which pins are non-wake 2025-02-08T08:52:08+00:00 Maciej S. Szmigiero mail@maciej.szmigiero.name 2025-01-06T17:41:15+00:00 01220c10a7f48014381b3d9879ce5732744f25fc [ Upstream commit f31f33dbb3bab572bad9fe7b849ab0dcbe6fd279 ] Some laptops have pins which are a wake source for S0i3/S3 but which aren't a wake source for S4/S5 and which cause issues when left unmasked during hibernation (S4). For example HP EliteBook 855 G7 has pin #24 that causes instant wakeup (hibernation failure) if left unmasked (it is a wake source only for S0i3/S3). GPIO pin #24 on this platform is likely dedicated to WWAN XMM7360 modem since this pin triggers wake notify to WWAN modem's parent PCIe port. Fix this by considering a pin a wake source only if it is marked as one for the current suspend type (S0i3/S3 vs S4/S5). Since Z-wake pins only make sense at runtime these were excluded from both of suspend categories, so pins with only the Z-wake flag set are effectively treated as non-wake pins. Fixes: 2fff0b5e1a6b ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f31f33dbb3bab572bad9fe7b849ab0dcbe6fd279 ]

Some laptops have pins which are a wake source for S0i3/S3 but which
aren't a wake source for S4/S5 and which cause issues when left unmasked
during hibernation (S4).

For example HP EliteBook 855 G7 has pin #24 that causes instant wakeup
(hibernation failure) if left unmasked (it is a wake source only for
S0i3/S3).
GPIO pin #24 on this platform is likely dedicated to WWAN XMM7360
modem since this pin triggers wake notify to WWAN modem's parent PCIe
port.

Fix this by considering a pin a wake source only if it is marked as one
for the current suspend type (S0i3/S3 vs S4/S5).

Since Z-wake pins only make sense at runtime these were excluded from
both of suspend categories, so pins with only the Z-wake flag set are
effectively treated as non-wake pins.

Fixes: 2fff0b5e1a6b ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend")
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: stm32: Add check for clk_enable() 2025-02-08T08:52:08+00:00 Mingwei Zheng zmw12306@gmail.com 2025-01-06T22:06:59+00:00 3872b4eec88a61874a488ffd5e5fcd865ae01eb6 [ Upstream commit 451bc9aea9a1a6fe53969e81a5cb1bd785c0d989 ] Convert the driver to clk_bulk*() API. Add check for the return value of clk_bulk_enable() to catch the potential error. Fixes: 05d8af449d93 ("pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested") Signed-off-by: Mingwei Zheng <zmw12306@gmail.com> Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/20250106220659.2640365-1-zmw12306@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 451bc9aea9a1a6fe53969e81a5cb1bd785c0d989 ]

Convert the driver to clk_bulk*() API.
Add check for the return value of clk_bulk_enable() to catch
the potential error.

Fixes: 05d8af449d93 ("pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested")
Signed-off-by: Mingwei Zheng <zmw12306@gmail.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/20250106220659.2640365-1-zmw12306@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
of: remove internal arguments from of_property_for_each_u32() 2025-02-08T08:51:51+00:00 Luca Ceresoli luca.ceresoli@bootlin.com 2024-07-24T16:33:06+00:00 914ef7d1a702c510d0b59151a9623f9d20c69d2a [ Upstream commit 9722c3b66e21ff08aec570d02a97d331087fd70f ] The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Stable-dep-of: 28fa3291cad1 ("clk: fix an OF node reference leak in of_clk_get_parent_name()") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9722c3b66e21ff08aec570d02a97d331087fd70f ]

The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.

Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:

  struct property *prop;
  const __be32 *p;
  u32 val;

  of_property_for_each_u32(np, "xyz", prop, p, val) { ... }

to this:

  u32 val;

  of_property_for_each_u32(np, "xyz", val) { ... }

However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.

Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:

 - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
 - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
   checks had to be replicated in a different way, making code more verbose
   and somewhat uglier, but I refrained from a full rework to keep as much
   of the original code untouched having no hardware to test my changes

All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.

Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: 28fa3291cad1 ("clk: fix an OF node reference leak in of_clk_get_parent_name()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking 2025-01-09T12:32:07+00:00 Evgenii Shatokhin e.shatokhin@yadro.com 2024-12-09T07:46:59+00:00 8c6fd5803b988a5e78c9b9e42c70a936d7cfc6ec commit a37eecb705f33726f1fb7cd2a67e514a15dfe693 upstream. If a device uses MCP23xxx IO expander to receive IRQs, the following bug can happen: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ... preempt_count: 1, expected: 0 ... Call Trace: ... __might_resched+0x104/0x10e __might_sleep+0x3e/0x62 mutex_lock+0x20/0x4c regmap_lock_mutex+0x10/0x18 regmap_update_bits_base+0x2c/0x66 mcp23s08_irq_set_type+0x1ae/0x1d6 __irq_set_trigger+0x56/0x172 __setup_irq+0x1e6/0x646 request_threaded_irq+0xb6/0x160 ... We observed the problem while experimenting with a touchscreen driver which used MCP23017 IO expander (I2C). The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from concurrent accesses, which is the default for regmaps without .fast_io, .disable_locking, etc. mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter locks the mutex. However, __setup_irq() locks desc->lock spinlock before calling these functions. As a result, the system tries to lock the mutex whole holding the spinlock. It seems, the internal regmap locks are not needed in this driver at all. mcp->lock seems to protect the regmap from concurrent accesses already, except, probably, in mcp_pinconf_get/set. mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes mcp->lock and enables regmap caching, so that the potentially slow I2C accesses are deferred until chip_bus_unlock(). The accesses to the regmap from mcp23s08_probe_one() do not need additional locking. In all remaining places where the regmap is accessed, except mcp_pinconf_get/set(), the driver already takes mcp->lock. This patch adds locking in mcp_pinconf_get/set() and disables internal locking in the regmap config. Among other things, it fixes the sleeping in atomic context described above. Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Cc: stable@vger.kernel.org Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/20241209074659.1442898-1-e.shatokhin@yadro.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a37eecb705f33726f1fb7cd2a67e514a15dfe693 upstream.

If a device uses MCP23xxx IO expander to receive IRQs, the following
bug can happen:

  BUG: sleeping function called from invalid context
    at kernel/locking/mutex.c:283
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ...
  preempt_count: 1, expected: 0
  ...
  Call Trace:
  ...
  __might_resched+0x104/0x10e
  __might_sleep+0x3e/0x62
  mutex_lock+0x20/0x4c
  regmap_lock_mutex+0x10/0x18
  regmap_update_bits_base+0x2c/0x66
  mcp23s08_irq_set_type+0x1ae/0x1d6
  __irq_set_trigger+0x56/0x172
  __setup_irq+0x1e6/0x646
  request_threaded_irq+0xb6/0x160
  ...

We observed the problem while experimenting with a touchscreen driver which
used MCP23017 IO expander (I2C).

The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from
concurrent accesses, which is the default for regmaps without .fast_io,
.disable_locking, etc.

mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter
locks the mutex.

However, __setup_irq() locks desc->lock spinlock before calling these
functions. As a result, the system tries to lock the mutex whole holding
the spinlock.

It seems, the internal regmap locks are not needed in this driver at all.
mcp->lock seems to protect the regmap from concurrent accesses already,
except, probably, in mcp_pinconf_get/set.

mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under
chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes
mcp->lock and enables regmap caching, so that the potentially slow I2C
accesses are deferred until chip_bus_unlock().

The accesses to the regmap from mcp23s08_probe_one() do not need additional
locking.

In all remaining places where the regmap is accessed, except
mcp_pinconf_get/set(), the driver already takes mcp->lock.

This patch adds locking in mcp_pinconf_get/set() and disables internal
locking in the regmap config. Among other things, it fixes the sleeping
in atomic context described above.

Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching")
Cc: stable@vger.kernel.org
Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/20241209074659.1442898-1-e.shatokhin@yadro.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: qcom: spmi-mpp: Add PM8937 compatible 2024-12-14T19:00:12+00:00 Barnabás Czémán barnabas.czeman@mainlining.org 2024-10-31T01:19:45+00:00 03bf88b1e95d3cfb4325f5af9883314a75e6d723 [ Upstream commit f755261190e88f5d19fe0a3b762f0bbaff6bd438 ] The PM8937 provides 4 MPPs. Add a compatible to support them. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/20241031-msm8917-v2-4-8a075faa89b1@mainlining.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f755261190e88f5d19fe0a3b762f0bbaff6bd438 ]

The PM8937 provides 4 MPPs.
Add a compatible to support them.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-4-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: qcom-pmic-gpio: add support for PM8937 2024-12-14T19:00:12+00:00 Barnabás Czémán barnabas.czeman@mainlining.org 2024-10-31T01:19:43+00:00 b377ef01a3d9f777137a37c9b3f598e8bf62fefb [ Upstream commit 89265a58ff24e3885c2c9ca722bc3aaa47018be9 ] PM8937 has 8 GPIO-s with holes on GPIO3, GPIO4 and GPIO6. Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/20241031-msm8917-v2-2-8a075faa89b1@mainlining.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 89265a58ff24e3885c2c9ca722bc3aaa47018be9 ]

PM8937 has 8 GPIO-s with holes on GPIO3, GPIO4 and GPIO6.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-2-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinmux: Use sequential access to access desc->pinmux data 2024-12-14T19:00:11+00:00 Mukesh Ojha quic_mojha@quicinc.com 2024-10-14T19:29:30+00:00 2da32aed4a97ca1d70fb8b77926f72f30ce5fb4b [ Upstream commit 5a3e85c3c397c781393ea5fb2f45b1f60f8a4e6e ] When two client of the same gpio call pinctrl_select_state() for the same functionality, we are seeing NULL pointer issue while accessing desc->mux_owner. Let's say two processes A, B executing in pin_request() for the same pin and process A updates the desc->mux_usecount but not yet updated the desc->mux_owner while process B see the desc->mux_usecount which got updated by A path and further executes strcmp and while accessing desc->mux_owner it crashes with NULL pointer. Serialize the access to mux related setting with a mutex lock. cpu0 (process A) cpu1(process B) pinctrl_select_state() { pinctrl_select_state() { pin_request() { pin_request() { ... .... } else { desc->mux_usecount++; desc->mux_usecount && strcmp(desc->mux_owner, owner)) { if (desc->mux_usecount > 1) return 0; desc->mux_owner = owner; } } Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Link: https://lore.kernel.org/20241014192930.1539673-1-quic_mojha@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5a3e85c3c397c781393ea5fb2f45b1f60f8a4e6e ]

When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.

Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.

Serialize the access to mux related setting with a mutex lock.

	cpu0 (process A)			cpu1(process B)

pinctrl_select_state() {		  pinctrl_select_state() {
  pin_request() {				pin_request() {
  ...
						 ....
    } else {
         desc->mux_usecount++;
    						desc->mux_usecount && strcmp(desc->mux_owner, owner)) {

         if (desc->mux_usecount > 1)
               return 0;
         desc->mux_owner = owner;

  }						}

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/20241014192930.1539673-1-quic_mojha@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU 2024-12-14T19:00:10+00:00 Esben Haabendal esben@geanix.com 2024-10-03T09:23:09+00:00 1cbb632b515aa898068a2d12f7e80652ae92c8ec [ Upstream commit 58414a31c5713afb5449fd74a26a843d34cc62e8 ] When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU dependency could not be enabled. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410031439.GyTSa0kX-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202410030852.q0Hukplf-lkp@intel.com/ Signed-off-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/20241003-imx-pinctrl-compile-test-fix-v1-1-145ca1948cc3@geanix.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 58414a31c5713afb5449fd74a26a843d34cc62e8 ]

When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM
combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU
dependency could not be enabled.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410031439.GyTSa0kX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410030852.q0Hukplf-lkp@intel.com/
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/20241003-imx-pinctrl-compile-test-fix-v1-1-145ca1948cc3@geanix.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: qcom: spmi: fix debugfs drive strength 2024-12-09T09:32:45+00:00 Johan Hovold johan+linaro@kernel.org 2024-10-25T12:16:22+00:00 6a4645bc3b14e027cea1e8f5d0df02efa7fc23b3 commit 6bc0ebfb1d920f13c522545f114cdabb49e9408a upstream. Commit 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping") fixed a long-standing issue in the Qualcomm SPMI PMIC gpio driver which had the 'low' and 'high' drive strength settings switched but failed to update the debugfs interface which still gets this wrong. Fix the debugfs code so that the exported values match the hardware settings. Note that this probably means that most devicetrees that try to describe the firmware settings got this wrong if the settings were derived from debugfs. Before the above mentioned commit the settings would have actually matched the firmware settings even if they were described incorrectly, but now they are inverted. Fixes: 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping") Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Cc: Anjelique Melendez <quic_amelende@quicinc.com> Cc: stable@vger.kernel.org # 3.19 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/20241025121622.1496-1-johan+linaro@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6bc0ebfb1d920f13c522545f114cdabb49e9408a upstream.

Commit 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength
mapping") fixed a long-standing issue in the Qualcomm SPMI PMIC gpio
driver which had the 'low' and 'high' drive strength settings switched
but failed to update the debugfs interface which still gets this wrong.

Fix the debugfs code so that the exported values match the hardware
settings.

Note that this probably means that most devicetrees that try to describe
the firmware settings got this wrong if the settings were derived from
debugfs. Before the above mentioned commit the settings would have
actually matched the firmware settings even if they were described
incorrectly, but now they are inverted.

Fixes: 723e8462a4fe ("pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping")
Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Cc: Anjelique Melendez <quic_amelende@quicinc.com>
Cc: stable@vger.kernel.org	# 3.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/20241025121622.1496-1-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>