s32_pmx_gpio_request_enable() does not initialize the newly-allocated
gpio_pin_config::list before adding it to s32_pinctrl::gpio_configs.
This could result in a linked list corruption.

Initialize the new list_head with INIT_LIST_HEAD() to fix this.

Fixes: fd84aaa8173d ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its
fields are initialized. Notably, num_custom_params is used in
pinconf_generic_parse_dt_config(), resulting in intermittent allocation
errors, such as the following splat when probing i2c-imx:

        WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300
        [...]
        Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT)
        [...]
        Call trace:
         __alloc_pages_noprof+0x290/0x300 (P)
         ___kmalloc_large_node+0x84/0x168
         __kmalloc_large_node_noprof+0x34/0x120
         __kmalloc_noprof+0x2ac/0x378
         pinconf_generic_parse_dt_config+0x68/0x1a0
         s32_dt_node_to_map+0x104/0x248
         dt_to_map_one_config+0x154/0x1d8
         pinctrl_dt_to_map+0x12c/0x280
         create_pinctrl+0x6c/0x270
         pinctrl_get+0xc0/0x170
         devm_pinctrl_get+0x50/0xa0
         pinctrl_bind_pins+0x60/0x2a0
         really_probe+0x60/0x3a0
        [...]
         __platform_driver_register+0x2c/0x40
         i2c_adap_imx_init+0x28/0xff8 [i2c_imx]
        [...]

This results in later parse failures that can cause issues in dependent
drivers:

        s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
        s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
        [...]
        pca953x 0-0022: failed writing register: -6
        i2c i2c-0: IMX I2C adapter registered
        s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
        s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
        i2c i2c-1: IMX I2C adapter registered
        s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
        s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
        i2c i2c-2: IMX I2C adapter registered

Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of
devm_kmalloc() in s32_pinctrl_probe(), which sets the previously
uninitialized fields to zero.

Fixes: fd84aaa8173d ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Tested-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Replace disable_irq() with disable_irq_nosync() in msm_pinmux_set_mux()
to prevent deadlock when wakeup IRQ is triggered on the same
GPIO being reconfigured.

The issue occurs when a wakeup IRQ is triggered on a GPIO and the IRQ
handler attempts to reconfigure the same GPIO's pinmux. In this scenario,
msm_pinmux_set_mux() calls disable_irq() which waits for the currently
running IRQ handler to complete, creating a circular dependency that
results in deadlock.

Using disable_irq_nosync() avoids waiting for the IRQ handler to
complete, preventing the deadlock condition while still properly
disabling the interrupt during pinmux reconfiguration.

Suggested-by: Prasad Sodagudi <prasad.sodagudi@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The driver calls fwnode_get_named_child_node() which takes a reference
on the child node, but never releases it, which causes a reference leak.

Fix by using devm_add_action_or_reset() to automatically release the
reference when the device is removed.

Fixes: d5282a539297 ("pinctrl: cs42l43: Add support for the cs42l43")
Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The pinctrl-rtd driver uses 'devm_regmap_init_mmio', which requires
'REGMAP_MMIO' to be enabled.

Without this selection, the build fails with an undefined reference:
aarch64-none-linux-gnu-ld: drivers/pinctrl/realtek/pinctrl-rtd.o: in
function rtd_pinctrl_probe': pinctrl-rtd.c:(.text+0x5a0): undefined
reference to __devm_regmap_init_mmio_clk'

Fix this by selecting 'REGMAP_MMIO' in the Kconfig.

Fixes: e99ce78030db ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The mt8189-pinctrl driver requires to probe that a device tree uses
in the device node the same names than mt8189_pinctrl_register_base_names
array. But they are not matching the required ones in the
"mediatek,mt8189-pinctrl" dt-bindings, leading to possible dtbs check
issues. The mt8189_pinctrl_register_base_names entry order is also
different.
So, align all mt8189_pinctrl_register_base_names entry names and order
on dt-bindings.

Fixes: a3fe1324c3c5 ("pinctrl: mediatek: Add pinctrl driver for mt8189")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The mt8196-pinctrl driver requires to probe that a device tree uses
in the device node the same names than mt8196_pinctrl_register_base_names
array. But they are not matching the required ones in the
"mediatek,mt8196-pinctrl" dt-bindings, leading to possible dtbs check
issues.
So, align all mt8196_pinctrl_register_base_names entries on dt-bindings
ones.

Fixes: f7a29377c253 ("pinctrl: mediatek: Add pinctrl driver on mt8196")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
     take config space accessor functions.

     Implement pci_find_capability(), pci_find_ext_capability(), and
     dwc, dwc endpoint, and cadence capability search interfaces with
     them (Hans Zhang)

   - Leave parent unit address 0 in 'interrupt-map' so that when we
     build devicetree nodes to describe PCI functions that contain
     multiple peripherals, we can build this property even when
     interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)

   - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
     Request Size to 128B to avoid a performance issue (Ilpo Järvinen)

   - Add sysfs 'serial_number' file to expose the Device Serial Number
     (Matthew Wood)

   - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)

  Resource management:

   - Align m68k pcibios_enable_device() with other arches (Ilpo
     Järvinen)

   - Remove sparc pcibios_enable_device() implementations that don't do
     anything beyond what pci_enable_resources() does (Ilpo Järvinen)

   - Remove mips pcibios_enable_resources() and use
     pci_enable_resources() instead (Ilpo Järvinen)

   - Clean up bridge window sizing and assignment (Ilpo Järvinen),
     including:

       - Leave non-claimed bridge windows disabled

       - Enable bridges even if a window wasn't assigned because not all
         windows are required by downstream devices

       - Preserve bridge window type when releasing the resource, since
         the type is needed for reassignment

       - Consolidate selection of bridge windows into two new
         interfaces, pbus_select_window() and
         pbus_select_window_for_type(), so this is done consistently

       - Compute bridge window start and end earlier to avoid logging
         stale information

  MSI:

   - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
     Vives)

  Error handling:

   - Align AER with EEH by allowing drivers to request a Bus Reset on
     Non-Fatal Errors (in addition to the reset on Fatal Errors that we
     already do) (Lukas Wunner)

   - If error recovery fails, emit FAILED_RECOVERY uevents for the
     devices, not for the bridge leading to them.

     This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)

   - Align AER with EEH by calling err_handler.error_detected()
     callbacks to notify drivers if error recovery fails (Lukas Wunner)

   - Align AER with EEH by restoring device error_state to
     pci_channel_io_normal before the err_handler.slot_reset() callback.

     This is earlier than before the err_handler.resume() callback
     (Lukas Wunner)

   - Emit a BEGIN_RECOVERY uevent when driver's
     err_handler.error_detected() requests a reset, as well as when it
     says recovery is complete or can be done without a reset (Niklas
     Schnelle)

   - Align s390 with AER and EEH by emitting uevents during error
     recovery (Niklas Schnelle)

   - Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
     SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
     result of err_handler.error_detected() (Niklas Schnelle)

   - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
     error information identifies a device without an AER Capability
     (Breno Leitao)

   - Update error decoding and TLP Log printing for new errors in
     current PCIe base spec (Lukas Wunner)

   - Update error recovery documentation to match the current code
     and use consistent nomenclature (Lukas Wunner)

  ASPM:

   - Enable all ClockPM and ASPM states for devicetree platforms, since
     there's typically no firmware that enables ASPM

     This is a risky change that may uncover hardware or configuration
     defects at boot-time rather than when users enable ASPM via sysfs
     later. Booting with "pcie_aspm=off" prevents this enabling
     (Manivannan Sadhasivam)

   - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)

  Power management:

   - If a device has already been disconnected, e.g., by a hotplug
     removal, don't bother trying to resume it to D0 when detaching the
     driver.

     This avoids annoying "Unable to change power state from D3cold to
     D0" messages (Mario Limonciello)

   - Ensure devices are powered up before config reads for
     'max_link_width', 'current_link_speed', 'current_link_width',
     'secondary_bus_number', and 'subordinate_bus_number' sysfs files.

     This prevents using invalid data (~0) in drivers or lspci and,
     depending on how the PCIe controller reports errors, may avoid
     error interrupts or crashes (Brian Norris)

  Virtualization:

   - Add rescan/remove locking when enabling/disabling SR-IOV, which
     avoids list corruption on s390, where disabling SR-IOV also
     generates hotplug events (Niklas Schnelle)

  Peer-to-peer DMA:

   - Free struct p2p_pgmap, not a member within it, in the
     pci_p2pdma_add_resource() error path (Sungho Kim)

  Endpoint framework:

   - Document sysfs interface for BAR assignment of vNTB endpoint
     functions (Jerome Brunet)

   - Fix array underflow in endpoint BAR test case (Dan Carpenter)

   - Skip endpoint IRQ test if the IRQ is out of range to avoid false
     errors (Christian Bruel)

   - Fix endpoint test case for controllers with fixed-size BARs smaller
     than requested by the test (Marek Vasut)

   - Restore inbound translation when disabling doorbell so the endpoint
     doorbell test case can be run more than once (Niklas Cassel)

   - Avoid a NULL pointer dereference when releasing DMA channels in
     endpoint DMA test case (Shin'ichiro Kawasaki)

   - Convert tegra194 interrupt number to MSI vector to fix endpoint
     Kselftest MSI_TEST test case (Niklas Cassel)

   - Reset tegra194 BARs when running in endpoint mode so the BAR tests
     don't overwrite the ATU settings in BAR4 (Niklas Cassel)

   - Handle errors in tegra194 BPMP transactions so we don't mistakenly
     skip future PERST# assertion (Vidya Sagar)

  AMD MDB PCIe controller driver:

   - Update DT binding example to separate PERST# to a Root Port stanza
     to make multiple Root Ports possible in the future (Sai Krishna
     Musham)

   - Add driver support for PERST# being described in a Root Port
     stanza, falling back to the host bridge if not found there (Sai
     Krishna Musham)

  Freescale i.MX6 PCIe controller driver:

   - Enable the 3.3V Vaux supply if available so devices can request
     wakeup with either Beacon or WAKE# (Richard Zhu)

  MediaTek PCIe Gen3 controller driver:

   - Add optional sys clock ready time setting to avoid sys_clk_rdy
     signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)

   - Add DT binding and driver support for MT6991 and MT8196
     (AngeloGioacchino Del Regno)

  NVIDIA Tegra PCIe controller driver:

   - When asserting PERST#, disable the controller instead of mistakenly
     disabling the PLL twice (Nagarjuna Kristam)

   - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  Qualcomm PCIe controller driver:

   - Select PCI Power Control Slot driver so slot voltage rails can be
     turned on/off if described in Root Port devicetree node (Qiang Yu)

   - Parse only PCI bridge child nodes in devicetree, skipping unrelated
     nodes such as OPP (Operating Performance Points), which caused
     probe failures (Krishna Chaitanya Chundru)

   - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)

   - Consolidate Root Port 'phy' and 'reset' properties in struct
     qcom_pcie_port, regardless of whether we got them from the Root
     Port node or the host bridge node (Manivannan Sadhasivam)

   - Fetch and map the ELBI register space in the DWC core rather than
     in each driver individually (Krishna Chaitanya Chundru)

   - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
     Shift Feature' and use this in the qcom driver (Krishna Chaitanya
     Chundru)

   - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
     Chundru)

   - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
     Glymur, which is compatible with X1E80100 but doesn't have the
     cnoc_sf_axi clock (Qiang Yu)

  Renesas R-Car PCIe controller driver:

   - Fix a typo that prevented correct PHY initialization (Marek Vasut)

   - Add a missing 1ms delay after PWR reset assertion as required by
     the V4H manual (Marek Vasut)

   - Assure reset has completed before DBI access to avoid SError (Marek
     Vasut)

   - Fix inverted PHY initialization check, which sometimes led to
     timeouts and failure to start the controller (Marek Vasut)

   - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
     regression when converting to msi_create_parent_irq_domain()
     (Claudiu Beznea)

   - Drop the spinlock protecting the PMSR register - it's no longer
     required since pci_lock already serializes accesses (Marek Vasut)

   - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  SOPHGO PCIe controller driver:

   - Check for existence of struct cdns_pcie.ops before using it to
     allow Cadence drivers that don't need to supply ops (Chen Wang)

   - Add DT binding and driver for the SOPHGO SG2042 PCIe controller
     (Chen Wang)

  STMicroelectronics STM32MP25 PCIe controller driver:

   - Update pinctrl documentation of initial states and use in runtime
     suspend/resume (Christian Bruel)

   - Add pinctrl_pm_select_init_state() for use by stm32 driver, which
     needs it during resume (Christian Bruel)

   - Add devicetree bindings and drivers for the STMicroelectronics
     STM32MP25 in host and endpoint modes (Christian Bruel)

  Synopsys DesignWare PCIe controller driver:

   - Add support for x16 in devicetree 'num-lanes' property (Konrad
     Dybcio)

   - Verify that if DT specifies a single IRQ for all eDMA channels, it
     is named 'dma' (Niklas Cassel)

  TI J721E PCIe driver:

   - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
     Vadapalli)

   - Power controller off before configuring the glue layer so the
     controller latches the correct values on power-on (Siddharth
     Vadapalli)

  TI Keystone PCIe controller driver:

   - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
     exits with error (Siddharth Vadapalli)

   - Add Peripheral Virtualization Unit (PVU), which restricts DMA from
     PCIe devices to specific regions of host memory, to the ti,am65
     binding (Jan Kiszka)

  Xilinx NWL PCIe controller driver:

   - Clear bootloader E_ECAM_CONTROL before merging in the new driver
     value to avoid writing invalid values (Jani Nurminen)"

* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
  PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
  MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
  PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
  dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
  PCI: stm32: Add PCIe host support for STM32MP25
  PCI: xilinx-nwl: Fix ECAM programming
  PCI: j721e: Fix incorrect error message in probe()
  PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
  dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
  PCI: dwc: Support 16-lane operation
  PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
  PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
  PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
  PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
  PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
  PCI: rcar-gen4: Fix inverted break condition in PHY initialization
  PCI: rcar-gen4: Assure reset occurs before DBI access
  PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
  PCI: Set up bridge resources earlier
  PCI: rcar-host: Drop PMSR spinlock
  ...

Pull SoC driver updates from Arnd Bergmann:
 "Lots of platform specific updates for Qualcomm SoCs, including a new
  TEE subsystem driver for the Qualcomm QTEE firmware interface.

  Added support for the Apple A11 SoC in drivers that are shared with
  the M1/M2 series, among more updates for those.

  Smaller platform specific driver updates for Renesas, ASpeed,
  Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
  SoCs.

  Driver updates in the cache controller, memory controller and reset
  controller subsystems.

  SCMI firmware updates to add more features and improve robustness.
  This includes support for having multiple SCMI providers in a single
  system.

  TEE subsystem support for protected DMA-bufs, allowing hardware to
  access memory areas that managed by the kernel but remain inaccessible
  from the CPU in EL1/EL0"

* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
  soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
  soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
  soc: fsl: qe: Change GPIO driver to a proper platform driver
  tee: fix register_shm_helper()
  pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
  dt-bindings: spmi: Add Apple A11 and T2 compatible
  serial: qcom-geni: Load UART qup Firmware from linux side
  spi: geni-qcom: Load spi qup Firmware from linux side
  i2c: qcom-geni: Load i2c qup Firmware from linux side
  soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
  soc: qcom: geni-se: Cleanup register defines and update copyright
  dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
  Documentation: tee: Add Qualcomm TEE driver
  tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
  tee: qcom: add primordial object
  tee: add Qualcomm TEE driver
  tee: increase TEE_MAX_ARG_SIZE to 4096
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
  tee: add close_context to TEE driver operation
  ...

Pull pin control updates from Linus Walleij:
 "We have GPIO awareness in the pin control core and an interesting
  AAEON driver.

  Core changes:

   - Allow pins to be identified/marked as GPIO mode with a special
     callback.

     The pin controller core is now "aware" if a pin is in GPIO mode if
     the callback is implemented in the driver, and can thus be marked
     as "strict", i.e. disallowing simultaneous use of a line as GPIO
     and another function such as I2C.

     This is enabled in the Qualcomm TLMM driver and also implemeted
     from day 1 in the new Broadcom STB driver

   - Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
     to better describe what the config is doing, as well as making it
     more intuitive what shall be returned when reading this property

  New drivers:

   - Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver

   - Qualcomm Glymur family pin controller driver

   - Broadcom STB family pin controller driver

   - Tegra186 pin controller driver

   - AAEON UP pin controller support.

     This is some special pin controller that works as an external
     advanced line MUX and amplifier for signals from an Intel SoC. A
     cooperative effort with the GPIO maintainer was needed to reach a
     solution where we reuse code from the GPIO aggregator/forwarder
     driver

   - Renesas RZ/T2H and RZ/N2H pin controller support

   - Axis ARTPEC-8 subdriver for the Samsung pin controller driver

  Improvements:

   - Output enable (OEN) support in the Renesas RZG2L driver

   - Properly support bias pull up/down in the pinctrl-single driver

   - Move over all GPIO portions using generic MMIO GPIO to the new
     generic GPIO chip management which has a nice and separate API

   - Proper DT bindings for some older Broadcom SoCs

   - External GPIO (EGPIO) support in the Qualcomm SM8250

  Deleted code:

   - Dropped the now unused Samsung S3C24xx drivers"

* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: use more common syntax for compound literals
  pinctrl: Simplify printks with pOF format
  pinctrl: qcom: Add SDM660 LPASS LPI TLMM
  dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
  pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
  pinctrl: qcom: Add glymur pinctrl driver
  dt-bindings: pinctrl: qcom: Add Glymur pinctrl
  pinctrl: qcom: sm8250: Add egpio support
  pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
  pinctrl: keembay: fix double free in keembay_build_functions()
  pinctrl: spacemit: fix typo in PRI_TDI pin name
  pinctrl: eswin: Fix regulator error check and Kconfig dependency
  pinctrl: bcm: Add STB family pin controller driver
  dt-bindings: pinctrl: Add support for Broadcom STB pin controller
  pinctrl: qcom: make the pinmuxing strict
  pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
  pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
  pinctrl: allow to mark pin functions as requestable GPIOs
  pinctrl: qcom: use generic pin function helpers
  pinctrl: make struct pinfunction a pointer in struct function_desc
  ...