linux-stable.git/drivers/pinctrl, branch v5.4.23 Linux kernel stable tree pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs 2020-02-24T07:36:41+00:00 Geert Uytterhoeven geert+renesas@glider.be 2019-12-18T19:48:10+00:00 e39aac0e65f1374da1b9354b0922431e42c9403c [ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ] pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the first two CAN outputs. A closer look reveals other issues: - Some functionality is available on alternative pins, but the PINMUX_DATA() entries is using the wrong marks, - Several configurations are missing. Fix this by: - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK, resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the corresponding enum IDs, - Adding all missing enum IDs and marks, - Use the right (*_PJ2x) variants for alternative pins, - Adding all missing configurations to pinmux_data[], - Adding all missing function GPIO definitions to pinmux_func_gpios[]. See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00: [1] Table 1.4 List of Pins [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel (32 Mailboxes × 1 Channel), [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as One Channel (96 Mailboxes × 1 Channel), [4] Table 48.3 Multiplexed Pins (Port B), [5] Table 48.4 Multiplexed Pins (Port C), [6] Table 48.10 Multiplexed Pins (Port J), [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins 2020-02-24T07:36:27+00:00 Hans de Goede hdegoede@redhat.com 2019-12-27T23:04:47+00:00 04a5bebd778975f72adefc211460e878c88bec51 [ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ] Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource. This works fine, until the goodix driver gets rmmod-ed and then insmod-ed again. In this case byt_gpio_disable_free() calls byt_gpio_clear_triggering() which clears the IRQ flags and after that the (direct) IRQ no longer triggers. This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag to byt_gpio_clear_triggering(). Note that byt_gpio_clear_triggering() only gets called from byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded from the irq_valid mask by byt_init_irq_valid_mask(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ]

Suspending Goodix touchscreens requires changing the interrupt pin to
output before sending them a power-down command. Followed by wiggling
the interrupt pin to wake the device up, after which it is put back
in input mode.

On Bay Trail devices with a Goodix touchscreen direct-irq mode is used
in combination with listing the pin as a normal GpioIo resource.

This works fine, until the goodix driver gets rmmod-ed and then insmod-ed
again. In this case byt_gpio_disable_free() calls
byt_gpio_clear_triggering() which clears the IRQ flags and after that the
(direct) IRQ no longer triggers.

This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag
to byt_gpio_clear_triggering().

Note that byt_gpio_clear_triggering() only gets called from
byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded
from the irq_valid mask by byt_init_irq_valid_mask().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs 2020-02-24T07:36:24+00:00 Geert Uytterhoeven geert+renesas@glider.be 2019-12-18T19:48:09+00:00 f46afae807aa31799b8a52853fc697c401e1d1e6 [ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ] pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs. Fix this by: - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal, - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs, - Adding the missing function GPIO definition for "CTX0&CTX1" to pinmux_func_gpios[], - Moving all CAN enums next to each other. See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00: [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version), [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version, [3] Table 1.4 List of Pins, [4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel), [5] Table 32.10 Multiplexed Pins (Port J), [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0). Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
two CAN outputs.

Fix this by:
  - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010
    configures the combined "CTX0&CTX1" output signal,
  - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures
    the shared "CRX0/CRX1" input signal, which is fed to both CAN
    inputs,
  - Adding the missing function GPIO definition for "CTX0&CTX1" to
    pinmux_func_gpios[],
  - Moving all CAN enums next to each other.

See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00:
  [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte
      Version),
  [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte
      Version,
  [3] Table 1.4 List of Pins,
  [4] Figure 20.29 Connection Example when Using This Module as 1-Channel
      Module (64 Mailboxes x 1 Channel),
  [5] Table 32.10 Multiplexed Pins (Port J),
  [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).

Note that the last 2 disagree about PJ2MD[2:0], which is probably the
root cause of this bug.  But considering [4], "CTx0&CTx1" in [5] must
be correct, and "CRx0&CRx1" in [6] must be wrong.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B 2020-02-14T21:34:19+00:00 Geert Uytterhoeven geert+renesas@glider.be 2019-12-18T19:48:07+00:00 4eb12ef7491d76506549b61704c6a62cc545a307 commit 805f635703b2562b5ddd822c62fc9124087e5dd5 upstream. The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 805f635703b2562b5ddd822c62fc9124087e5dd5 upstream.

The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means
one set of users must be wrong.  Replace them by the correct enum IDs.

Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control 2020-02-14T21:34:19+00:00 Geert Uytterhoeven geert+renesas@glider.be 2019-11-13T10:16:53+00:00 7b07d15aa5b46c82bffa18357c3c0eef2adac569 commit a34cd9dfd03fa9ec380405969f1d638bc63b8d63 upstream. R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019 changed the configuration bits for drive and bias control for the DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3. Update the driver to reflect this. After this, the handling of drive and bias control for the various DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W, M3-W+, and M3-N SoCs. Fixes: 86c045c2e4201e94 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191113101653.28428-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a34cd9dfd03fa9ec380405969f1d638bc63b8d63 upstream.

R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019
changed the configuration bits for drive and bias control for the
DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3.
Update the driver to reflect this.

After this, the handling of drive and bias control for the various
DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W,
M3-W+, and M3-N SoCs.

Fixes: 86c045c2e4201e94 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191113101653.28428-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: sunrisepoint: Add missing Interrupt Status register offset 2020-01-29T15:45:27+00:00 Boyan Ding boyan.j.ding@gmail.com 2020-01-01T20:41:20+00:00 d4616a9f8ee9d8a05fa9f36901d91ed6a0a49e1e commit 9608ea6c6613ced75b2c41703d99f44e6f8849f1 upstream. Commit 179e5a6114cc ("pinctrl: intel: Remove default Interrupt Status offset") removes default interrupt status offset of GPIO controllers, with previous commits explicitly providing the previously default offsets. However, the is_offset value in SPTH_COMMUNITY is missing, preventing related irq from being properly detected and handled. Fixes: f702e0b93cdb ("pinctrl: sunrisepoint: Provide Interrupt Status register offset") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205745 Cc: stable@vger.kernel.org Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9608ea6c6613ced75b2c41703d99f44e6f8849f1 upstream.

Commit 179e5a6114cc ("pinctrl: intel: Remove default Interrupt Status
offset") removes default interrupt status offset of GPIO controllers,
with previous commits explicitly providing the previously default
offsets. However, the is_offset value in SPTH_COMMUNITY is missing,
preventing related irq from being properly detected and handled.

Fixes: f702e0b93cdb ("pinctrl: sunrisepoint: Provide Interrupt Status register offset")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205745
Cc: stable@vger.kernel.org
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: lewisburg: Update pin list according to v1.1v6 2020-01-17T18:48:50+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2019-11-20T13:37:39+00:00 0830d7d6705c7cb63295f2c76e85ecd1a25068a1 commit e66ff71fd0dba36a53f91f39e4da6c7b84764f2e upstream. Version 1.1v6 of pin list has some changes in pin names for Intel Lewisburg. Update the driver accordingly. Note, it reveals the bug in the driver that misses two pins in GPP_L and has rather two extra ones. That's why the ordering of some groups is changed. Fixes: e480b745386e ("pinctrl: intel: Add Intel Lewisburg GPIO support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20191120133739.54332-1-andriy.shevchenko@linux.intel.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e66ff71fd0dba36a53f91f39e4da6c7b84764f2e upstream.

Version 1.1v6 of pin list has some changes in pin names for Intel Lewisburg.

Update the driver accordingly.

Note, it reveals the bug in the driver that misses two pins in GPP_L and
has rather two extra ones. That's why the ordering of some groups is changed.

Fixes: e480b745386e ("pinctrl: intel: Add Intel Lewisburg GPIO support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120133739.54332-1-andriy.shevchenko@linux.intel.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts 2020-01-17T18:48:50+00:00 Geert Uytterhoeven geert+renesas@glider.be 2019-10-16T14:26:01+00:00 bb0b1fc11c694a2f4bba5899498020028af2c740 commit ad7fe1a1a35994a201497443b5140bf54b074cca upstream. As platform_get_irq() now prints an error when the interrupt does not exist, counting interrupts by looping until failure causes the printing of scary messages like: sh-pfc e6060000.pin-controller: IRQ index 0 not found Fix this by using the platform_irq_count() helper instead. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191016142601.28255-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ad7fe1a1a35994a201497443b5140bf54b074cca upstream.

As platform_get_irq() now prints an error when the interrupt does not
exist, counting interrupts by looping until failure causes the printing
of scary messages like:

    sh-pfc e6060000.pin-controller: IRQ index 0 not found

Fix this by using the platform_irq_count() helper instead.

Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191016142601.28255-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: sh-pfc: Fix PINMUX_IPSR_PHYS() to set GPSR 2020-01-17T18:48:50+00:00 Keiya Nobuta nobuta.keiya@fujitsu.com 2019-10-08T06:01:12+00:00 5d7da82a5b10cd296b88b7f1afb3e25938e9bf1f commit d30710b8cce3a581c170d69002e311cc18ed47d3 upstream. This patch allows PINMUX_IPSR_PHYS() to set bits in GPSR. When assigning function to pin, GPSR should be set to peripheral function. For example when using SCL3, GPSR2 bit7 (PWM1_A pin) should be set to peripheral function. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Link: https://lore.kernel.org/r/20191008060112.29819-1-nobuta.keiya@fujitsu.com Fixes: 50d1ba1764b3e00a ("pinctrl: sh-pfc: Add physical pin multiplexing helper macros") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d30710b8cce3a581c170d69002e311cc18ed47d3 upstream.

This patch allows PINMUX_IPSR_PHYS() to set bits in GPSR.
When assigning function to pin, GPSR should be set to peripheral
function.
For example when using SCL3, GPSR2 bit7 (PWM1_A pin) should be set to
peripheral function.

Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com>
Link: https://lore.kernel.org/r/20191008060112.29819-1-nobuta.keiya@fujitsu.com
Fixes: 50d1ba1764b3e00a ("pinctrl: sh-pfc: Add physical pin multiplexing helper macros")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctl: ti: iodelay: fix error checking on pinctrl_count_index_with_args call 2020-01-17T18:48:50+00:00 Colin Ian King colin.king@canonical.com 2019-09-20T12:20:30+00:00 7d37e27a8a0bede73697fddaccea69c060a4e299 commit 5ff8aca906f3a7a7db79fad92f2a4401107ef50d upstream. The call to pinctrl_count_index_with_args checks for a -EINVAL return however this function calls pinctrl_get_list_and_count and this can return -ENOENT. Rather than check for a specific error, fix this by checking for any error return to catch the -ENOENT case. Addresses-Coverity: ("Improper use of negative") Fixes: 003910ebc83b ("pinctrl: Introduce TI IOdelay configuration driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190920122030.14340-1-colin.king@canonical.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5ff8aca906f3a7a7db79fad92f2a4401107ef50d upstream.

The call to pinctrl_count_index_with_args checks for a -EINVAL return
however this function calls pinctrl_get_list_and_count and this can
return -ENOENT. Rather than check for a specific error, fix this by
checking for any error return to catch the -ENOENT case.

Addresses-Coverity: ("Improper use of negative")
Fixes: 003910ebc83b ("pinctrl: Introduce TI IOdelay configuration driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190920122030.14340-1-colin.king@canonical.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>