linux-stable.git/drivers/pinctrl, branch v4.5.2 Linux kernel stable tree pinctrl: freescale: imx: fix bogus check of of_iomap() return value 2016-04-20T06:45:20+00:00 Vladimir Zapolskiy vz@mleia.com 2016-03-09T00:45:36+00:00 a83977c7662d4410f6da7ffd1ff0d7725d7d2759 commit 9a4f424531dabd877259ae0071b8bcc4dede9eb5 upstream. On error path of_iomap() returns NULL, hence IS_ERR() check is invalid and may cause a NULL pointer dereference, the change fixes this problem. While we are here invert a device node check to simplify the code. Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9a4f424531dabd877259ae0071b8bcc4dede9eb5 upstream.

On error path of_iomap() returns NULL, hence IS_ERR() check is invalid
and may cause a NULL pointer dereference, the change fixes this
problem.

While we are here invert a device node check to simplify the code.

Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: nomadik: fix pull debug print inversion 2016-04-20T06:45:20+00:00 Linus Walleij linus.walleij@linaro.org 2016-03-24T12:15:45+00:00 6c6acf4f5107bfea3777dac54e743dc446fe8b88 commit 6ee334559324a55725e22463de633b99ad99fcad upstream. Pull up was reported as pull down and vice versa. Fix this. Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints" Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6ee334559324a55725e22463de633b99ad99fcad upstream.

Pull up was reported as pull down and vice versa. Fix this.

Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints"
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: sunxi: Fix A33 external interrupts not working 2016-04-20T06:45:19+00:00 Hans de Goede hdegoede@redhat.com 2016-03-12T18:44:57+00:00 e58d48e2822b4238d42edb993add4881cdd9d9d5 commit 5e7515ba78fff2f5407eaa2f97c1d5c07801ac3d upstream. pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks, where as the closely related a23 has 3 banks. This matches with the datasheet for the A33 where only interrupt banks B and G are specified where as the A23 has banks A, B and G. However the A33 being the A23 derative it is means that the interrupt configure/status io-addresses for the 2 banks it has are not changed from the A23, iow they have the same address as if bank A was still present. Where as the sunxi pinctrl currently tries to use the A23 bank A addresses for bank B, since the pinctrl code does not know about the removed bank A. Add a irq_bank_base parameter and use this where appropriate to take the missing bank A into account. This fixes external interrupts not working on the A33 (tested with an i2c touchscreen controller which uses an external interrupt). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5e7515ba78fff2f5407eaa2f97c1d5c07801ac3d upstream.

pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks,
where as the closely related a23 has 3 banks. This matches with the
datasheet for the A33 where only interrupt banks B and G are specified
where as the A23 has banks A, B and G.

However the A33 being the A23 derative it is means that the interrupt
configure/status io-addresses for the 2 banks it has are not changed
from the A23, iow they have the same address as if bank A was still
present. Where as the sunxi pinctrl currently tries to use the A23 bank
A addresses for bank B, since the pinctrl code does not know about the
removed bank A.

Add a irq_bank_base parameter and use this where appropriate to take
the missing bank A into account.

This fixes external interrupts not working on the A33 (tested with
an i2c touchscreen controller which uses an external interrupt).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: sh-pfc: only use dummy states for non-DT platforms 2016-04-20T06:45:19+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2016-03-07T18:40:57+00:00 25198da237ff51d0189f8fa07462700ad2eb2c67 commit 0129801be4b87226bf502f18f5a9eabd356d1058 upstream. If pinctrl_provide_dummies() is used unconditionally, then the dummy state will be used even on DT platforms when the "init" state was intentionally left out. Instead of "default", the dummy "init" state will then be used during probe. Thus, when probing an I2C controller on cold boot, communication triggered by bus notifiers broke because the pins were not initialized. Do it like OMAP2: use the dummy state only for non-DT platforms. Fixes: ef0eebc05130 ("drivers/pinctrl: Add the concept of an "init" state") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0129801be4b87226bf502f18f5a9eabd356d1058 upstream.

If pinctrl_provide_dummies() is used unconditionally, then the dummy
state will be used even on DT platforms when the "init" state was
intentionally left out. Instead of "default", the dummy "init" state
will then be used during probe. Thus, when probing an I2C controller on
cold boot, communication triggered by bus notifiers broke because the
pins were not initialized.

Do it like OMAP2: use the dummy state only for non-DT platforms.

Fixes: ef0eebc05130 ("drivers/pinctrl: Add the concept of an "init" state")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: pistachio: fix mfio84-89 function description and pinmux. 2016-04-20T06:45:19+00:00 Govindraj Raja Govindraj.Raja@imgtec.com 2016-03-04T15:28:22+00:00 84f588689e208793627ada9bdf9419dbfcd9a63a commit e9adb336d0bf391be23e820975ca5cd12c31d781 upstream. mfio 84 to 89 are described wrongly, fix it to describe the right pin and add them to right pin-mux group. The correct order is: pll1_lock => mips_pll -- MFIO_83 pll2_lock => audio_pll -- MFIO_84 pll3_lock => rpu_v_pll -- MFIO_85 pll4_lock => rpu_l_pll -- MFIO_86 pll5_lock => sys_pll -- MFIO_87 pll6_lock => wifi_pll -- MFIO_88 pll7_lock => bt_pll -- MFIO_89 Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: James Hartley <James.Hartley@imgtec.com> Fixes: cefc03e5995e("pinctrl: Add Pistachio SoC pin control driver") Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e9adb336d0bf391be23e820975ca5cd12c31d781 upstream.

mfio 84 to 89 are described wrongly, fix it to describe
the right pin and add them to right pin-mux group.

The correct order is:
	pll1_lock => mips_pll	-- MFIO_83
	pll2_lock => audio_pll	-- MFIO_84
	pll3_lock => rpu_v_pll	-- MFIO_85
	pll4_lock => rpu_l_pll	-- MFIO_86
	pll5_lock => sys_pll	-- MFIO_87
	pll6_lock => wifi_pll	-- MFIO_88
	pll7_lock => bt_pll	-- MFIO_89

Cc: linux-gpio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: James Hartley <James.Hartley@imgtec.com>
Fixes: cefc03e5995e("pinctrl: Add Pistachio SoC pin control driver")
Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
Acked-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing 2016-04-12T14:33:15+00:00 Phil Elwell phil@raspberrypi.org 2016-03-01T01:30:08+00:00 9a6d6a47b4e1b661d00f3046d2e2c284fd438118 commit 2c7e3306d23864d49f686f22e56e180ff0fffb7f upstream. The DT bindings for pinctrl-bcm2835 allow both the function and pull to contain either one entry or one per pin. However, an error in the DT parsing can cause failures if the number of pulls differs from the number of functions. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2c7e3306d23864d49f686f22e56e180ff0fffb7f upstream.

The DT bindings for pinctrl-bcm2835 allow both the function and pull
to contain either one entry or one per pin. However, an error in the
DT parsing can cause failures if the number of pulls differs from the
number of functions.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: samsung: fix SMP race condition 2016-02-15T19:45:50+00:00 Youngmin Nam ym0914@gmail.com 2016-02-08T15:49:28+00:00 d9ff0eb9ca4b00ce2fbf9ede1e99681f05c0bc91 Previously, samsung_gpio_drection_in/output function were not covered with a spinlock. For example, samsung_gpio_direction_output function consists of two functions. 1. samsung_gpio_set 2. samsung_gpio_set_direction When 2 CPUs try to control the same gpio pin heavily, (situation like i2c control with gpio emulation) This situation can cause below problem. CPU 0 | CPU1 | samsung_gpio_direction_output | samsung_gpio_set(pin A as 1) | samsung_gpio_direction_output | samsung_gpio_set(pin A as 0) samsung_gpio_set_direction | | samsung_gpio_set_direction The initial value of pin A will be set as 0 while we wanted to set pin A as 1. This patch modifies samsung_gpio_direction_in/output function to be done in one spinlock to fix race condition. Additionally, the new samsung_gpio_set_value was added to implement gpio set callback(samsung_gpio_set) with spinlock using this function. Cc: stable@vger.kernel.org Signed-off-by: Youngmin Nam <ym0914@gmail.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Previously, samsung_gpio_drection_in/output function were not covered
with a spinlock.

For example, samsung_gpio_direction_output function consists of
two functions.
1. samsung_gpio_set
2. samsung_gpio_set_direction

When 2 CPUs try to control the same gpio pin heavily,
(situation like i2c control with gpio emulation)
This situation can cause below problem.

CPU 0                                   | CPU1
                                        |
samsung_gpio_direction_output           |
   samsung_gpio_set(pin A as 1)         | samsung_gpio_direction_output
                                        |    samsung_gpio_set(pin A as 0)
   samsung_gpio_set_direction           |
                                        |    samsung_gpio_set_direction

The initial value of pin A will be set as 0 while we wanted to set pin A as 1.

This patch modifies samsung_gpio_direction_in/output function
to be done in one spinlock to fix race condition.

Additionally, the new samsung_gpio_set_value was added to implement
gpio set callback(samsung_gpio_set) with spinlock using this function.

Cc: stable@vger.kernel.org
Signed-off-by: Youngmin Nam <ym0914@gmail.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mvebu: fix num_settings in mpp group assignment 2016-02-13T22:51:45+00:00 Sebastian Hesselbarth sebastian.hesselbarth@gmail.com 2016-02-01T22:48:23+00:00 7864d92621b6897595fa698b27240828592ebd71 When assigning mpp settings from static mpp modes to mpp groups, we do not want any groups that have no supported setting for a specific Kirkwood variant. However, when there is at least a single supported setting, we need to assign the number of all settings in this mode to grp->num_settings as we are reusing the static modes table. Fixes: 0581b16b1840 ("pinctrl: mvebu: complain about missing group after checking variant") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
When assigning mpp settings from static mpp modes to mpp groups,
we do not want any groups that have no supported setting for a
specific Kirkwood variant. However, when there is at least a
single supported setting, we need to assign the number of all
settings in this mode to grp->num_settings as we are reusing
the static modes table.

Fixes: 0581b16b1840 ("pinctrl: mvebu: complain about missing group after checking variant")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sunxi: H3 requires irq_read_needs_mux 2016-02-11T13:29:13+00:00 Krzysztof Adamski k@japko.eu 2016-02-03T07:57:14+00:00 111f2b87326199a736c3469265763a6be6e5528f It seems that on H3, just like on A10, when GPIOs are configured as external interrupt data registers does not contain their value. When value is read, GPIO function must be temporary switched to input for reads. Signed-off-by: Krzysztof Adamski <k@japko.eu> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
It seems that on H3, just like on A10, when GPIOs are configured as
external interrupt data registers does not contain their value.  When
value is read, GPIO function must be temporary switched to input for
reads.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mediatek: fix direction control issue 2016-02-05T13:55:20+00:00 Biao Huang biao.huang@mediatek.com 2016-02-03T01:24:45+00:00 eceb3e61c74356590f37cec89708770b333162c4 Since input-enable/disable and input-schmitt-enable/disable are workable when gpio direction is input, so add direction setting when do input-enable/disable and input-schmitt-enable/disable properties. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Since input-enable/disable and input-schmitt-enable/disable are
workable when gpio direction is input, so add direction setting
when do input-enable/disable and input-schmitt-enable/disable
properties.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>