linux-stable.git/drivers/pinctrl, branch v4.4.211

pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B

2020-01-04T12:34:14+00:00

[ Upstream commit 884caadad128efad8e00c1cdc3177bc8912ee8ec ]

The definitions for bit field [19:18] of the Peripheral Function Select
Register 3 were accidentally copied from bit field [20], leading to
duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and
ET0_ETXD4 functions.

Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4
enum values, and correcting the functions.

Reported-by: Ben Dooks 
Signed-off-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin

pinctrl: samsung: Fix device node refcount leaks in S3C64xx wakeup controller init

2019-12-21T09:35:34+00:00

[ Upstream commit 7f028caadf6c37580d0f59c6c094ed09afc04062 ]

In s3c64xx_eint_eint0_init() the for_each_child_of_node() loop is used
with a break to find a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: 
Fixes: 61dd72613177 ("pinctrl: Add pinctrl-s3c64xx driver")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Sasha Levin

pinctrl: samsung: Fix device node refcount leaks in init code

2019-12-21T09:35:28+00:00

commit a322b3377f4bac32aa25fb1acb9e7afbbbbd0137 upstream.

Several functions use for_each_child_of_node() loop with a break to find
a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: 
Fixes: 9a2c1c3b91aa ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Greg Kroah-Hartman

pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init

2019-12-21T09:35:28+00:00

commit 6fbbcb050802d6ea109f387e961b1dbcc3a80c96 upstream.

In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a
break to find a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: 
Fixes: af99a7507469 ("pinctrl: Add pinctrl-s3c24xx driver")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: ssbi-gpio: fix gpio-hog related boot issues

2019-12-21T09:34:30+00:00

[ Upstream commit 7ed07855773814337b9814f1c3e866df52ebce68 ]

When attempting to setup up a gpio hog, device probing will repeatedly
fail with -EPROBE_DEFERED errors. It is caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.

See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.

I did not test this change against any hardware supported by this
particular driver, however I was able to validate this same fix works
for pinctrl-spmi-gpio.c using a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10

2019-12-05T14:26:51+00:00

[ Upstream commit 054f2400f706327f96770219c3065b5131f8f154 ]

Some values in the Peripheral Function Select Register 10 descriptor are
shifted by one position, which may cause a peripheral function to be
programmed incorrectly.

Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
already the case for the HSCK0 pin in field IP10[5:3].

Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Simon Horman 
Signed-off-by: Sasha Levin

pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration

2019-12-05T14:26:50+00:00

[ Upstream commit 1b99d0c80bbe1810572c2cb77b90f67886adfa8d ]

The Port F Control Register 3 (PFCR3) contains only a single field.
However, counting from left to right, it is the fourth field, not the
first field.
Insert the missing dummy configuration values (3 fields of 16 values) to
fix this.

The descriptor for the Port F Control Register 0 (PFCR0) lacks the
description for the 4th field (PF0 Mode, PF0MD[2:0]).
Add the missing configuration values to fix this.

Fixes: a8d42fc4217b1ea1 ("sh-pfc: Add sh7264 pinmux support")
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Simon Horman 
Signed-off-by: Sasha Levin

pinctrl: zynq: Use define directive for PIN_CONFIG_IO_STANDARD

2019-11-28T17:26:09+00:00

[ Upstream commit cd8a145a066a1a3beb0ae615c7cb2ee4217418d7 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/pinctrl-zynq.c:985:18: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        {"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
        ~               ^~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-zynq.c:990:16: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        = { PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
            ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Signed-off-by: Nathan Chancellor 
Acked-by: Michal Simek 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: qcom: spmi-gpio: fix gpio-hog related boot issues

2019-11-28T17:26:09+00:00

[ Upstream commit 149a96047237574b756d872007c006acd0cc6687 ]

When attempting to setup up a gpio hog, device probing would repeatedly
fail with -EPROBE_DEFERED errors. It was caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.

See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.

Signed-off-by: Brian Masney 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: at91: don't use the same irqchip with multiple gpiochips

2019-11-25T14:53:58+00:00

[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ]

Sharing the same irqchip with multiple gpiochips is not a good
practice. For instance, when installing hooks, we change the state
of the irqchip. The initial state of the irqchip for the second
gpiochip to register is then disrupted.

Signed-off-by: Ludovic Desroches 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin