<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/pinctrl, branch v4.4.19</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>pinctrl: cherryview: prevent concurrent access to GPIO controllers</title>
<updated>2016-08-20T16:09:17+00:00</updated>
<author>
<name>Dan O'Donovan</name>
<email>dan@emutex.com</email>
</author>
<published>2016-06-10T12:23:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4c3b381fadc08342a2f4b1182c9f710983ab299c'/>
<id>4c3b381fadc08342a2f4b1182c9f710983ab299c</id>
<content type='text'>
commit 0bd50d719b004110e791800450ad204399100a86 upstream.

Due to a silicon issue on the Atom X5-Z8000 "Cherry Trail" processor
series, a common lock must be used to prevent concurrent accesses
across the 4 GPIO controllers managed by this driver.

See Intel Atom Z8000 Processor Series Specification Update
(Rev. 005), errata #CHT34, for further information.

Signed-off-by: Dan O'Donovan &lt;dan@emutex.com&gt;
Acked-by: Mika Westerberg &lt;mika.westerberg@linux.intel.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0bd50d719b004110e791800450ad204399100a86 upstream.

Due to a silicon issue on the Atom X5-Z8000 "Cherry Trail" processor
series, a common lock must be used to prevent concurrent accesses
across the 4 GPIO controllers managed by this driver.

See Intel Atom Z8000 Processor Series Specification Update
(Rev. 005), errata #CHT34, for further information.

Signed-off-by: Dan O'Donovan &lt;dan@emutex.com&gt;
Acked-by: Mika Westerberg &lt;mika.westerberg@linux.intel.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: imx: Do not treat a PIN without MUX register as an error</title>
<updated>2016-08-10T09:49:27+00:00</updated>
<author>
<name>Alexander Shiyan</name>
<email>shc_work@mail.ru</email>
</author>
<published>2016-06-01T19:21:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8f808f122f445fe1b391d1ee047dadf16437c749'/>
<id>8f808f122f445fe1b391d1ee047dadf16437c749</id>
<content type='text'>
commit ba562d5e54fd3136bfea0457add3675850247774 upstream.

Some PINs do not have a MUX register, it is not an error.
It is necessary to allow the continuation of the PINs configuration,
otherwise the whole PIN-group will be configured incorrectly.

Signed-off-by: Alexander Shiyan &lt;shc_work@mail.ru&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit ba562d5e54fd3136bfea0457add3675850247774 upstream.

Some PINs do not have a MUX register, it is not an error.
It is necessary to allow the continuation of the PINs configuration,
otherwise the whole PIN-group will be configured incorrectly.

Signed-off-by: Alexander Shiyan &lt;shc_work@mail.ru&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: single: Fix missing flush of posted write for a wakeirq</title>
<updated>2016-08-10T09:49:27+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2016-05-31T21:17:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6701df3c0a3672faef3e2cfbc4747254e603324a'/>
<id>6701df3c0a3672faef3e2cfbc4747254e603324a</id>
<content type='text'>
commit 0ac3c0a4025f41748a083bdd4970cb3ede802b15 upstream.

With many repeated suspend resume cycles, the pin specific wakeirq
may not always work on omaps. This is because the write to enable the
pin interrupt may not have reached the device over the interconnect
before suspend happens.

Let's fix the issue with a flush of posted write with a readback.

Reported-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0ac3c0a4025f41748a083bdd4970cb3ede802b15 upstream.

With many repeated suspend resume cycles, the pin specific wakeirq
may not always work on omaps. This is because the write to enable the
pin interrupt may not have reached the device over the interconnect
before suspend happens.

Let's fix the issue with a flush of posted write with a readback.

Reported-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: fix dual-edge code defect</title>
<updated>2016-06-24T17:18:20+00:00</updated>
<author>
<name>hongkun.cao</name>
<email>hongkun.cao@mediatek.com</email>
</author>
<published>2016-05-21T07:23:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b5ff1d6012726f539723c24712bb71976ee2bc77'/>
<id>b5ff1d6012726f539723c24712bb71976ee2bc77</id>
<content type='text'>
commit 5edf673d07fdcb6498be24914f3f38f8d8843199 upstream.

When a dual-edge irq is triggered, an incorrect irq will be reported on
condition that the external signal is not stable and this incorrect irq
has been registered.
Correct the register offset.

Signed-off-by: Hongkun Cao &lt;hongkun.cao@mediatek.com&gt;
Reviewed-by: Matthias Brugger &lt;matthias.bgg@gmail.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5edf673d07fdcb6498be24914f3f38f8d8843199 upstream.

When a dual-edge irq is triggered, an incorrect irq will be reported on
condition that the external signal is not stable and this incorrect irq
has been registered.
Correct the register offset.

Signed-off-by: Hongkun Cao &lt;hongkun.cao@mediatek.com&gt;
Reviewed-by: Matthias Brugger &lt;matthias.bgg@gmail.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range</title>
<updated>2016-06-08T01:14:35+00:00</updated>
<author>
<name>Andrew Jeffery</name>
<email>andrew@aj.id.au</email>
</author>
<published>2016-04-20T01:54:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f4b0dd357f31c3f794ebb171a4ed903c0eee4565'/>
<id>f4b0dd357f31c3f794ebb171a4ed903c0eee4565</id>
<content type='text'>
commit 71324fdc72ef0163e57631aa814a9a81e9e4770b upstream.

The range is registered into a linked list which can be referenced
throughout the lifetime of the driver. Ensure the range's memory is useful
for the same lifetime by adding it to the driver's private data structure.

The bug was introduced in the driver's initial commit, which was present in
v3.10.

Fixes: f0b9a7e521fa ("pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC")
Signed-off-by: Andrew Jeffery &lt;andrew@aj.id.au&gt;
Acked-by: Tomasz Figa &lt;tomasz.figa@gmail.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;k.kozlowski@samsung.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 71324fdc72ef0163e57631aa814a9a81e9e4770b upstream.

The range is registered into a linked list which can be referenced
throughout the lifetime of the driver. Ensure the range's memory is useful
for the same lifetime by adding it to the driver's private data structure.

The bug was introduced in the driver's initial commit, which was present in
v3.10.

Fixes: f0b9a7e521fa ("pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC")
Signed-off-by: Andrew Jeffery &lt;andrew@aj.id.au&gt;
Acked-by: Tomasz Figa &lt;tomasz.figa@gmail.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;k.kozlowski@samsung.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: at91-pio4: fix pull-up/down logic</title>
<updated>2016-05-19T00:06:47+00:00</updated>
<author>
<name>Ludovic Desroches</name>
<email>ludovic.desroches@atmel.com</email>
</author>
<published>2016-04-19T14:03:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1fba064f789e053be80f1ee38c70abde71f584e2'/>
<id>1fba064f789e053be80f1ee38c70abde71f584e2</id>
<content type='text'>
commit 5305a7b7e860bb40ab226bc7d58019416073948a upstream.

The default configuration of a pin is often with a value in the
pull-up/down field at chip reset. So, even if the internal logic of the
controller prevents writing a configuration with pull-up and pull-down at
the same time, we must ensure explicitly this condition before writing the
register.

This was leading to a pull-down condition not taken into account for
instance.

Signed-off-by: Ludovic Desroches &lt;ludovic.desroches@atmel.com&gt;
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Acked-by: Alexandre Belloni &lt;alexandre.belloni@free-electrons.com&gt;
Acked-by: Nicolas Ferre &lt;nicolas.ferre@atmel.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5305a7b7e860bb40ab226bc7d58019416073948a upstream.

The default configuration of a pin is often with a value in the
pull-up/down field at chip reset. So, even if the internal logic of the
controller prevents writing a configuration with pull-up and pull-down at
the same time, we must ensure explicitly this condition before writing the
register.

This was leading to a pull-down condition not taken into account for
instance.

Signed-off-by: Ludovic Desroches &lt;ludovic.desroches@atmel.com&gt;
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Acked-by: Alexandre Belloni &lt;alexandre.belloni@free-electrons.com&gt;
Acked-by: Nicolas Ferre &lt;nicolas.ferre@atmel.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs</title>
<updated>2016-05-04T21:48:45+00:00</updated>
<author>
<name>Keerthy</name>
<email>j-keerthy@ti.com</email>
</author>
<published>2016-04-14T04:59:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ee6a1e9eefed56308fcbd5619cb02b926b7ec630'/>
<id>ee6a1e9eefed56308fcbd5619cb02b926b7ec630</id>
<content type='text'>
commit 56b367c0cd67d4c3006738e7dc9dda9273fd2bfe upstream.

pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices
ranging from 1 to MAX. This leads to a corner case where we try to request
the pin number = MAX and fails.

bit_pos value is being calculted using ffs. pin_num_from_lsb uses
bit_pos value. pins array is populated with:

pin + pin_num_from_lsb.

The above is 1 more than usual bit indices as bit_pos uses ffs to compute
first set bit. Hence the last of the pins array is populated with the MAX
value and not MAX - 1 which causes error when we call pin_request.

mask_pos is rightly calculated as ((pcs-&gt;fmask) &lt;&lt; (bit_pos - 1))
Consequently val_pos and submask are correct.

Hence use __ffs which gives (ffs(x) - 1) as the first bit set.

fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Keerthy &lt;j-keerthy@ti.com&gt;
Acked-by: Tony Lindgren &lt;tony@atomide.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 56b367c0cd67d4c3006738e7dc9dda9273fd2bfe upstream.

pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices
ranging from 1 to MAX. This leads to a corner case where we try to request
the pin number = MAX and fails.

bit_pos value is being calculted using ffs. pin_num_from_lsb uses
bit_pos value. pins array is populated with:

pin + pin_num_from_lsb.

The above is 1 more than usual bit indices as bit_pos uses ffs to compute
first set bit. Hence the last of the pins array is populated with the MAX
value and not MAX - 1 which causes error when we call pin_request.

mask_pos is rightly calculated as ((pcs-&gt;fmask) &lt;&lt; (bit_pos - 1))
Consequently val_pos and submask are correct.

Hence use __ffs which gives (ffs(x) - 1) as the first bit set.

fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Keerthy &lt;j-keerthy@ti.com&gt;
Acked-by: Tony Lindgren &lt;tony@atomide.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce</title>
<updated>2016-05-04T21:48:45+00:00</updated>
<author>
<name>Yingjoe Chen</name>
<email>yingjoe.chen@mediatek.com</email>
</author>
<published>2016-04-02T06:57:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c7ce82609fda7214292998e3a38901d3944b6c16'/>
<id>c7ce82609fda7214292998e3a38901d3944b6c16</id>
<content type='text'>
commit 5fedbb923936174ab4d1d5cc92bca1cf6b2e0ca2 upstream.

The debounce time unit for gpio_chip.set_debounce is us but
mtk_gpio_set_debounce regard it as ms.
Fix this by correct debounce time array dbnc_arr so it can find correct
debounce setting. Debounce time for first debounce setting is 500us,
correct this as well.

While I'm at it, also change the debounce time array name to
"debounce_time" for readability.

Signed-off-by: Yingjoe Chen &lt;yingjoe.chen@mediatek.com&gt;
Reviewed-by: Daniel Kurtz &lt;djkurtz@chromium.org&gt;
Acked-by: Hongzhou Yang &lt;hongzhou.yang@mediatek.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5fedbb923936174ab4d1d5cc92bca1cf6b2e0ca2 upstream.

The debounce time unit for gpio_chip.set_debounce is us but
mtk_gpio_set_debounce regard it as ms.
Fix this by correct debounce time array dbnc_arr so it can find correct
debounce setting. Debounce time for first debounce setting is 500us,
correct this as well.

While I'm at it, also change the debounce time array name to
"debounce_time" for readability.

Signed-off-by: Yingjoe Chen &lt;yingjoe.chen@mediatek.com&gt;
Reviewed-by: Daniel Kurtz &lt;djkurtz@chromium.org&gt;
Acked-by: Hongzhou Yang &lt;hongzhou.yang@mediatek.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: freescale: imx: fix bogus check of of_iomap() return value</title>
<updated>2016-04-20T06:42:08+00:00</updated>
<author>
<name>Vladimir Zapolskiy</name>
<email>vz@mleia.com</email>
</author>
<published>2016-03-09T00:45:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2e638de516983b9575c845e878e1c41f5bcd2509'/>
<id>2e638de516983b9575c845e878e1c41f5bcd2509</id>
<content type='text'>
commit 9a4f424531dabd877259ae0071b8bcc4dede9eb5 upstream.

On error path of_iomap() returns NULL, hence IS_ERR() check is invalid
and may cause a NULL pointer dereference, the change fixes this
problem.

While we are here invert a device node check to simplify the code.

Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support")
Signed-off-by: Vladimir Zapolskiy &lt;vz@mleia.com&gt;
Acked-by: Shawn Guo &lt;shawnguo@kernel.org&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 9a4f424531dabd877259ae0071b8bcc4dede9eb5 upstream.

On error path of_iomap() returns NULL, hence IS_ERR() check is invalid
and may cause a NULL pointer dereference, the change fixes this
problem.

While we are here invert a device node check to simplify the code.

Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support")
Signed-off-by: Vladimir Zapolskiy &lt;vz@mleia.com&gt;
Acked-by: Shawn Guo &lt;shawnguo@kernel.org&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: nomadik: fix pull debug print inversion</title>
<updated>2016-04-20T06:42:08+00:00</updated>
<author>
<name>Linus Walleij</name>
<email>linus.walleij@linaro.org</email>
</author>
<published>2016-03-24T12:15:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e7c6abc464ac71ca734ea57a778872793d51ff29'/>
<id>e7c6abc464ac71ca734ea57a778872793d51ff29</id>
<content type='text'>
commit 6ee334559324a55725e22463de633b99ad99fcad upstream.

Pull up was reported as pull down and vice versa. Fix this.

Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints"
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6ee334559324a55725e22463de633b99ad99fcad upstream.

Pull up was reported as pull down and vice versa. Fix this.

Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints"
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
</feed>
