linux-stable.git/drivers/pinctrl, branch linux-5.0.y

pinctrl: samsung: fix leaked of_node references

2019-05-31T13:45:01+00:00

[ Upstream commit 44b9f86cd41db6c522effa5aec251d664a52fbc0 ]

The call to of_find_compatible_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.

Signed-off-by: Wen Yang 
Cc: Linus Walleij 
Cc: Tomasz Figa 
Cc: Sylwester Nawrocki 
Cc: Kukjin Kim 
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: st: fix leaked of_node references

2019-05-31T13:45:01+00:00

[ Upstream commit 483d70d73beaecab55882fcd2a357af72674e24c ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.

Signed-off-by: Wen Yang 
Cc: Patrice Chotard 
Cc: Linus Walleij 
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: Patrice Chotard 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: pistachio: fix leaked of_node references

2019-05-31T13:45:01+00:00

[ Upstream commit 44a4455ac2c6b0981eace683a2b6eccf47689022 ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function.

Signed-off-by: Wen Yang 
Cc: Linus Walleij 
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: zte: fix leaked of_node references

2019-05-31T13:44:54+00:00

[ Upstream commit 02d15f0d80720545f1f4922a1550ea4aaad4e152 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.

Signed-off-by: Wen Yang 
Cc: Linus Walleij 
Cc: Jun Nie 
Cc: Linus Walleij 
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Shawn Guo 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins

2019-04-05T20:34:51+00:00

[ Upstream commit 6daae00243e622dd3feec7965bfe421ad6dd317e ]

Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines.
Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to
rely on the bootloader to set them up correctly.

The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
  SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit  0: eth_rxd1 (DIF_0_P)
- register 6 bit  1: eth_rxd0 (DIF_0_N)
- register 6 bit  2: eth_rx_dv (DIF_1_P)
- register 6 bit  3: eth_rx_clk (DIF_1_N)
- register 6 bit  6: eth_tx_en (DIF_3_P)
- register 6 bit  8: eth_ref_clk (DIF_3_N)
- register 6 bit  9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)

All functions except eth_rxd2 and eth_rxd3 are already supported by the
pinctrl-meson8b driver.

Suggested-by: Jianxin Pan 
Signed-off-by: Martin Blumenstingl 
Reviewed-by: Kevin Hilman 
Tested-by: Emiliano Ingrassia 
Reviewed-by: Emiliano Ingrassia 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: sh-pfc: r8a77995: Fix MOD_SEL bit numbering

2019-04-05T20:34:49+00:00

[ Upstream commit 5219aa33caec2f7b68eda2b7e4ab8e276f323254 ]

MOD_SEL register bit numbering was different from R-Car D3 SoC and
R-Car H3/M3-[WN] SoCs.

MOD_SEL 1-bit      H3/M3-[WN]  D3
===============    ==========  =====
Set Value = H'0    b'0         b'0
Set Value = H'1    b'1         b'1

MOD_SEL 2-bits     H3/M3-[WN]  D3
===============    ==========  =====
Set Value = H'0    b'00        b'00
Set Value = H'1    b'01        b'10
Set Value = H'2    b'10        b'01
Set Value = H'3    b'11        b'11

MOD_SEL 3-bits     H3/M3-[WN]  D3
===============    ==========  =====
Set Value = H'0    b'000       b'000
Set Value = H'1    b'001       b'100
Set Value = H'2    b'010       b'010
Set Value = H'3    b'011       b'110
Set Value = H'4    b'100       b'001
Set Value = H'5    b'101       b'101
Set Value = H'6    b'110       b'011
Set Value = H'7    b'111       b'111

This patch replaces the #define name and value of MOD_SEL.

Signed-off-by: Takeshi Kihara 
Fixes: 794a67117646 ("pinctrl: sh-pfc: Initial R8A77995 PFC support")
[shimoda: split a patch per SoC and revise the commit log]
Signed-off-by: Yoshihiro Shimoda 
[geert: Use a macro to do the actual reordering]
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Simon Horman 
Signed-off-by: Sasha Levin

pinctrl: sh-pfc: r8a77990: Fix MOD_SEL bit numbering

2019-04-05T20:34:49+00:00

[ Upstream commit 3e3eebeacad79bda8a9664c86c04f5201e86fece ]

MOD_SEL register bit numbering was different from R-Car E3 SoC and
R-Car H3/M3-[WN] SoCs.

MOD_SEL 1-bit      H3/M3-[WN]  E3
===============    ==========  =====
Set Value = H'0    b'0         b'0
Set Value = H'1    b'1         b'1

MOD_SEL 2-bits     H3/M3-[WN]  E3
===============    ==========  =====
Set Value = H'0    b'00        b'00
Set Value = H'1    b'01        b'10
Set Value = H'2    b'10        b'01
Set Value = H'3    b'11        b'11

MOD_SEL 3-bits     H3/M3-[WN]  E3
===============    ==========  =====
Set Value = H'0    b'000       b'000
Set Value = H'1    b'001       b'100
Set Value = H'2    b'010       b'010
Set Value = H'3    b'011       b'110
Set Value = H'4    b'100       b'001
Set Value = H'5    b'101       b'101
Set Value = H'6    b'110       b'011
Set Value = H'7    b'111       b'111

This patch replaces the #define name and value of MOD_SEL.

Signed-off-by: Takeshi Kihara 
Fixes: 6d4036a1e3b3 ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
[shimoda: Split a patch per SoC and revise the commit log]
Signed-off-by: Yoshihiro Shimoda 
[geert: Use macros to do the actual reordering]
Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Yoshihiro Shimoda 
Signed-off-by: Sasha Levin

pinctrl: meson: fix G12A ao pull registers base address

2019-04-05T20:34:49+00:00

[ Upstream commit e66dd48e8b0dee104d16417d30361074b08baca8 ]

Since Meson G12A SoC, Introduce new ao registers AO_RTI_PULL_UP_EN_REG
and AO_GPIO_O.

These bits of controlling output level are remapped to the new register
AO_GPIO_O, and the AO_GPIO_O_EN_N support only controlling output enable.

These bits of controlling pull enable are remapped to the new register
AO_RTI_PULL_UP_EN_REG, and the AO_RTI_PULL_UP_REG support only controlling
pull type(up/down).

The new layout of ao gpio/pull registers is as follows:
- AO_GPIO_O_EN_N        [offset: 0x9 << 2]
- AO_GPIO_I             [offset: 0xa << 2]
- AO_RTI_PULL_UP_REG    [offset: 0xb << 2]
- AO_RTI_PULL_UP_EN_REG [offset: 0xc << 2]
- AO_GPIO_O             [offset: 0xd << 2]

From above, we can see ao GPIO registers region has been separated by the
ao pull registers. In order to ensure the continuity of the region on
software, the ao GPIO and ao pull registers use the same base address, but
can be identified by the offset.

Fixes: 29ae0952e85f ("pinctrl: meson-g12a: add pinctrl driver support")
Signed-off-by: Xingyu Chen 
Signed-off-by: Jianxin Pan 
Signed-off-by: Jerome Brunet 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins

2019-02-17T21:24:32+00:00

Fix the mismatch between the "sdxc_d13_1_a" pin group definition from
meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a").
This makes it possible to use "sdxc_d13_1_a" in device-tree files to
route the MMC data 1..3 pins to GPIOX_1..3.

Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl 
Signed-off-by: Linus Walleij

pinctrl: qcom: qcs404: Correct SDC tile

2019-02-11T08:15:04+00:00

The SDC controls live in the south tile, not the north one. Correct this
so that we program the right registers.

Cc: stable@vger.kernel.org
Fixes: 22eb8301dbc1 ("pinctrl: qcom: Add qcs404 pinctrl driver")
Signed-off-by: Bjorn Andersson 
Reviewed-by: Vinod Koul 
Signed-off-by: Linus Walleij