linux-stable.git/drivers/pinctrl/qcom, branch v5.15 Linux kernel stable tree Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic 2021-10-08T18:57:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-10-08T18:57:54+00:00 0dcf60d0014001a2dcae61169c8f72b775c2e48a Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally 
Pull asm-generic fixes from Arnd Bergmann:
 "There is one build fix for Arm platforms that ended up impacting most
  architectures because of the way the drivers/firmware Kconfig file is
  wired up:

  The CONFIG_QCOM_SCM dependency have caused a number of randconfig
  regressions over time, and some still remain in v5.15-rc4. The fix we
  agreed on in the end is to make this symbol selected by any driver
  using it, and then building it even for non-Arm platforms with
  CONFIG_COMPILE_TEST.

  To make this work on all architectures, the drivers/firmware/Kconfig
  file needs to be included for all architectures to make the symbol
  itself visible.

  In a separate discussion, we found that a sound driver patch that is
  pending for v5.16 needs the same change to include this Kconfig file,
  so the easiest solution seems to have my Kconfig rework included in
  v5.15.

  Finally, the branch also includes a small unrelated build fix for
  NOMMU architectures"

Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/

* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
  qcom_scm: hide Kconfig symbol
  firmware: include drivers/firmware/Kconfig unconditionally
qcom_scm: hide Kconfig symbol 2021-10-07T14:51:57+00:00 Arnd Bergmann arnd@arndb.de 2021-09-28T07:50:27+00:00 424953cf3c6657f1e67e1a2c5d6e3bb518ea4e9a Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:

aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'

ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>>               gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a

This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.

This appears to be an endless problem, so try something different this
time:

 - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
   but that is simply selected by all of its users

 - All the stubs in include/linux/qcom_scm.h can go away

 - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
   allow compile-testing QCOM_SCM on all architectures.

 - To avoid a circular dependency chain involving RESET_CONTROLLER
   and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
   According to my testing this still builds fine, and the QCOM
   platform selects this symbol already.

Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pinctrl: qcom: sc7280: Add PM suspend callbacks 2021-09-23T21:09:14+00:00 Rajendra Nayak rnayak@codeaurora.org 2021-09-23T09:31:27+00:00 28406a21999152ff7faa30b194f734565bdd8e0d Use PM suspend callbacks from msm core, without this the hog_sleep pins don't change state in suspend. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1632389487-11283-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Use PM suspend callbacks from msm core, without this the hog_sleep
pins don't change state in suspend.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632389487-11283-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: qcom: spmi-gpio: correct parent irqspec translation 2021-09-16T23:06:44+00:00 David Collins collinsd@codeaurora.org 2021-09-16T13:21:37+00:00 d36a97736b2cc9b13db0dfdf6f32b115ec193614 pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000. Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: satya priya <skakit@codeaurora.org> Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
pmic_gpio_child_to_parent_hwirq() and
gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl-
spmi-gpio irqspec to an SPMI controller irqspec.  When they do
this, they use a fixed SPMI slave ID of 0 and a fixed GPIO
peripheral offset of 0xC0 (corresponding to SPMI address 0xC000).
This translation results in an incorrect irqspec for secondary
PMICs that don't have a slave ID of 0 as well as for PMIC chips
which have GPIO peripherals located at a base address other than
0xC000.

Correct this issue by passing the slave ID of the pinctrl-spmi-
gpio device's parent in the SPMI controller irqspec and by
calculating the peripheral ID base from the device tree 'reg'
property of the pinctrl-spmi-gpio device.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2021-09-02T21:22:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-02T21:22:56+00:00 c793011242d182e5f12800c12dbaf37af80be735 Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ... 
Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.15 kernel cycle, no
  core changes at all this time, just driver work!

  New drivers:

   - New subdriver for Intel Keem Bay (an ARM-based SoC)

   - New subdriver for Qualcomm MDM9607 and SM6115

   - New subdriver for ST Microelectronics STM32MP135

   - New subdriver for Freescale i.MX8ULP ("Ultra Low Power")

   - New subdriver for Ingenic X2100

   - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO

   - Support Samsung Exynos850

   - Support Renesas RZ/G2L

  Enhancements:

   - A major refactoring of the Rockchip driver, breaking part of it out
     to a separate GPIO driver in drivers/gpio

   - Pin bias support on Renesas r8a77995

   - Add SCI pins support to Ingenic JZ4755 and JZ4760

   - Mediatek device tree bindings converted to YAML"

* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
  pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
  pinctrl: samsung: Add Exynos850 SoC specific data
  dt-bindings: pinctrl: samsung: Add Exynos850 doc
  MAINTAINERS: Add maintainers for amd-pinctrl driver
  pinctrl: Add Intel Keem Bay pinctrl driver
  dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
  pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
  dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
  dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
  dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
  dt-bindings: mediatek: convert pinctrl to yaml
  arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
  arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
  pinctrl: ingenic: Add .max_register in regmap_config
  pinctrl: ingenic: Fix bias config for X2000(E)
  pinctrl: ingenic: Fix incorrect pull up/down info
  pinctrl: Ingenic: Add pinctrl driver for X2100.
  dt-bindings: pinctrl: Add bindings for Ingenic X2100.
  pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
  pinctrl: Ingenic: Improve the code.
  ...
Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2021-08-30T21:38:37+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-08-30T21:38:37+00:00 7d6e3fa87e732ec1e7761bf325c0907685c8571b Pull irq updates from Thomas Gleixner: "Updates to the interrupt core and driver subsystems: Core changes: - The usual set of small fixes and improvements all over the place, but nothing stands out MSI changes: - Further consolidation of the PCI/MSI interrupt chip code - Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts of platform devices in the same way as PCI exposes them. Driver changes: - Support for ARM GICv3 EPPI partitions - Treewide conversion to generic_handle_domain_irq() for all chained interrupt controllers - Conversion to bitmap_zalloc() throughout the irq chip drivers - The usual set of small fixes and improvements" * tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) platform-msi: Add ABI to show msi_irqs of platform devices genirq/msi: Move MSI sysfs handling from PCI to MSI core genirq/cpuhotplug: Demote debug printk to KERN_DEBUG irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy irqdomain: Export irq_domain_disconnect_hierarchy() irqchip/gic-v3: Fix priority comparison when non-secure priorities are used irqchip/apple-aic: Fix irq_disable from within irq handlers pinctrl/rockchip: drop the gpio related codes gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type gpio/rockchip: support next version gpio controller gpio/rockchip: use struct rockchip_gpio_regs for gpio controller gpio/rockchip: add driver for rockchip gpio dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank pinctrl/rockchip: add pinctrl device to gpio bank struct pinctrl/rockchip: separate struct rockchip_pin_bank to a head file pinctrl/rockchip: always enable clock for gpio controller genirq: Fix kernel doc indentation EDAC/altera: Convert to generic_handle_domain_irq() powerpc: Bulk conversion to generic_handle_domain_irq() nios2: Bulk conversion to generic_handle_domain_irq() ... 
Pull irq updates from Thomas Gleixner:
 "Updates to the interrupt core and driver subsystems:

  Core changes:

   - The usual set of small fixes and improvements all over the place,
     but nothing stands out

  MSI changes:

   - Further consolidation of the PCI/MSI interrupt chip code

   - Make MSI sysfs code independent of PCI/MSI and expose the MSI
     interrupts of platform devices in the same way as PCI exposes them.

  Driver changes:

   - Support for ARM GICv3 EPPI partitions

   - Treewide conversion to generic_handle_domain_irq() for all chained
     interrupt controllers

   - Conversion to bitmap_zalloc() throughout the irq chip drivers

   - The usual set of small fixes and improvements"

* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  platform-msi: Add ABI to show msi_irqs of platform devices
  genirq/msi: Move MSI sysfs handling from PCI to MSI core
  genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
  irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
  irqdomain: Export irq_domain_disconnect_hierarchy()
  irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
  irqchip/apple-aic: Fix irq_disable from within irq handlers
  pinctrl/rockchip: drop the gpio related codes
  gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
  gpio/rockchip: support next version gpio controller
  gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
  gpio/rockchip: add driver for rockchip gpio
  dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  pinctrl/rockchip: add pinctrl device to gpio bank struct
  pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
  pinctrl/rockchip: always enable clock for gpio controller
  genirq: Fix kernel doc indentation
  EDAC/altera: Convert to generic_handle_domain_irq()
  powerpc: Bulk conversion to generic_handle_domain_irq()
  nios2: Bulk conversion to generic_handle_domain_irq()
  ...
pinctrl: Bulk conversion to generic_handle_domain_irq() 2021-08-12T10:39:39+00:00 Marc Zyngier maz@kernel.org 2021-05-04T16:42:18+00:00 a9cb09b7be84a7adc9e6f4aaf8d770933d65f953 Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> 
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
pinctrl: qcom: spmi-gpio: Add pmc8180 & pmc8180c 2021-08-10T12:37:36+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2021-06-29T00:38:51+00:00 182700f258531c75846cb0f070e847e8b4c457b2 The SC8180x platform comes with PMC8180 and PMC8180c, add support for the GPIO controller in these PMICs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210629003851.1787673-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The SC8180x platform comes with PMC8180 and PMC8180c, add support for
the GPIO controller in these PMICs.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210629003851.1787673-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers: qcom: pinctrl: Add pinctrl driver for sm6115 2021-07-31T21:23:06+00:00 Iskren Chernev iskren.chernev@gmail.com 2021-07-23T19:23:52+00:00 4b77f1dff5a67bbae9ec44ab97c1e354d893d975 Based on CAF implementation with egpio/wake_reg support removed. Similar function names were merged to reduce total number of functions. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210723192352.546902-3-iskren.chernev@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Based on CAF implementation with egpio/wake_reg support removed.

Similar function names were merged to reduce total number of functions.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210723192352.546902-3-iskren.chernev@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: qcom/pinctrl-spmi-gpio: Add compatible for pmic-gpio on SA8155p-adp 2021-07-23T16:20:32+00:00 Bhupesh Sharma bhupesh.sharma@linaro.org 2021-06-29T12:34:07+00:00 79e2311c876c276566e3fb84ba33682eb540874b SA8155p-adp PMIC (PMM8155AU) exposes 10 GPIOs. Add support for the same in the pinctrl driver. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210629123407.82561-5-bhupesh.sharma@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
SA8155p-adp PMIC (PMM8155AU) exposes 10 GPIOs.

Add support for the same in the pinctrl driver.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210629123407.82561-5-bhupesh.sharma@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>