linux-stable.git/drivers/pinctrl/nomadik, branch linux-5.7.y Linux kernel stable tree pinctrl: Use new GPIO_LINE_DIRECTION 2020-02-21T14:19:42+00:00 Matti Vaittinen matti.vaittinen@fi.rohmeurope.com 2020-02-14T13:57:12+00:00 3c827873590c3f49c76d540c1e646135a11e0b4e Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0.

Main benefit is to make it easier to see which values mean IN and which
OUT. As a side effect this helps GPIO framework to change the direction
defines to something else if ever needed.

Please note that return value from get_direction call on
pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have
returned value 2 for direction INPUT.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: nomadik: db8500: Add mc0_a_2 pin group without direction control 2019-11-19T14:49:22+00:00 Stephan Gerhold stephan@gerhold.net 2019-11-17T20:54:39+00:00 58afa801ef22bdc47ed4a1f1d4d9e52ca25777e7 Some devices do not make use of the CMD0/DAT0/DAT2 direction control pins of the MMC/SD card 0 interface. In this case we should leave those pins unconfigured. A similar case already exists for "mc1_a_1" vs "mc1_a_2" when the MC1_FBCLK pin is not used. Add a new "mc0_a_2" pin group which is equal to "mc0_a_1" except with the MC0_CMDDIR, MC0_DAT0DIR and MC0_DAT2DIR pins removed. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191117205439.239211-1-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Some devices do not make use of the CMD0/DAT0/DAT2 direction control
pins of the MMC/SD card 0 interface. In this case we should leave
those pins unconfigured.

A similar case already exists for "mc1_a_1" vs "mc1_a_2"
when the MC1_FBCLK pin is not used.

Add a new "mc0_a_2" pin group which is equal to "mc0_a_1" except
with the MC0_CMDDIR, MC0_DAT0DIR and MC0_DAT2DIR pins removed.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191117205439.239211-1-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: nomadik: Simplify interrupt handler 2019-10-16T13:56:19+00:00 Linus Walleij linus.walleij@linaro.org 2019-10-14T11:11:54+00:00 22406b3efc0698f88919167702532c3dd95406c8 The inner interrupt handler was for the latent IRQ handling, and that will never be used, inline the unnecessary function. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191014111154.9731-3-linus.walleij@linaro.org 
The inner interrupt handler was for the latent IRQ handling,
and that will never be used, inline the unnecessary function.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191014111154.9731-3-linus.walleij@linaro.org
pinctrl: nomadik: Pass irqchip when adding gpiochip 2019-10-16T13:56:19+00:00 Linus Walleij linus.walleij@linaro.org 2019-10-14T11:11:53+00:00 2da7852e54edc917ef27077fb8ade85f6a5e6394 We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191014111154.9731-2-linus.walleij@linaro.org 
We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191014111154.9731-2-linus.walleij@linaro.org
pinctrl: nomadik: Drop support for latent IRQ 2019-10-16T13:56:19+00:00 Linus Walleij linus.walleij@linaro.org 2019-10-14T11:11:52+00:00 b95e0bd23e3603a0360bac0c28de8e836f1148ca The latent IRQs are IRQs that have occurred when the system was down in deep sleep and the GPIO block was powered off. The PRCMU (power reset and control unit) knows which GPIO line offset fired an IRQ to wake the system up (if so desired) and this second IRQ was used to replay the action when the system came back online after suspend(). This is now known to be the wrong approach to solve this problem: in a patch series Lina Iyer has suggested to instead make it possible to model the IRQs as hierarchical with double parents. Also the current device trees do not contain the right information to make this code work, the latent IRQ is not specified nowadays giving noise like this in the console: [ 0.612168] gpio 8012e000.gpio: IRQ index 1 not found [ 0.622523] gpio 8012e080.gpio: IRQ index 1 not found Let's delete the latent IRQ code and reimplement it properly when we need it. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191014111154.9731-1-linus.walleij@linaro.org 
The latent IRQs are IRQs that have occurred when the system
was down in deep sleep and the GPIO block was powered off.
The PRCMU (power reset and control unit) knows which GPIO
line offset fired an IRQ to wake the system up (if so
desired) and this second IRQ was used to replay the action
when the system came back online after suspend().

This is now known to be the wrong approach to solve this
problem: in a patch series Lina Iyer has suggested to
instead make it possible to model the IRQs as hierarchical
with double parents.

Also the current device trees do not contain the right
information to make this code work, the latent IRQ is not
specified nowadays giving noise like this in the console:

[    0.612168] gpio 8012e000.gpio: IRQ index 1 not found
[    0.622523] gpio 8012e080.gpio: IRQ index 1 not found

Let's delete the latent IRQ code and reimplement it properly
when we need it.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191014111154.9731-1-linus.walleij@linaro.org
pinctrl: nomadik: abx500: Add of_node_put() before return 2019-08-06T12:51:59+00:00 Nishka Dasgupta nishkadg.linux@gmail.com 2019-08-04T15:51:54+00:00 f452444709c07ea5d126e9f312f602ac9c5e34fd Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190804155154.4916-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190804155154.4916-1-nishkadg.linux@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: nomadik: nomadik: Add of_node_put() before return 2019-08-06T12:51:13+00:00 Nishka Dasgupta nishkadg.linux@gmail.com 2019-08-04T15:51:17+00:00 ea8cf5c518502a12cb5bab935fd7bc152822e520 Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190804155117.4753-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190804155117.4753-1-nishkadg.linux@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19T15:09:55+00:00 Thomas Gleixner tglx@linutronix.de 2019-06-04T08:11:33+00:00 d2912cb15bdda8ba4a5dd73396ad62641af2f520 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194 2019-05-30T18:29:22+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-28T16:57:21+00:00 af873fcecef567abf8a3468b06dd4e4aab46da6d Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 1 normalized pattern(s):

  license terms gnu general public license gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 161 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21T08:50:46+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-19T12:07:45+00:00 ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1 Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>