<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/pinctrl/mediatek, branch v6.16.2</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Merge tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl</title>
<updated>2025-05-30T16:46:28+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2025-05-30T16:46:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=eafd95ea74846eda3e3eac6b2bb7f34619d8a6f8'/>
<id>eafd95ea74846eda3e3eac6b2bb7f34619d8a6f8</id>
<content type='text'>
Pull pin control updates from Linus Walleij:
 "An especially linear and sparse improvement and new drivers release.
  Nothing exciting. The biggest change in Bartosz changes to make
  gpiochip set/get calls return error codes (something we should have
  fixed ages ago but is now finally getting fixed.)

  Core changes:

   - Add the devres devm_pinctrl_register_mappings() call that can
     register some pin control machine mappings and have them go away
     with the associated device

  New drivers:

   - Support for the Mediatek MT6893 and MT8196 SoCs

   - Support for the Renesas RZ/V2N SoC

   - Support for the NXP Freescale i.MX943 SoC

  Improvements:

   - Per-SoC suspend/resume callbacks in the Samsung drivers

   - Set all pins as input (High-Z) at probe in the MCP23S08 driver

   - Switch most GPIO chips to use the setters/getters with a return
     value

   - EGPIO support in the Qualcomm QCM2290 driver

   - Fix up the number of available GPIO lines in Qualcomm QCS8300 and
     QCS615"

* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: freescale: Add support for imx943 pinctrl
  pinctrl: core: add devm_pinctrl_register_mappings()
  pinctrl: remove extern specifier for functions in machine.h
  pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
  pinctrl: freescale: Enable driver if platform is enabled.
  pinctrl: freescale: Depend imx-scu driver on OF
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
  pinctrl: armada-37xx: set GPIO output value before setting direction
  pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs &gt; 31
  pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
  pinctrl: at91: Fix possible out-of-boundary access
  pinctrl: add stubs for OF-specific pinconf functions
  pinctrl: qcom: correct the ngpios entry for QCS8300
  pinctrl: qcom: correct the ngpios entry for QCS615
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull pin control updates from Linus Walleij:
 "An especially linear and sparse improvement and new drivers release.
  Nothing exciting. The biggest change in Bartosz changes to make
  gpiochip set/get calls return error codes (something we should have
  fixed ages ago but is now finally getting fixed.)

  Core changes:

   - Add the devres devm_pinctrl_register_mappings() call that can
     register some pin control machine mappings and have them go away
     with the associated device

  New drivers:

   - Support for the Mediatek MT6893 and MT8196 SoCs

   - Support for the Renesas RZ/V2N SoC

   - Support for the NXP Freescale i.MX943 SoC

  Improvements:

   - Per-SoC suspend/resume callbacks in the Samsung drivers

   - Set all pins as input (High-Z) at probe in the MCP23S08 driver

   - Switch most GPIO chips to use the setters/getters with a return
     value

   - EGPIO support in the Qualcomm QCM2290 driver

   - Fix up the number of available GPIO lines in Qualcomm QCS8300 and
     QCS615"

* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: freescale: Add support for imx943 pinctrl
  pinctrl: core: add devm_pinctrl_register_mappings()
  pinctrl: remove extern specifier for functions in machine.h
  pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
  pinctrl: freescale: Enable driver if platform is enabled.
  pinctrl: freescale: Depend imx-scu driver on OF
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
  pinctrl: armada-37xx: set GPIO output value before setting direction
  pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs &gt; 31
  pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
  pinctrl: at91: Fix possible out-of-boundary access
  pinctrl: add stubs for OF-specific pinconf functions
  pinctrl: qcom: correct the ngpios entry for QCS8300
  pinctrl: qcom: correct the ngpios entry for QCS615
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip</title>
<updated>2025-05-27T15:07:32+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2025-05-27T15:07:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2bd1bea5fa6aa79bc563a57919730eb809651b28'/>
<id>2bd1bea5fa6aa79bc563a57919730eb809651b28</id>
<content type='text'>
Pull irq cleanups from Thomas Gleixner:
 "A set of cleanups for the generic interrupt subsystem:

   - Consolidate on one set of functions for the interrupt domain code
     to get rid of pointlessly duplicated code with only marginal
     different semantics.

   - Update the documentation accordingly and consolidate the coding
     style of the irqdomain header"

* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  irqdomain: Consolidate coding style
  irqdomain: Fix kernel-doc and add it to Documentation
  Documentation: irqdomain: Update it
  Documentation: irq-domain.rst: Simple improvements
  Documentation: irq/concepts: Minor improvements
  Documentation: irq/concepts: Add commas and reflow
  irqdomain: Improve kernel-docs of functions
  irqdomain: Make struct irq_domain_info variables const
  irqdomain: Use irq_domain_instantiate()'s return value as initializers
  irqdomain: Drop irq_linear_revmap()
  pinctrl: keembay: Switch to irq_find_mapping()
  irqchip/armada-370-xp: Switch to irq_find_mapping()
  gpu: ipu-v3: Switch to irq_find_mapping()
  gpio: idt3243x: Switch to irq_find_mapping()
  sh: Switch to irq_find_mapping()
  powerpc: Switch to irq_find_mapping()
  irqdomain: Drop irq_domain_add_*() functions
  powerpc: Switch irq_domain_add_nomap() to use fwnode
  thermal: Switch to irq_domain_create_linear()
  soc: Switch to irq_domain_create_*()
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull irq cleanups from Thomas Gleixner:
 "A set of cleanups for the generic interrupt subsystem:

   - Consolidate on one set of functions for the interrupt domain code
     to get rid of pointlessly duplicated code with only marginal
     different semantics.

   - Update the documentation accordingly and consolidate the coding
     style of the irqdomain header"

* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  irqdomain: Consolidate coding style
  irqdomain: Fix kernel-doc and add it to Documentation
  Documentation: irqdomain: Update it
  Documentation: irq-domain.rst: Simple improvements
  Documentation: irq/concepts: Minor improvements
  Documentation: irq/concepts: Add commas and reflow
  irqdomain: Improve kernel-docs of functions
  irqdomain: Make struct irq_domain_info variables const
  irqdomain: Use irq_domain_instantiate()'s return value as initializers
  irqdomain: Drop irq_linear_revmap()
  pinctrl: keembay: Switch to irq_find_mapping()
  irqchip/armada-370-xp: Switch to irq_find_mapping()
  gpu: ipu-v3: Switch to irq_find_mapping()
  gpio: idt3243x: Switch to irq_find_mapping()
  sh: Switch to irq_find_mapping()
  powerpc: Switch to irq_find_mapping()
  irqdomain: Drop irq_domain_add_*() functions
  powerpc: Switch irq_domain_add_nomap() to use fwnode
  thermal: Switch to irq_domain_create_linear()
  soc: Switch to irq_domain_create_*()
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms</title>
<updated>2025-05-20T22:39:30+00:00</updated>
<author>
<name>Nícolas F. R. A. Prado</name>
<email>nfraprado@collabora.com</email>
</author>
<published>2025-05-20T21:15:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1c9977b263475373b31bbf86af94a5c9ae2be42c'/>
<id>1c9977b263475373b31bbf86af94a5c9ae2be42c</id>
<content type='text'>
Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple
addresses") introduced an access to the 'soc' field of struct
mtk_pinctrl in mtk_eint_do_init() and for that an include of
pinctrl-mtk-common-v2.h.

However, pinctrl drivers relying on the v1 common driver include
pinctrl-mtk-common.h instead, which provides another definition of
struct mtk_pinctrl that does not contain an 'soc' field.

Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it
will now try to dereference an invalid pointer when called on v1
platforms. This has been observed on Genio 350 EVK (MT8365), which
crashes very early in boot (the kernel trace can only be seen with
earlycon).

In order to fix this, since 'struct mtk_pinctrl' was only needed to get
a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter
of mtk_eint_do_init() so that callers need to supply it, removing
mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'.

Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses")
Suggested-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@collabora.com&gt;
Signed-off-by: Nícolas F. R. A. Prado &lt;nfraprado@collabora.com&gt;
Link: https://lore.kernel.org/20250520-genio-350-eint-null-ptr-deref-fix-v2-1-6a3ca966a7ba@collabora.com
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple
addresses") introduced an access to the 'soc' field of struct
mtk_pinctrl in mtk_eint_do_init() and for that an include of
pinctrl-mtk-common-v2.h.

However, pinctrl drivers relying on the v1 common driver include
pinctrl-mtk-common.h instead, which provides another definition of
struct mtk_pinctrl that does not contain an 'soc' field.

Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it
will now try to dereference an invalid pointer when called on v1
platforms. This has been observed on Genio 350 EVK (MT8365), which
crashes very early in boot (the kernel trace can only be seen with
earlycon).

In order to fix this, since 'struct mtk_pinctrl' was only needed to get
a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter
of mtk_eint_do_init() so that callers need to supply it, removing
mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'.

Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses")
Suggested-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@collabora.com&gt;
Signed-off-by: Nícolas F. R. A. Prado &lt;nfraprado@collabora.com&gt;
Link: https://lore.kernel.org/20250520-genio-350-eint-null-ptr-deref-fix-v2-1-6a3ca966a7ba@collabora.com
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: Switch to irq_domain_create_*()</title>
<updated>2025-05-16T19:06:11+00:00</updated>
<author>
<name>Jiri Slaby (SUSE)</name>
<email>jirislaby@kernel.org</email>
</author>
<published>2025-03-19T09:29:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=219182fe2190ddaf6288bf24dd9a43d2c96316d2'/>
<id>219182fe2190ddaf6288bf24dd9a43d2c96316d2</id>
<content type='text'>
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.

Note some of the users can likely use dev-&gt;fwnode directly instead of
indirect of_fwnode_handle(dev-&gt;of_node). But dev-&gt;fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).

[ tglx: Fix up subject prefix ]

Signed-off-by: Jiri Slaby (SUSE) &lt;jirislaby@kernel.org&gt;
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Link: https://lore.kernel.org/all/20250319092951.37667-31-jirislaby@kernel.org



</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.

Note some of the users can likely use dev-&gt;fwnode directly instead of
indirect of_fwnode_handle(dev-&gt;of_node). But dev-&gt;fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).

[ tglx: Fix up subject prefix ]

Signed-off-by: Jiri Slaby (SUSE) &lt;jirislaby@kernel.org&gt;
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Link: https://lore.kernel.org/all/20250319092951.37667-31-jirislaby@kernel.org



</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: common: use new GPIO line value setter callbacks</title>
<updated>2025-05-09T08:04:45+00:00</updated>
<author>
<name>Bartosz Golaszewski</name>
<email>bartosz.golaszewski@linaro.org</email>
</author>
<published>2025-04-25T09:01:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=23a5fa371c7725ec8ba5d21cd1c97bfb9080ea45'/>
<id>23a5fa371c7725ec8ba5d21cd1c97bfb9080ea45</id>
<content type='text'>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-5-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-5-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: moore: use new GPIO line value setter callbacks</title>
<updated>2025-05-09T08:04:45+00:00</updated>
<author>
<name>Bartosz Golaszewski</name>
<email>bartosz.golaszewski@linaro.org</email>
</author>
<published>2025-04-25T09:01:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8a3f17df00e6110f80e1970a93497901a40116bf'/>
<id>8a3f17df00e6110f80e1970a93497901a40116bf</id>
<content type='text'>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-4-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-4-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: paris: use new GPIO line value setter callbacks</title>
<updated>2025-05-09T08:04:45+00:00</updated>
<author>
<name>Bartosz Golaszewski</name>
<email>bartosz.golaszewski@linaro.org</email>
</author>
<published>2025-04-25T09:00:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1849d1a3d388caf898b18791c40edac464c809d1'/>
<id>1849d1a3d388caf898b18791c40edac464c809d1</id>
<content type='text'>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-3-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-3-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: paris: don't double-check the GPIO number</title>
<updated>2025-05-09T08:04:45+00:00</updated>
<author>
<name>Bartosz Golaszewski</name>
<email>bartosz.golaszewski@linaro.org</email>
</author>
<published>2025-04-25T09:00:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9c791cbaf3cf2671404dc4f7679548071b38e104'/>
<id>9c791cbaf3cf2671404dc4f7679548071b38e104</id>
<content type='text'>
GPIO core already makes sure we don't pass invalid GPIO numbers down to
the driver callbacks. Remove needless checks from the driver.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-2-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
GPIO core already makes sure we don't pass invalid GPIO numbers down to
the driver callbacks. Remove needless checks from the driver.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-2-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: airoha: use new GPIO line value setter callbacks</title>
<updated>2025-05-09T08:04:45+00:00</updated>
<author>
<name>Bartosz Golaszewski</name>
<email>bartosz.golaszewski@linaro.org</email>
</author>
<published>2025-04-25T09:00:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7464c88169325c8540266800787880e1fbf1bd85'/>
<id>7464c88169325c8540266800787880e1fbf1bd85</id>
<content type='text'>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Acked-by: Lorenzo Bianconi &lt;lorenzo@kernel.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-1-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@linaro.org&gt;
Acked-by: Lorenzo Bianconi &lt;lorenzo@kernel.org&gt;
Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-1-93e6a01855e7@linaro.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()</title>
<updated>2025-04-23T10:58:57+00:00</updated>
<author>
<name>Dan Carpenter</name>
<email>dan.carpenter@linaro.org</email>
</author>
<published>2025-04-23T08:23:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=446d28584723e5d4bcdb18cf6ef87cb2bb597dd8'/>
<id>446d28584723e5d4bcdb18cf6ef87cb2bb597dd8</id>
<content type='text'>
The devm_kzalloc() function doesn't return error pointers, it returns
NULL on error.  Then on the next line it checks the same pointer again
by mistake, "-&gt;base" instead of "-&gt;base[0]".

Fixes: fe412e3a6c97 ("pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers")
Signed-off-by: Dan Carpenter &lt;dan.carpenter@linaro.org&gt;
Link: https://lore.kernel.org/aAijc10fHka1WAMX@stanley.mountain
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The devm_kzalloc() function doesn't return error pointers, it returns
NULL on error.  Then on the next line it checks the same pointer again
by mistake, "-&gt;base" instead of "-&gt;base[0]".

Fixes: fe412e3a6c97 ("pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers")
Signed-off-by: Dan Carpenter &lt;dan.carpenter@linaro.org&gt;
Link: https://lore.kernel.org/aAijc10fHka1WAMX@stanley.mountain
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
