linux-stable.git/drivers/pinctrl/intel, branch linux-5.10.y Linux kernel stable tree pinctrl: cherryview: fix address_space_handler() argument 2023-09-19T10:20:24+00:00 Raag Jadav raag.jadav@intel.com 2023-08-22T07:23:40+00:00 690a22d6c5816dae8fbb9f6b41e3ae40a71dd3b1 commit d5301c90716a8e20bc961a348182daca00c8e8f0 upstream. First argument of acpi_*_address_space_handler() APIs is acpi_handle of the device, which is incorrectly passed in driver ->remove() path here. Fix it by passing the appropriate argument and while at it, make both API calls consistent using ACPI_HANDLE(). Fixes: a0b028597d59 ("pinctrl: cherryview: Add support for GMMR GPIO opregion") Cc: stable@vger.kernel.org Signed-off-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d5301c90716a8e20bc961a348182daca00c8e8f0 upstream.

First argument of acpi_*_address_space_handler() APIs is acpi_handle of
the device, which is incorrectly passed in driver ->remove() path here.
Fix it by passing the appropriate argument and while at it, make both
API calls consistent using ACPI_HANDLE().

Fixes: a0b028597d59 ("pinctrl: cherryview: Add support for GMMR GPIO opregion")
Cc: stable@vger.kernel.org
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: cherryview: Return correct value if pin in push-pull mode 2023-07-27T06:43:57+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2023-06-05T14:37:34+00:00 5533f0eb0a2935ca612fe3357b593e9bb45d05cd [ Upstream commit 5835196a17be5cfdcad0b617f90cf4abe16951a4 ] Currently the getter returns ENOTSUPP on pin configured in the push-pull mode. Fix this by adding the missed switch case. Fixes: ccdf81d08dbe ("pinctrl: cherryview: add option to set open-drain pin config") Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5835196a17be5cfdcad0b617f90cf4abe16951a4 ]

Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.

Fixes: ccdf81d08dbe ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: intel: Restore the pins that used to be in Direct IRQ mode 2023-02-15T16:22:25+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2023-02-06T14:15:59+00:00 bbc850904457567e5e3bf431e38dd039742887aa [ Upstream commit a8520be3ffef3d25b53bf171a7ebe17ee0154175 ] If the firmware mangled the register contents too much, check the saved value for the Direct IRQ mode. If it matches, we will restore the pin state. Reported-by: Jim Minter <jimminter@microsoft.com> Fixes: 6989ea4881c8 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode") Tested-by: Jim Minter <jimminter@microsoft.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20230206141558.20916-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a8520be3ffef3d25b53bf171a7ebe17ee0154175 ]

If the firmware mangled the register contents too much,
check the saved value for the Direct IRQ mode. If it
matches, we will restore the pin state.

Reported-by: Jim Minter <jimminter@microsoft.com>
Fixes: 6989ea4881c8 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode")
Tested-by: Jim Minter <jimminter@microsoft.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230206141558.20916-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: intel: Save and restore pins in "direct IRQ" mode 2022-12-08T10:23:57+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2022-11-24T22:29:26+00:00 549e24409ac579b4ad871d43d8781a1dc9b4aaeb commit 6989ea4881c8944fbf04378418bb1af63d875ef8 upstream. The firmware on some systems may configure GPIO pins to be an interrupt source in so called "direct IRQ" mode. In such cases the GPIO controller driver has no idea if those pins are being used or not. At the same time, there is a known bug in the firmwares that don't restore the pin settings correctly after suspend, i.e. by an unknown reason the Rx value becomes inverted. Hence, let's save and restore the pins that are configured as GPIOs in the input mode with GPIROUTIOXAPIC bit set. Cc: stable@vger.kernel.org Reported-and-tested-by: Dale Smith <dalepsmith@gmail.com> Reported-and-tested-by: John Harris <jmharris@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6989ea4881c8944fbf04378418bb1af63d875ef8 upstream.

The firmware on some systems may configure GPIO pins to be
an interrupt source in so called "direct IRQ" mode. In such
cases the GPIO controller driver has no idea if those pins
are being used or not. At the same time, there is a known bug
in the firmwares that don't restore the pin settings correctly
after suspend, i.e. by an unknown reason the Rx value becomes
inverted.

Hence, let's save and restore the pins that are configured
as GPIOs in the input mode with GPIROUTIOXAPIC bit set.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Dale Smith <dalepsmith@gmail.com>
Reported-and-tested-by: John Harris <jmharris@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: intel: Check against matching data instead of ACPI companion 2022-08-25T09:38:15+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2022-06-06T16:41:28+00:00 84d94619c7cfb9274ddad840a99417f8c0b9fd77 [ Upstream commit c551bd81d198bf1dcd4398d5454acdc0309dbe77 ] In some cases we may get a platform device that has ACPI companion which is different to the pin control described in the ACPI tables. This is primarily happens when device is instantiated by board file. In order to allow this device being enumerated, refactor intel_pinctrl_get_soc_data() to check the matching data instead of ACPI companion. Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c551bd81d198bf1dcd4398d5454acdc0309dbe77 ]

In some cases we may get a platform device that has ACPI companion
which is different to the pin control described in the ACPI tables.
This is primarily happens when device is instantiated by board file.

In order to allow this device being enumerated, refactor
intel_pinctrl_get_soc_data() to check the matching data instead of
ACPI companion.

Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: intel: fix unexpected interrupt 2022-02-08T17:30:39+00:00 Łukasz Bartosik lb@semihalf.com 2022-01-24T12:55:29+00:00 752d9eafc64e7a1f8a62f6b3fad2086ba8c73058 commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream. ASUS Chromebook C223 with Celeron N3350 crashes sometimes during cold booot. Inspection of the kernel log showed that it gets into an inifite loop logging the following message: ->handle_irq(): 000000009cdb51e8, handle_bad_irq+0x0/0x251 ->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7 ->action(): 00000 IRQ_NOPROBE set unexpected IRQ trap at vector 7c The issue happens during cold boot but only if cold boot happens at most several dozen seconds after Chromebook is powered off. For longer intervals between power off and power on (cold boot) the issue does not reproduce. The unexpected interrupt is sourced from INT3452 GPIO pin which is used for SD card detect. Investigation relevealed that when the interval between power off and power on (cold boot) is less than several dozen seconds then values of INT3452 GPIO interrupt enable and interrupt pending registers survive power off and power on sequence and interrupt for SD card detect pin is enabled and pending during probe of SD controller which causes the unexpected IRQ message. "Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc mentions that GPIO interrupt enable and status registers default value is 0x0. The fix clears INT3452 GPIO interrupt enabled and interrupt pending registers in its probe function. Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream.

ASUS Chromebook C223 with Celeron N3350 crashes sometimes during
cold booot. Inspection of the kernel log showed that it gets into
an inifite loop logging the following message:

->handle_irq():  000000009cdb51e8, handle_bad_irq+0x0/0x251
->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7
->action(): 00000
   IRQ_NOPROBE set
unexpected IRQ trap at vector 7c

The issue happens during cold boot but only if cold boot happens
at most several dozen seconds after Chromebook is powered off. For
longer intervals between power off and power on (cold boot) the issue
does not reproduce. The unexpected interrupt is sourced from INT3452
GPIO pin which is used for SD card detect. Investigation relevealed
that when the interval between power off and power on (cold boot)
is less than several dozen seconds then values of INT3452 GPIO interrupt
enable and interrupt pending registers survive power off and power
on sequence and interrupt for SD card detect pin is enabled and pending
during probe of SD controller which causes the unexpected IRQ message.
"Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc
mentions that GPIO interrupt enable and status registers default
value is 0x0.
The fix clears INT3452 GPIO interrupt enabled and interrupt pending
registers in its probe function.

Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line 2022-02-08T17:30:38+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2022-01-19T18:19:15+00:00 14bc9978b486d0780f1d1d834202c899da68c47d commit e12963c453263d5321a2c610e98cbc731233b685 upstream. The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") hadn't taken into account an update of the IRQ flags scenario. When updating the IRQ flags on the preconfigured line the ->irq_set_type() is called again. In such case the sequential Rx buffer configuration changes may trigger a falling or rising edge interrupt that may lead, on some platforms, to an undesired event. This may happen because each of intel_gpio_set_gpio_mode() and __intel_gpio_set_direction() updates the pad configuration with a different value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is called only for the pads that are configured as an input. Due to this fact, integrate the logic of __intel_gpio_set_direction() call into the intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and immediately re-enabled. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") Reported-by: Kane Chen <kane.chen@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Grace Kao <grace.kao@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e12963c453263d5321a2c610e98cbc731233b685 upstream.

The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer
when switching to GPIO") hadn't taken into account an update of the IRQ
flags scenario.

When updating the IRQ flags on the preconfigured line the ->irq_set_type()
is called again. In such case the sequential Rx buffer configuration
changes may trigger a falling or rising edge interrupt that may lead,
on some platforms, to an undesired event.

This may happen because each of intel_gpio_set_gpio_mode() and
__intel_gpio_set_direction() updates the pad configuration with a different
value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is
called only for the pads that are configured as an input. Due to this fact,
integrate the logic of __intel_gpio_set_direction() call into the
intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and
immediately re-enabled.

Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
Reported-by: Kane Chen <kane.chen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: tigerlake: Fix GPIO mapping for newer version of software 2021-08-18T06:59:09+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2021-08-04T11:21:41+00:00 750503aecf4ef243c51597441f8364e0aa4708a6 [ Upstream commit 2f658f7a3953f6d70bab90e117aff8d0ad44e200 ] The software mapping for GPIO, which initially comes from Microsoft, is subject to change by respective Windows and firmware developers. Due to the above the driver had been written and published way ahead of the schedule, and thus the numbering schema used in it is outdated. Fix the numbering schema in accordance with the real products on market. Fixes: 653d96455e1e ("pinctrl: tigerlake: Add support for Tiger Lake-H") Reported-and-tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: Riccardo Mori <patacca@autistici.org> Reported-and-tested-by: Lovesh <lovesh.bond@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213463 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213579 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213857 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2f658f7a3953f6d70bab90e117aff8d0ad44e200 ]

The software mapping for GPIO, which initially comes from Microsoft,
is subject to change by respective Windows and firmware developers.
Due to the above the driver had been written and published way ahead
of the schedule, and thus the numbering schema used in it is outdated.

Fix the numbering schema in accordance with the real products on market.

Fixes: 653d96455e1e ("pinctrl: tigerlake: Add support for Tiger Lake-H")
Reported-and-tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Riccardo Mori <patacca@autistici.org>
Reported-and-tested-by: Lovesh <lovesh.bond@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213463
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213579
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213857
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: lewisburg: Update number of pins in community 2021-04-28T11:39:59+00:00 Yuanyuan Zhong yzhong@purestorage.com 2021-04-12T23:17:59+00:00 2bbd8aafde362e2d2bb3af3ce2ea400c3860073f [ Upstream commit 196d941753297d0ca73c563ccd7d00be049ec226 ] When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly. Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6") Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 196d941753297d0ca73c563ccd7d00be049ec226 ]

When updating pin names for Intel Lewisburg, the numbers of pins were
left behind. Update them accordingly.

Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6")
Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request 2020-12-09T08:08:18+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2020-12-08T18:24:03+00:00 e8873c0afd34beb67ec492cd648dd0095b911f65 Mistakenly the buffers (input and output) become enabled together for a short period of time during GPIO request. This is problematic, because instead of initial motive to disable them in the commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO"), the driven value on the pin, which might be used as an IRQ line, brings firmwares of some touch pads to an awkward state that needs a full power off to recover. Fix this, as stated in the culprit commit, by disabling the buffers. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210497 Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20201208182403.40435-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Mistakenly the buffers (input and output) become enabled together for a short
period of time during GPIO request. This is problematic, because instead of
initial motive to disable them in the commit af7e3eeb84e2
("pinctrl: intel: Disable input and output buffer when switching to GPIO"),
the driven value on the pin, which might be used as an IRQ line, brings
firmwares of some touch pads to an awkward state that needs a full power off
to recover. Fix this, as stated in the culprit commit, by disabling the buffers.

Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210497
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20201208182403.40435-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>