linux-stable.git/drivers/pinctrl/freescale, branch v4.8

Merge tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2016-07-29T00:06:51+00:00

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.8 kernel cycle.

  Nothing stands out as especially exiting: new drivers, new subdrivers,
  lots of cleanups and incremental features.

  Business as usual.

  New drivers:

   - New driver for Oxnas pin control and GPIO.  This ARM-based chipset
     is used in a few storage (NAS) type devices.

   - New driver for the MAX77620/MAX20024 pin controller portions.

   - New driver for the Intel Merrifield pin controller.

  New subdrivers:

   - New subdriver for the Qualcomm MDM9615

   - New subdriver for the STM32F746 MCU

   - New subdriver for the Broadcom NSP SoC.

  Cleanups:

   - Demodularization of bool compiled-in drivers.

  Apart from this there is just regular incremental improvements to a
  lot of drivers, especially Uniphier and PFC"

* tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits)
  pinctrl: fix pincontrol definition for marvell
  pinctrl: xway: fix typo
  Revert "pinctrl: amd: make it explicitly non-modular"
  pinctrl: iproc: Add NSP and Stingray GPIO support
  pinctrl: Update iProc GPIO DT bindings
  pinctrl: bcm: add OF dependencies
  pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe()
  pinctrl: Add STM32F746 MCU support
  pinctrl: intel: Protect set wake flow by spin lock
  pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe()
  pinctrl: uniphier: add Ethernet pin-mux settings
  sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code
  pinctrl: ns2: fix return value check in ns2_pinmux_probe()
  pinctrl: qcom: update DT bindings with ebi2 groups
  pinctrl: qcom: establish proper EBI2 pin groups
  pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro
  Documentation: dt: Add new compatible to STM32 pinctrl driver bindings
  includes: dt-bindings: Add STM32F746 pinctrl DT bindings
  pinctrl: sunxi: fix nand0 function name for sun8i
  pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11
  ...

pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro

2016-07-06T13:41:31+00:00

Commit e2756baa4217 ("pinctrl: imx21: make it explicitly non-modular")
missed the removal of the MODULE_DEVICE_TABLE() macro causing the
following build error:

drivers/pinctrl/freescale/pinctrl-imx21.c:328:1: error: data definition has no type or storage class [-Werror]
 MODULE_DEVICE_TABLE(of, imx21_pinctrl_of_match);

,so remove the macro to fix this problem.

Reported-by: Arnd Bergmann 
Signed-off-by: Fabio Estevam 
Acked-by: Arnd Bergmann 
Signed-off-by: Linus Walleij

pinctrl: remove orphaned exported ".remove" function

2016-06-29T07:56:28+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_MXS
drivers/pinctrl/freescale/Kconfig:	bool

...meaning that it currently is not being built as a module by anyone.

It also doesn't have any modular functionality, so it doesn't need
module.h included at all.

What it does have is an exported function that was used as a shared
".remove" by other drivers, but those use cases (imx23 and imx28)
are now gone, and hence this can disappear as well.

Cc: Linus Walleij 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij

pinctrl: imx28: make it explicitly non-modular

2016-06-29T07:55:30+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX28
drivers/pinctrl/freescale/Kconfig:	bool

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_init was not in use by this driver, the init ordering
remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Linus Walleij 
Cc: Shawn Guo 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij

pinctrl: imx23: make it explicitly non-modular

2016-06-29T07:54:37+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX23
drivers/pinctrl/freescale/Kconfig:	bool

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_init wasn't actually used by this driver, the init
ordering remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Linus Walleij 
Cc: Shawn Guo 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij

pinctrl: vf610: make it explicitly non-modular

2016-06-29T07:53:48+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_VF610
drivers/pinctrl/freescale/Kconfig:	bool "Freescale Vybrid VF610 pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init wasn't in use by this driver, the init ordering
remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Linus Walleij 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij

pinctrl: imx7d: make it explicitly non-modular

2016-06-29T07:52:59+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX7D
drivers/pinctrl/freescale/Kconfig:	bool "IMX7D pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not in use by this driver, the init ordering
remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Linus Walleij 
Cc: Anson Huang 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij

pinctrl: imx6ul: make it explicitly non-modular

2016-06-29T07:52:01+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6UL
drivers/pinctrl/freescale/Kconfig:	bool "IMX6UL pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not in use by this driver, the init ordering
remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Linus Walleij 
Cc: Anson Huang 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij

pinctrl: imx6sx: make it explicitly non-modular

2016-06-29T07:51:08+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6SX
drivers/pinctrl/freescale/Kconfig:	bool "IMX6SX pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not in use by this driver, the init ordering
remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Linus Walleij 
Cc: Anson Huang 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij

pinctrl: imx6sl: make it explicitly non-modular

2016-06-29T07:50:10+00:00

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6SL
drivers/pinctrl/freescale/Kconfig:	bool "IMX6SL pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not in use by this driver, the init ordering
remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Linus Walleij 
Cc: Shawn Guo 
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Linus Walleij