linux-stable.git/drivers/pinctrl/core.c, branch linux-4.9.y Linux kernel stable tree pinctrl: Really force states during suspend/resume 2018-03-24T10:00:25+00:00 Florian Fainelli f.fainelli@gmail.com 2017-03-01T18:32:57+00:00 bd6552cfc5f7fce149a9bda2a5438a486db14831 [ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ] In case a platform only defaults a "default" set of pins, but not a "sleep" set of pins, and this particular platform suspends and resumes in a way that the pin states are not preserved by the hardware, when we resume, we would call pinctrl_single_resume() -> pinctrl_force_default() -> pinctrl_select_state() and the first thing we do is check that the pins state is the same as before, and do nothing. In order to fix this, decouple the actual state change from pinctrl_select_state() and move it pinctrl_commit_state(), while keeping the p->state == state check in pinctrl_select_state() not to change the caller assumptions. pinctrl_force_sleep() and pinctrl_force_default() are updated to bypass the state check by calling pinctrl_commit_state(). [Linus Walleij] The forced pin control states are currently only used in some pin controller drivers that grab their own reference to their own pins. This is equal to the pin control hogs: pins taken by pin control devices since there are no corresponding device in the Linux device hierarchy, such as memory controller lines or unused GPIO lines, or GPIO lines that are used orthogonally from the GPIO subsystem but pincontrol-wise managed as hogs (non-strict mode, allowing simultaneous use by GPIO and pin control). For this case forcing the state from the drivers' suspend()/resume() callbacks makes sense and should semantically match the name of the function. Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ]

In case a platform only defaults a "default" set of pins, but not a
"sleep" set of pins, and this particular platform suspends and resumes
in a way that the pin states are not preserved by the hardware, when we
resume, we would call pinctrl_single_resume() -> pinctrl_force_default()
-> pinctrl_select_state() and the first thing we do is check that the
pins state is the same as before, and do nothing.

In order to fix this, decouple the actual state change from
pinctrl_select_state() and move it pinctrl_commit_state(), while keeping
the p->state == state check in pinctrl_select_state() not to change the
caller assumptions. pinctrl_force_sleep() and pinctrl_force_default()
are updated to bypass the state check by calling pinctrl_commit_state().

[Linus Walleij]
The forced pin control states are currently only used in some pin
controller drivers that grab their own reference to their own pins.
This is equal to the pin control hogs: pins taken by pin control
devices since there are no corresponding device in the Linux device
hierarchy, such as memory controller lines or unused GPIO lines,
or GPIO lines that are used orthogonally from the GPIO subsystem
but pincontrol-wise managed as hogs (non-strict mode, allowing
simultaneous use by GPIO and pin control). For this case forcing
the state from the drivers' suspend()/resume() callbacks makes
sense and should semantically match the name of the function.

Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: copy per-pin driver private data to struct pin_desc 2016-05-31T08:27:19+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2016-05-25T05:09:31+00:00 cd8f61f1e52b33766639e28a042d717d1e069d4f Currently, struct pinctrl_pin_desc can have per-pin driver private data, but it is not copied to struct pin_desc. For a driver with sparse pin space, for-loop search like below would be necessary in order to get the driver-specific data for a desired pin number. for (i = 0; i < pctldev->desc->npins; i++) if (pin_number == pctldev->desc->pins[i].number) return pctldev->desc->pins[i].drv_data; This is not efficient for a driver with a large number of pins. So, copy the data to struct pin_desc when each pin is registered for the faster radix tree lookup. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Currently, struct pinctrl_pin_desc can have per-pin driver private
data, but it is not copied to struct pin_desc.

For a driver with sparse pin space, for-loop search like below would
be necessary in order to get the driver-specific data for a desired
pin number.

  for (i = 0; i < pctldev->desc->npins; i++)
          if (pin_number == pctldev->desc->pins[i].number)
                  return pctldev->desc->pins[i].drv_data;

This is not efficient for a driver with a large number of pins.
So, copy the data to struct pin_desc when each pin is registered
for the faster radix tree lookup.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: do not care about blank pin name 2016-05-31T08:19:56+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2016-05-24T05:26:26+00:00 cf9d994dcf00c09c73eb686e239ab6449a248719 If a pin name is not specified in struct pinctrl_pin_desc, pinctrl_register_one_pin() dynamically assigns its name. So, desc->name is always a valid pointer here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
If a pin name is not specified in struct pinctrl_pin_desc,
pinctrl_register_one_pin() dynamically assigns its name.
So, desc->name is always a valid pointer here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration 2016-04-21T07:23:27+00:00 Laxman Dewangan ldewangan@nvidia.com 2016-02-24T09:14:07+00:00 3024f920eb5f6e60453d035f26ec963c7126f517 Use devm_pinctrl_register() for pin control registration and remove the need of .remove callback. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Use devm_pinctrl_register() for pin control registration and
remove the need of .remove callback.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: Add devm_ apis for pinctrl_{register, unregister} 2016-04-20T22:01:21+00:00 Laxman Dewangan ldewangan@nvidia.com 2016-02-24T08:42:59+00:00 80e0f8d94d3090f0f7bf3faf3e6180e920ee0d22 Add device managed APIs devm_pinctrl_register() and devm_pinctrl_unregister() for the APIs pinctrl_register() and pinctrl_unregister(). This helps in reducing code in error path and sometimes removal of .remove callback for driver unbind. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add device managed APIs devm_pinctrl_register() and
devm_pinctrl_unregister() for the APIs pinctrl_register()
and pinctrl_unregister().

This helps in reducing code in error path and sometimes
removal of .remove callback for driver unbind.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: core: create nolock version of pinctrl_find_gpio_range_from_pin 2016-03-07T03:41:20+00:00 Joachim Eastwood manabian@gmail.com 2016-02-25T21:44:37+00:00 b18537cd8ec2e5280ba19d24ea8812b80e5b3208 pinctrl_find_gpio_range_from_pin takes the pctldev->mutex but so does pinconf_pins_show and this will cause a deadlock if pinctrl_find_gpio_range_from_pin is used in .pin_config_get callback. Create a nolock version of pinctrl_find_gpio_range_from_pin to allow pin to gpio lookup to be used from pinconf_pins_show. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
pinctrl_find_gpio_range_from_pin takes the pctldev->mutex but so
does pinconf_pins_show and this will cause a deadlock if
pinctrl_find_gpio_range_from_pin is used in .pin_config_get
callback.

Create a nolock version of pinctrl_find_gpio_range_from_pin to
allow pin to gpio lookup to be used from pinconf_pins_show.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl: Add the concept of an "init" state 2015-10-27T10:24:23+00:00 Douglas Anderson dianders@chromium.org 2015-10-21T04:15:06+00:00 ef0eebc05130b0d22b0ea65c0cd014ee16fc89c7 For pinctrl the "default" state is applied to pins before the driver's probe function is called. This is normally a sensible thing to do, but in some cases can cause problems. That's because the pins will change state before the driver is given a chance to program how those pins should behave. As an example you might have a regulator that is controlled by a PWM (output high = high voltage, output low = low voltage). The firmware might leave this pin as driven high. If we allow the driver core to reconfigure this pin as a PWM pin before the PWM's probe function runs then you might end up running at too low of a voltage while we probe. Let's introudce a new "init" state. If this is defined we'll set pinctrl to this state before probe and then "default" after probe (unless the driver explicitly changed states already). An alternative idea that was thought of was to use the pre-existing "sleep" or "idle" states and add a boolean property that we should start in that mode. This was not done because the "init" state is needed for correctness and those other states are only present (and only transitioned in to and out of) when (optional) power management is enabled. Changes in v3: - Moved declarations to pinctrl/devinfo.h - Fixed author/SoB Changes in v2: - Added comment to pinctrl_init_done() as per Linus W. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
For pinctrl the "default" state is applied to pins before the driver's
probe function is called.  This is normally a sensible thing to do,
but in some cases can cause problems.  That's because the pins will
change state before the driver is given a chance to program how those
pins should behave.

As an example you might have a regulator that is controlled by a PWM
(output high = high voltage, output low = low voltage).  The firmware
might leave this pin as driven high.  If we allow the driver core to
reconfigure this pin as a PWM pin before the PWM's probe function runs
then you might end up running at too low of a voltage while we probe.

Let's introudce a new "init" state.  If this is defined we'll set
pinctrl to this state before probe and then "default" after probe
(unless the driver explicitly changed states already).

An alternative idea that was thought of was to use the pre-existing
"sleep" or "idle" states and add a boolean property that we should
start in that mode.  This was not done because the "init" state is
needed for correctness and those other states are only present (and
only transitioned in to and out of) when (optional) power management
is enabled.

Changes in v3:
- Moved declarations to pinctrl/devinfo.h
- Fixed author/SoB

Changes in v2:
- Added comment to pinctrl_init_done() as per Linus W.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range() 2015-09-14T07:13:43+00:00 Tony Lindgren tony@atomide.com 2015-09-03T17:34:30+00:00 942cde724075f840ded89390b10dce1a47a4d712 If the gpio driver is confused about the numbers for gpio-ranges, pinctrl_ready_for_gpio_range() may get called with invalid GPIO causing a NULL pointer exception. Let's instead provide a warning that allows fixing the problem and return with error. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
If the gpio driver is confused about the numbers for gpio-ranges,
pinctrl_ready_for_gpio_range() may get called with invalid GPIO
causing a NULL pointer exception. Let's instead provide a warning
that allows fixing the problem and return with error.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: use dev_err() to show message in pinctrl_register_one_pin() 2015-07-27T12:43:43+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2015-07-21T06:25:26+00:00 2b38ca6d1aaf9149f1286c93b131f3e62c3ac63b Use dev_err() rather than pr_err() to display the error message. (Besides, dev_err() is already used 7 lines below in this function.) Also, drop the redundant information "on %s" because dev_err() shows which device the message is related to. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Use dev_err() rather than pr_err() to display the error message.
(Besides, dev_err() is already used 7 lines below in this function.)

Also, drop the redundant information "on %s" because dev_err() shows
which device the message is related to.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2015-06-25T02:21:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-25T02:21:02+00:00 93a4b1b9465d92e8be031b57166afa3d5611e142 Pull pin control updates from Linus Walleij: "Here is the bulk of pin control changes for the v4.2 series: Quite a lot of new SoC subdrivers and two new main drivers this time, apart from that business as usual. Details: Core functionality: - Enable exclusive pin ownership: it is possible to flag a pin controller so that GPIO and other functions cannot use a single pin simultaneously. New drivers: - NXP LPC18xx System Control Unit pin controller - Imagination Pistachio SoC pin controller New subdrivers: - Freescale i.MX7d SoC - Intel Sunrisepoint-H PCH - Renesas PFC R8A7793 - Renesas PFC R8A7794 - Mediatek MT6397, MT8127 - SiRF Atlas 7 - Allwinner A33 - Qualcomm MSM8660 - Marvell Armada 395 - Rockchip RK3368 Cleanups: - A big cleanup of the Marvell MVEBU driver rectifying it to correspond to reality - Drop platform device probing from the SH PFC driver, we are now a DT only shop for SuperH - Drop obsolte multi-platform check for SH PFC - Various janitorial: constification, grammar etc Improvements: - The AT91 GPIO portions now supports the set_multiple() feature - Split out SPI pins on the Xilinx Zynq - Support DTs without specific function nodes in the i.MX driver" * tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: rockchip: add support for the rk3368 pinctrl: rockchip: generalize perpin driver-strength setting pinctrl: sh-pfc: r8a7794: add SDHI pin groups pinctrl: sh-pfc: r8a7794: add MMCIF pin groups pinctrl: sh-pfc: add R8A7794 PFC support pinctrl: make pinctrl_register() return proper error code pinctrl: mvebu: armada-39x: add support for Armada 395 variant pinctrl: mvebu: armada-39x: add missing SATA functions pinctrl: mvebu: armada-39x: add missing PCIe functions pinctrl: mvebu: armada-38x: add ptp functions pinctrl: mvebu: armada-38x: add ua1 functions pinctrl: mvebu: armada-38x: add nand functions pinctrl: mvebu: armada-38x: add sata functions pinctrl: mvebu: armada-xp: add dram functions pinctrl: mvebu: armada-xp: add nand rb function pinctrl: mvebu: armada-xp: add spi1 function pinctrl: mvebu: armada-39x: normalize ref clock naming pinctrl: mvebu: armada-xp: rename spi to spi0 pinctrl: mvebu: armada-370: align spi1 clock pin naming pinctrl: mvebu: armada-370: align VDD cpu-pd pin naming with datasheet ... 
Pull pin control updates from Linus Walleij:
 "Here is the bulk of pin control changes for the v4.2 series: Quite a
  lot of new SoC subdrivers and two new main drivers this time, apart
  from that business as usual.

  Details:

  Core functionality:
   - Enable exclusive pin ownership: it is possible to flag a pin
     controller so that GPIO and other functions cannot use a single pin
     simultaneously.

  New drivers:
   - NXP LPC18xx System Control Unit pin controller
   - Imagination Pistachio SoC pin controller

  New subdrivers:
   - Freescale i.MX7d SoC
   - Intel Sunrisepoint-H PCH
   - Renesas PFC R8A7793
   - Renesas PFC R8A7794
   - Mediatek MT6397, MT8127
   - SiRF Atlas 7
   - Allwinner A33
   - Qualcomm MSM8660
   - Marvell Armada 395
   - Rockchip RK3368

  Cleanups:
   - A big cleanup of the Marvell MVEBU driver rectifying it to
     correspond to reality
   - Drop platform device probing from the SH PFC driver, we are now a
     DT only shop for SuperH
   - Drop obsolte multi-platform check for SH PFC
   - Various janitorial: constification, grammar etc

  Improvements:
   - The AT91 GPIO portions now supports the set_multiple() feature
   - Split out SPI pins on the Xilinx Zynq
   - Support DTs without specific function nodes in the i.MX driver"

* tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: rockchip: add support for the rk3368
  pinctrl: rockchip: generalize perpin driver-strength setting
  pinctrl: sh-pfc: r8a7794: add SDHI pin groups
  pinctrl: sh-pfc: r8a7794: add MMCIF pin groups
  pinctrl: sh-pfc: add R8A7794 PFC support
  pinctrl: make pinctrl_register() return proper error code
  pinctrl: mvebu: armada-39x: add support for Armada 395 variant
  pinctrl: mvebu: armada-39x: add missing SATA functions
  pinctrl: mvebu: armada-39x: add missing PCIe functions
  pinctrl: mvebu: armada-38x: add ptp functions
  pinctrl: mvebu: armada-38x: add ua1 functions
  pinctrl: mvebu: armada-38x: add nand functions
  pinctrl: mvebu: armada-38x: add sata functions
  pinctrl: mvebu: armada-xp: add dram functions
  pinctrl: mvebu: armada-xp: add nand rb function
  pinctrl: mvebu: armada-xp: add spi1 function
  pinctrl: mvebu: armada-39x: normalize ref clock naming
  pinctrl: mvebu: armada-xp: rename spi to spi0
  pinctrl: mvebu: armada-370: align spi1 clock pin naming
  pinctrl: mvebu: armada-370: align VDD cpu-pd pin naming with datasheet
  ...