linux-stable.git/drivers/pinctrl/bcm, branch v6.4 Linux kernel stable tree Merge tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2023-05-02T22:40:41+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-05-02T22:40:41+00:00 348551ddaf311c76b01cdcbaf61b6fef06a49144 Pull pin control updates from Linus Walleij: "Mostly drivers! Nothing special: some new Qualcomm chips as usual, and the new NXP S32 and nVidia BlueField-3. Core changes: - Make a lot of pin controllers with GPIO and irqchips immutable, i.e. not living structs, but const structs. This is driving a changed initiated by the irqchip maintainers. New drivers: - New driver for the NXP S32 SoC pin controller - As part of a thorough cleanup and restructuring of the Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were folded into the Mediatek directory and the family is renamed "mtmips". The Ralink chips live on as Mediatek MIPS family where new variants can be added. As part of this work also the device tree bindings were reworked. - New subdriver for the Qualcomm SM7150 SoC. - New subdriver for the Qualcomm IPQ9574 SoC. - New driver for the nVidia BlueField-3 SoC. - Support for the Qualcomm PMM8654AU mixed signal circuit GPIO. - Support for the Qualcomm PMI632 mixed signal circuit GPIO. Improvements: - Add some missing pins and generic cleanups on the Renesas r8a779g0 and r8a779g0 pin controllers. Generic Renesas extension for power source selection on several SoCs. - Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers - Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver. - Several device tree binding cleanups as the binding YAML syntax is solidifying" * tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits) pinctrl-bcm2835.c: fix race condition when setting gpio dir dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2" dt-bindings: pinctrl: qcom: Add few missing functions pinctrl: qcom: spmi-gpio: Add PMI632 support dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 pinctrl: wpcm450: select MFD_SYSCON pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip pinctrl: qcom spmi-mpp: Convert to immutable irq_chip pinctrl: plgpio: Convert to immutable irq_chip pinctrl: pistachio: Convert to immutable irq_chip pinctrl: pic32: Convert to immutable irq_chip pinctrl: sx150x: Convert to immutable irq_chip pinctrl: stmfx: Convert to immutable irq_chip pinctrl: st: Convert to immutable irq_chip pinctrl: mcp23s08: Convert to immutable irq_chip pinctrl: equilibrium: Convert to immutable irq_chip pinctrl: npcm7xx: Convert to immutable irq_chip pinctrl: armada-37xx: Convert to immutable irq_chip pinctrl: nsp: Convert to immutable irq_chip ... 
Pull pin control updates from Linus Walleij:
 "Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
  the new NXP S32 and nVidia BlueField-3.

  Core changes:

   - Make a lot of pin controllers with GPIO and irqchips immutable,
     i.e. not living structs, but const structs. This is driving a
     changed initiated by the irqchip maintainers.

  New drivers:

   - New driver for the NXP S32 SoC pin controller

   - As part of a thorough cleanup and restructuring of the
     Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
     folded into the Mediatek directory and the family is renamed
     "mtmips". The Ralink chips live on as Mediatek MIPS family where
     new variants can be added. As part of this work also the device
     tree bindings were reworked.

   - New subdriver for the Qualcomm SM7150 SoC.

   - New subdriver for the Qualcomm IPQ9574 SoC.

   - New driver for the nVidia BlueField-3 SoC.

   - Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.

   - Support for the Qualcomm PMI632 mixed signal circuit GPIO.

  Improvements:

   - Add some missing pins and generic cleanups on the Renesas r8a779g0
     and r8a779g0 pin controllers. Generic Renesas extension for power
     source selection on several SoCs.

   - Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers

   - Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.

   - Several device tree binding cleanups as the binding YAML syntax is
     solidifying"

* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
  pinctrl-bcm2835.c: fix race condition when setting gpio dir
  dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
  dt-bindings: pinctrl: qcom: Add few missing functions
  pinctrl: qcom: spmi-gpio: Add PMI632 support
  dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
  pinctrl: wpcm450: select MFD_SYSCON
  pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
  pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
  pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
  pinctrl: plgpio: Convert to immutable irq_chip
  pinctrl: pistachio: Convert to immutable irq_chip
  pinctrl: pic32: Convert to immutable irq_chip
  pinctrl: sx150x: Convert to immutable irq_chip
  pinctrl: stmfx: Convert to immutable irq_chip
  pinctrl: st: Convert to immutable irq_chip
  pinctrl: mcp23s08: Convert to immutable irq_chip
  pinctrl: equilibrium: Convert to immutable irq_chip
  pinctrl: npcm7xx: Convert to immutable irq_chip
  pinctrl: armada-37xx: Convert to immutable irq_chip
  pinctrl: nsp: Convert to immutable irq_chip
  ...
pinctrl-bcm2835.c: fix race condition when setting gpio dir 2023-04-21T09:00:34+00:00 Hans Verkuil hverkuil-cisco@xs4all.nl 2023-04-20T12:47:05+00:00 b7badd752de05312fdb1aeb388480f706d0c087f In the past setting the pin direction called pinctrl_gpio_direction() which uses a mutex to serialize this. That was changed to set the direction directly in the pin controller driver, but that lost the serialization mechanism. Since the direction of multiple pins are in the same register you can have a race condition, something that was in fact observed with the cec-gpio driver. Add a new spinlock to serialize writing to the FSEL registers. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 1a4541b68e25 ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()") Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
In the past setting the pin direction called pinctrl_gpio_direction()
which uses a mutex to serialize this. That was changed to set the
direction directly in the pin controller driver, but that lost the
serialization mechanism. Since the direction of multiple pins are in
the same register you can have a race condition, something that was
in fact observed with the cec-gpio driver.

Add a new spinlock to serialize writing to the FSEL registers.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 1a4541b68e25 ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()")
Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: nsp: Convert to immutable irq_chip 2023-04-14T09:08:17+00:00 Linus Walleij linus.walleij@linaro.org 2023-04-04T09:43:04+00:00 bb7e64e60e462c133a09e5674aa4c11ef888007d Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-2-503788a7f6e6@linaro.org 
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-2-503788a7f6e6@linaro.org
pinctrl: iproc: Convert to immutable irq_chip 2023-04-14T09:08:17+00:00 Linus Walleij linus.walleij@linaro.org 2023-04-04T09:43:03+00:00 2cc4485e60a760fa50e0180e93308aa0975c73dd Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-1-503788a7f6e6@linaro.org 
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-1-503788a7f6e6@linaro.org
pinctrl: bcm: ns: remove MODULE_LICENSE in non-modules 2023-04-13T20:13:51+00:00 Nick Alcock nick.alcock@oracle.com 2023-03-07T18:01:24+00:00 c7b9975a443167a0059e3d4d6582cd2634e7485d Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> 
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
pinctrl: bcm2835: Switch to use ->add_pin_ranges() 2023-01-26T12:38:55+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2023-01-13T21:53:51+00:00 bc96299707d925286d67212704dca45d73031c53 Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers, this one requires it to support quite old firmware descriptions that do not have gpio-ranges property. The change allows to clean up GPIO library from OF specifics. There is no functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers,
this one requires it to support quite old firmware descriptions that
do not have gpio-ranges property.

The change allows to clean up GPIO library from OF specifics.
There is no functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback() 2023-01-26T12:38:55+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2023-01-13T21:53:50+00:00 2d578dd27871372f7159dd3206149ec616700d87 Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(), there is no counterpart of_node_get() for it. Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(),
there is no counterpart of_node_get() for it.

Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm: Add missing header(s) 2022-10-24T09:53:33+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2022-10-07T13:44:44+00:00 eebefdd0b7796c4be5c87fa2ab51aca2568835b1 Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> 
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2022-10-11T17:59:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-10-11T17:59:59+00:00 979bb59016aed7c7c58baca2307d9d13890cc6ab Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ... 
Pull pin control updates from Linus Walleij:
 "There is nothing exciting going on, no core changes, just a few
  drivers and cleanups.

  New drivers:

   - Cypress CY8C95x0 chip pin control support, along with an immediate
     cleanup

   - Mediatek MT8188 SoC pin control support

   - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin
     control support

   - Qualcomm PM7250, PM8450

   - Rockchip RV1126 SoC pin control support

  Improvements:

   - Fix some missing pins in the Armada 37xx driver

   - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP()
     macro

   - Fix some GPIO irq_chips to be immutable

   - Massive Qualcomm device tree binding cleanup, with more to come"

* tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits)
  MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement
  pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"
  pinctrl: Create subdirectory for StarFive drivers
  dt-bindings: pinctrl: st,stm32: Document interrupt-controller property
  dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property
  dt-bindings: pinctrl: st,stm32: Document gpio-line-names
  pinctrl: st: stop abusing of_get_named_gpio()
  pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
  pinctrl: bcm: Remove unused struct bcm6328_pingroup
  pinctrl: qcom: restrict drivers per ARM/ARM64
  pinctrl: bcm: ns: Remove redundant dev_err call
  gpio: rockchip: request GPIO mux to pinctrl when setting direction
  pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
  pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops
  pinctrl: cy8c95x0: Drop atomicity on operations on push_pull
  pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()
  pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper
  pinctrl: stm32: Switch to use dev_err_probe() helper
  dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings
  pinctrl: qcom: spmi-gpio: Add compatible for PM7250B
  ...
pinctrl: bcm: Remove unused struct bcm6328_pingroup 2022-10-04T07:39:22+00:00 Yuan Can yuancan@huawei.com 2022-09-27T13:39:26+00:00 66db794ad54ce49d4fd564a16f682f257f608655 After commit 0e3db16300fb("pinctrl: bcm: Convert drivers to use struct pingroup and PINCTRL_PINGROUP()"), no one use struct bcm6328_pingroup, so remove it. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220927133926.103943-1-yuancan@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
After commit 0e3db16300fb("pinctrl: bcm: Convert drivers to use struct pingroup
and PINCTRL_PINGROUP()"), no one use struct bcm6328_pingroup, so remove it.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220927133926.103943-1-yuancan@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>