linux-stable.git/drivers/pinctrl/bcm, branch v5.3

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-07-13T22:02:27+00:00

Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.3 kernel cycle:

Core changes:

- Device links can optionally be added between a pin control producer
and its consumers. This will affect how the system power management
is handled: a pin controller will not suspend before all of its
consumers have been suspended.

This was necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense to make
this default in the long run.

Right now it is opt-in per driver.

- Drive strength can be specified in microamps. With decreases in
silicon technology, milliamps isn't granular enough, let's make it
possible to select drive strengths in microamps.

Right now the Meson (AMlogic) driver needs this.

New drivers:

- New subdriver for the Tegra 194 SoC.

- New subdriver for the Qualcomm SDM845.

- New subdriver for the Qualcomm SM8150.

- New subdriver for the Freescale i.MX8MN (Freescale is now a product
line of NXP).

- New subdriver for Marvell MV98DX1135.

Driver improvements:

- The Bitmain BM1880 driver now supports pin config in addition to
muxing.

- The Qualcomm drivers can now reserve some GPIOs as taken aside and
not usable for users. This is used in ACPI systems to take out some
GPIO lines used by the BIOS so that noone else (neither kernel nor
userspace) will play with them by mistake and crash the machine.

- A slew of refurbishing around the Aspeed drivers (board management
controllers for servers) in preparation for the new Aspeed AST2600
SoC.

- A slew of improvements over the SH PFC drivers as usual.

- Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
pinctrl: aspeed: Strip moved macros and structs from private header
pinctrl: aspeed: Fix missed include
pinctrl: baytrail: Use GENMASK() consistently
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
pinctrl: qcom: Add SM8150 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
dt-bindings: pinctrl: qcom: Document missing gpio nodes
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Correct comment that is no longer true
MAINTAINERS: Add entry for ASPEED pinctrl drivers
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Split bindings document in two
pinctrl: qcom: Add irq_enable callback for msm gpio
pinctrl: madera: Fixup SPDX headers
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
pinctrl: tegra: Add bitmask support for parked bits
...

pinctrl: ns2: Fix potential NULL dereference

2019-06-07T23:29:42+00:00

platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Reviewed-by: Ray Jui 
Signed-off-by: Linus Walleij

pinctrl: bcm2835: Fix build error without CONFIG_OF

2019-06-01T22:02:42+00:00

drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function bcm2835_pctl_dt_node_to_map:
drivers/pinctrl/bcm/pinctrl-bcm2835.c:720:8: error: implicit declaration of function pinconf_generic_dt_node_to_map_all;
drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function bcm2835_pinctrl_probe:
drivers/pinctrl/bcm/pinctrl-bcm2835.c:1022:15: error: struct gpio_chip has no member named of_node
  pc->gpio_chip.of_node = np;

Reported-by: Hulk Robot 
Fixes: 0de704955ee4 ("pinctrl: bcm2835: Add support for generic pinctrl binding")
Signed-off-by: YueHaibing 
Signed-off-by: Linus Walleij

pinctrl: bcm: Allow PINCTRL_BCM2835 for ARCH_BRCMSTB

2019-05-23T07:24:46+00:00

ARCH_BRCMSTB needs to use the BCM2835 pin controller for chips
like BCM7211 which adopted that pin controller for GPIO. This
commit makes the option menu configurable with default enabled
for ARCH_BRCMSTB and ARCH_BCM2835.

Signed-off-by: Doug Berger 
Signed-off-by: Florian Fainelli 
Reviewed-by: Eric Anholt 
Signed-off-by: Linus Walleij

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl

2019-02-08T12:13:01+00:00

In order to support GPIO config changes direct these to the generic pinctrl.
This also requires an adjust of the return code for unsupported parameter
otherwise gpiod_configure_flags wont work as expected.

Signed-off-by: Stefan Wahren 
Signed-off-by: Linus Walleij

pinctrl: bcm2835: declare pin config as generic

2019-02-08T12:12:12+00:00

Since commit 0de704955ee44 ("pinctrl: bcm2835: Add support for
generic pinctrl binding") this driver is capable to use the generic
interface. So declare this accordingly.

Signed-off-by: Stefan Wahren 
Signed-off-by: Linus Walleij

pinctrl: bcm: ns: support updated DT binding as syscon subnode

2018-12-21T10:45:49+00:00

Documentation has been recently updated specifying that pinctrl should
be subnode of the CRU "syscon". Support that by using parent node for
regmap and reading "offset" property from the DT.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Linus Walleij

pinctrl: bcm2835: Switch to SPDX identifier

2018-11-16T22:13:03+00:00

Adopt the SPDX license identifier headers to ease license compliance
management.

Cc: Simon Arlott 
Cc: Stephen Warren 
Signed-off-by: Stefan Wahren 
Reviewed-by: Eric Anholt 
Signed-off-by: Linus Walleij

pinctrl: bcm2835: Use define directive for BCM2835_PINCONF_PARAM_PULL

2018-11-09T09:22:28+00:00

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/bcm/pinctrl-bcm2835.c:707:40: warning: implicit
conversion from enumeration type 'enum bcm2835_pinconf_param' to
different enumeration type 'enum pin_config_param' [-Wenum-conversion]
        configs[0] = pinconf_to_config_packed(BCM2835_PINCONF_PARAM_PULL, pull);
                     ~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Signed-off-by: Nathan Chancellor 
Acked-by: Stefan Wahren 
Signed-off-by: Linus Walleij