linux-stable.git/drivers/pinctrl/bcm, branch v4.1 Linux kernel stable tree pinctrl: cygnus: fixed incorrect GPIO-pin mapping 2015-05-19T08:45:11+00:00 Ray Jui rjui@broadcom.com 2015-05-14T00:06:23+00:00 75e9143927a893aebad18b79e1bbeff4892c0d35 This patch fixes an incorrect GPIO-to-pin mapping in the Cygnus GPIO driver Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This patch fixes an incorrect GPIO-to-pin mapping in the Cygnus GPIO
driver

Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm2835: Fix support for threaded level triggered IRQs 2015-04-08T14:41:59+00:00 Charles Keepax ckeepax@opensource.wolfsonmicro.com 2015-04-07T10:43:45+00:00 b8a19382ac6212d18b21fcc7867060a5d54fe1a2 Currently, the driver uses handle_simple_irq for all IRQ types and hard codes the acknowledge for different IRQ types into the handler. It is better to use the IRQ core as intended and let it handle the differences between the various types of IRQ. For example the current system does not work for threaded level triggered IRQs as these need to be masked until the threaded handler has run. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Currently, the driver uses handle_simple_irq for all IRQ types and hard
codes the acknowledge for different IRQ types into the handler. It is
better to use the IRQ core as intended and let it handle the differences
between the various types of IRQ. For example the current system does
not work for threaded level triggered IRQs as these need to be masked
until the threaded handler has run.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: constify of_device_id array 2015-03-27T08:58:35+00:00 Fabian Frederick fabf@skynet.be 2015-03-16T19:59:09+00:00 baa9946e32f9f26e740721c1f972de87c095baa9 of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: cygnus: add gpio/pinconf driver 2015-03-18T01:02:19+00:00 Ray Jui rjui@broadcom.com 2015-03-09T20:45:00+00:00 b64333ce769cbcc6a4dbd0325d9b1da95c6929ff This adds the initial support of the Broadcom Cygnus GPIO/PINCONF driver that supports all 3 GPIO controllers on Cygnus including the ASIU GPIO controller, the chipCommonG GPIO controller, and the always-on GPIO controller. Basic PINCONF configurations such as bias pull up/down, and drive strength are also supported in this driver. Pins from the ASIU GPIO controller can be individually muxed to GPIO function, through interaction with the Cygnus IOMUX controller Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds the initial support of the Broadcom Cygnus GPIO/PINCONF driver
that supports all 3 GPIO controllers on Cygnus including the ASIU GPIO
controller, the chipCommonG GPIO controller, and the always-on GPIO
controller. Basic PINCONF configurations such as bias pull up/down, and
drive strength are also supported in this driver.

Pins from the ASIU GPIO controller can be individually muxed to GPIO
function, through interaction with the Cygnus IOMUX controller

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: cygnus: add initial IOMUX driver support 2015-03-18T01:02:13+00:00 Ray Jui rjui@broadcom.com 2015-03-05T00:35:51+00:00 cbd159ed4f9277e8989bd8f7513a3245562a6bee This adds the initial driver support for the Broadcom Cygnus IOMUX controller. The Cygnus IOMUX controller supports group based mux configuration but allows certain pins to be muxed to GPIO individually Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds the initial driver support for the Broadcom Cygnus IOMUX
controller. The Cygnus IOMUX controller supports group based mux
configuration but allows certain pins to be muxed to GPIO individually

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm: consolidate Broadcom pinctrl drivers 2015-03-18T01:02:12+00:00 Ray Jui rjui@broadcom.com 2015-03-05T00:35:49+00:00 b17f2f9b86f4d44b1d90abf5f1d8de423a74c772 Consolidate Broadcom pinctrl drivers into drivers/pinctrl/bcm/* Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Consolidate Broadcom pinctrl drivers into drivers/pinctrl/bcm/*

Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>