linux-stable.git/drivers/pinctrl/Makefile, branch v6.17 Linux kernel stable tree Merge tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2025-08-02T19:07:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-08-02T19:07:09+00:00 186f3edfdd41f2ae87fc40a9ccba52a3bf930994 Pull pin control updates from Linus Walleij: "Nothing stands out, apart from maybe the interesting Eswin EIC7700, a RISC-V SoC I've never seen before. Core changes: - Open code PINCTRL_FUNCTION_DESC() instead of defining a complex macro only used in one place - Add pinmux_generic_add_pinfunction() helper and use this in a few drivers New drivers: - Amlogic S7, S7D and S6 pin control support - Eswin EIC7700 pin control support - Qualcomm PMIV0104, PM7550 and Milos pin control support Because of unhelpful numbering schemes, the Qualcomm driver now needs to start to rely on SoC codenames - STM32 HDP pin control support - Mediatek MT8189 pin control support Improvements: - Switch remaining pin control drivers over to the new GPIO set callback that provides a return value - Support RSVD (reserved) pins in the STM32 driver - Move many fixed assignments over to pinctrl_desc definitions - Handle multiple TLMM regions in the Qualcomm driver" * tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits) pinctrl: mediatek: Add pinctrl driver for mt8189 dt-bindings: pinctrl: mediatek: Add support for mt8189 pinctrl: aspeed-g6: Add PCIe RC PERST pin group pinctrl: ingenic: use pinmux_generic_add_pinfunction() pinctrl: keembay: use pinmux_generic_add_pinfunction() pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction() pinctrl: airoha: use pinmux_generic_add_pinfunction() pinctrl: equilibrium: use pinmux_generic_add_pinfunction() pinctrl: provide pinmux_generic_add_pinfunction() pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC() pinctrl: ma35: use new GPIO line value setter callbacks MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer pinctrl: stm32: Introduce HDP driver dt-bindings: pinctrl: stm32: Introduce HDP pinctrl: qcom: Add Milos pinctrl driver dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer pinctrl: qcom: spmi: Add PM7550 dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support pinctrl: qcom: spmi: Add PMIV0104 dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support ... 
Pull pin control updates from Linus Walleij:
 "Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
  RISC-V SoC I've never seen before.

  Core changes:

   - Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
     macro only used in one place

   - Add pinmux_generic_add_pinfunction() helper and use this in a few
     drivers

  New drivers:

   - Amlogic S7, S7D and S6 pin control support

   - Eswin EIC7700 pin control support

   - Qualcomm PMIV0104, PM7550 and Milos pin control support

     Because of unhelpful numbering schemes, the Qualcomm driver now
     needs to start to rely on SoC codenames

   - STM32 HDP pin control support

   - Mediatek MT8189 pin control support

  Improvements:

   - Switch remaining pin control drivers over to the new GPIO set
     callback that provides a return value

   - Support RSVD (reserved) pins in the STM32 driver

   - Move many fixed assignments over to pinctrl_desc definitions

   - Handle multiple TLMM regions in the Qualcomm driver"

* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
  pinctrl: mediatek: Add pinctrl driver for mt8189
  dt-bindings: pinctrl: mediatek: Add support for mt8189
  pinctrl: aspeed-g6: Add PCIe RC PERST pin group
  pinctrl: ingenic: use pinmux_generic_add_pinfunction()
  pinctrl: keembay: use pinmux_generic_add_pinfunction()
  pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
  pinctrl: airoha: use pinmux_generic_add_pinfunction()
  pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
  pinctrl: provide pinmux_generic_add_pinfunction()
  pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
  pinctrl: ma35: use new GPIO line value setter callbacks
  MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
  pinctrl: stm32: Introduce HDP driver
  dt-bindings: pinctrl: stm32: Introduce HDP
  pinctrl: qcom: Add Milos pinctrl driver
  dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
  pinctrl: qcom: spmi: Add PM7550
  dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
  pinctrl: qcom: spmi: Add PMIV0104
  dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
  ...
pinctrl: eswin: Add EIC7700 pinctrl driver 2025-06-18T12:02:39+00:00 Yulin Lu luyulin@eswincomputing.com 2025-06-12T10:51:59+00:00 5b797bcc00ef6ac2d274406db7f6959c25af15e8 Add support for the pin controller in ESWIN's EIC7700 SoC, which supports pin multiplexing, pin configuration, and rgmii voltage control. Co-developed-by: Samuel Holland <samuel.holland@sifive.com> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Signed-off-by: Yulin Lu <luyulin@eswincomputing.com> Link: https://lore.kernel.org/20250612105159.1241-1-luyulin@eswincomputing.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add support for the pin controller in ESWIN's EIC7700 SoC,
which supports pin multiplexing, pin configuration,
and rgmii voltage control.

Co-developed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Link: https://lore.kernel.org/20250612105159.1241-1-luyulin@eswincomputing.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: starfive: Allow compile testing on other platforms 2025-06-18T11:26:35+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-06-11T06:13:33+00:00 9b369669452f500fc7334aad62bd8c96a075245f Always descent to drivers/pinctrl/starfive/ because limiting it with SOC_STARFIVE is redundant since its Makefile doesn't build anything if no Starfive-specific pin control Kconfig options are enabled. This allows compile testing on other architectures with allyesconfig. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Acked-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-1-b11c1d650384@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Always descent to drivers/pinctrl/starfive/ because limiting it with
SOC_STARFIVE is redundant since its Makefile doesn't build anything if
no Starfive-specific pin control Kconfig options are enabled.  This
allows compile testing on other architectures with allyesconfig.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Acked-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-1-b11c1d650384@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: rp1: Implement RaspberryPi RP1 gpio support 2025-06-16T18:50:34+00:00 Andrea della Porta andrea.porta@suse.com 2025-05-29T13:50:42+00:00 4732f079cd19f313516047726d934fabc58e9119 The RP1 is an MFD supporting a gpio controller and /pinmux/pinctrl. Add minimum support for the gpio only portion. The driver is in pinctrl folder since upcoming patches will add the pinmux/pinctrl support where the gpio part can be seen as an addition. Signed-off-by: Andrea della Porta <andrea.porta@suse.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250529135052.28398-5-andrea.porta@suse.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> 
The RP1 is an MFD supporting a gpio controller and /pinmux/pinctrl.
Add minimum support for the gpio only portion. The driver is in
pinctrl folder since upcoming patches will add the pinmux/pinctrl
support where the gpio part can be seen as an addition.

Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250529135052.28398-5-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
pinctrl: amd: isp411: Add amdisp GPIO pinctrl 2025-03-05T07:47:43+00:00 Pratap Nirujogi pratap.nirujogi@amd.com 2025-03-04T23:20:31+00:00 e97435ab09f3ad7b6a588dd7c4e45a96699bbb4a Add pinctrl driver support for AMD SoC with isp41 hw ip block. Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Link: https://lore.kernel.org/20250304232051.2936557-1-pratap.nirujogi@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add pinctrl driver support for AMD SoC with isp41 hw ip block.

Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Link: https://lore.kernel.org/20250304232051.2936557-1-pratap.nirujogi@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: spacemit: add support for SpacemiT K1 SoC 2024-10-19T18:15:12+00:00 Yixun Lan dlan@gentoo.org 2024-10-16T00:59:42+00:00 a83c29e1d145cca5240952100acd1cd60f25fb5f SpacemiT's K1 SoC has a pinctrl controller which use single register to describe all functions, which include bias pull up/down(strong pull), drive strength, schmitter trigger, slew rate, mux mode. Signed-off-by: Yixun Lan <dlan@gentoo.org> Link: https://lore.kernel.org/20241016-02-k1-pinctrl-v5-2-03d395222e4f@gentoo.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
SpacemiT's K1 SoC has a pinctrl controller which use single register
to describe all functions, which include bias pull up/down(strong pull),
drive strength, schmitter trigger, slew rate, mux mode.

Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20241016-02-k1-pinctrl-v5-2-03d395222e4f@gentoo.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: canaan: Add support for k230 SoC 2024-10-01T12:23:46+00:00 Ze Huang 18771902331@163.com 2024-09-26T15:57:44+00:00 545887eab6f6776a7477fe7e83860eab57138b03 Configuration of the K230 is similar to that of the K210. However, in K210, the 256 functions for each pin are shared, whereas in K230, multiplex functions are different for every pin. `drv_data` of `pinctrl_pin_desc` is pointing to currently activated group, which is used to print the name of current function of pin in `pin_dbg_show` and will be updated in `set_mux`, so they are not set const. Signed-off-by: Ze Huang <18771902331@163.com> Link: https://lore.kernel.org/20240926-k230-pinctrl-v2-2-a9a36fba4b34@163.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Configuration of the K230 is similar to that of the K210. However, in
K210, the 256 functions for each pin are shared, whereas in K230,
multiplex functions are different for every pin.

`drv_data` of `pinctrl_pin_desc` is pointing to currently activated
group, which is used to print the name of current function of pin in
`pin_dbg_show` and will be updated in `set_mux`, so they are not set
const.

Signed-off-by: Ze Huang <18771902331@163.com>
Link: https://lore.kernel.org/20240926-k230-pinctrl-v2-2-a9a36fba4b34@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: Add driver for the T-Head TH1520 SoC 2024-10-01T12:04:51+00:00 Emil Renner Berthing emil.renner.berthing@canonical.com 2024-09-30T19:50:52+00:00 bed5cd6f8a988389e987bcf5c1762ab7c53be317 Add pinctrl driver for the T-Head TH1520 RISC-V SoC. Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> [dfustini: use thead,pad-group to identify the pin controller instance] Signed-off-by: Drew Fustini <dfustini@tenstorrent.com> Link: https://lore.kernel.org/20240930-th1520-pinctrl-v3-2-32cea2bdbecb@tenstorrent.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add pinctrl driver for the T-Head TH1520 RISC-V SoC.

Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[dfustini: use thead,pad-group to identify the pin controller instance]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20240930-th1520-pinctrl-v3-2-32cea2bdbecb@tenstorrent.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2024-09-26T19:00:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-09-26T19:00:25+00:00 075dbe9f6e3c21596c5245826a4ee1f1c1676eb8 Pull SoC update from Arnd Bergmann: "Convert ep93xx to devicetree This concludes a long journey towards replacing the old board files with devictree description on the Cirrus Logic EP93xx platform. Nikita Shubin has been working on this for a long time, for details see the last post on https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/" * tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config net: cirrus: use u8 for addr to calm down sparse dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0 dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe() pinctrl: ep93xx: Fix raster pins typo spi: ep93xx: update kerneldoc comments for ep93xx_spi clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate() clk: ep93xx: add module license dmaengine: cirrus: remove platform code ASoC: cirrus: edb93xx: Delete driver ARM: ep93xx: soc: drop defines ARM: ep93xx: delete all boardfiles ata: pata_ep93xx: remove legacy pinctrl use pwm: ep93xx: drop legacy pinctrl ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms ARM: dts: ep93xx: Add EDB9302 DT ARM: dts: ep93xx: add ts7250 board ARM: dts: add Cirrus EP93XX SoC .dtsi ... 
Pull SoC update from Arnd Bergmann:
 "Convert ep93xx to devicetree

  This concludes a long journey towards replacing the old board files
  with devictree description on the Cirrus Logic EP93xx platform.

  Nikita Shubin has been working on this for a long time, for details
  see the last post on

    https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"

* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
  MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
  soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
  net: cirrus: use u8 for addr to calm down sparse
  dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
  dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
  pinctrl: ep93xx: Fix raster pins typo
  spi: ep93xx: update kerneldoc comments for ep93xx_spi
  clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
  clk: ep93xx: add module license
  dmaengine: cirrus: remove platform code
  ASoC: cirrus: edb93xx: Delete driver
  ARM: ep93xx: soc: drop defines
  ARM: ep93xx: delete all boardfiles
  ata: pata_ep93xx: remove legacy pinctrl use
  pwm: ep93xx: drop legacy pinctrl
  ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
  ARM: dts: ep93xx: Add EDB9302 DT
  ARM: dts: ep93xx: add ts7250 board
  ARM: dts: add Cirrus EP93XX SoC .dtsi
  ...
pinctrl: add a Cirrus ep93xx SoC pin controller 2024-09-12T14:33:10+00:00 Nikita Shubin nikita.shubin@maquefel.me 2024-09-09T08:10:29+00:00 035f90076fd1cafb17468a2dcef7aad189190980 Add a pin control (only multiplexing) driver for ep93xx SoC so we can fully convert ep93xx to device tree. This driver is capable of muxing ep9301/ep9302/ep9307/ep9312/ep9315 variants, this is chosen based on "compatible" in device tree. Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Add a pin control (only multiplexing) driver for ep93xx SoC so
we can fully convert ep93xx to device tree.

This driver is capable of muxing ep9301/ep9302/ep9307/ep9312/ep9315
variants, this is chosen based on "compatible" in device tree.

Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>