linux-stable.git/drivers/pinctrl/Makefile, branch v3.16.2 Linux kernel stable tree pinctrl: add pinctrl driver for imx6sx 2014-05-27T09:24:28+00:00 Anson Huang b20788@freescale.com 2014-05-12T15:10:35+00:00 2cc140fe360732bc5467df3ad932685c76078dd4 Add a pinctrl driver for i.MX6 SoloX based on pinctrl-imx core driver. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add a pinctrl driver for i.MX6 SoloX based on pinctrl-imx core
driver.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs 2014-05-22T22:05:00+00:00 Antoine Tenart antoine.tenart@free-electrons.com 2014-05-19T17:36:29+00:00 3de68d331c24e8136da147801c2d090c3038eb32 The Marvell Berlin boards have a group based pinmuxing mechanism. This adds the core driver support. We actually do not need any information about the pins here and only have the definition of the groups. Let's take the example of the uart0 pinmuxing on the BG2Q. Balls BK4 and BH6 are muxed to respectively UART0 RX and TX if the group GSM12 is set to mode 0: Group Modes Offset Base Offset LSB Bit Width GSM12 3 sm_base 0x40 0x10 0x2 Ball Group Mode 0 Mode 1 Mode 2 BK4 GSM12 UART0_RX IrDA0_RX GPIO9 BH6 GSM12 UART0_TX IrDA0_TX GPIO10 So in order to configure BK4 -> UART0_TX and BH6 -> UART0_RX, we need to set (sm_base + 0x40 + 0x10) &= ff3fffff. As pin control registers are part of either chip control or system control registers, that deal with a bunch of other functions we rely on a regmap instead of exclusively remapping any resources. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The Marvell Berlin boards have a group based pinmuxing mechanism. This
adds the core driver support. We actually do not need any information
about the pins here and only have the definition of the groups.

Let's take the example of the uart0 pinmuxing on the BG2Q. Balls BK4 and
BH6 are muxed to respectively UART0 RX and TX if the group GSM12 is set
to mode 0:

Group	Modes	Offset Base	Offset	LSB	Bit Width
GSM12	3	sm_base		0x40	0x10	0x2

Ball	Group	Mode 0		Mode 1		Mode 2
BK4	GSM12	UART0_RX	IrDA0_RX	GPIO9
BH6	GSM12	UART0_TX	IrDA0_TX	GPIO10

So in order to configure BK4 -> UART0_TX and BH6 -> UART0_RX, we need
to set (sm_base + 0x40 + 0x10) &= ff3fffff.

As pin control registers are part of either chip control or system
control registers, that deal with a bunch of other functions we rely
on a regmap instead of exclusively remapping any resources.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sunxi: Move the Allwinner pinctrl driver to its own directory 2014-05-04T06:59:43+00:00 Maxime Ripard maxime.ripard@free-electrons.com 2014-04-18T16:53:02+00:00 5f9107774fc81eb7a33ac7a2c296523ce5fbb14a This will allow to create numerous files without crippling the main pinctrl directory. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 
This will allow to create numerous files without crippling the main pinctrl
directory.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
pinctrl: qcom: Add definitions for IPQ8064 2014-04-23T13:59:58+00:00 Andy Gross agross@codeaurora.org 2014-04-15T03:10:35+00:00 b4da6573e7e2f8bd54abdb3e78a7b1d61c34d6f3 This adds pinctrl definitions for the GPIO pins of the TLMM v2 block in the Qualcomm IPQ8064 platform. Signed-off-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds pinctrl definitions for the GPIO pins of the TLMM v2 block in the
Qualcomm IPQ8064 platform.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: msm: Add definitions for the APQ8064 platform 2014-04-22T06:41:35+00:00 Bjorn Andersson bjorn.andersson@sonymobile.com 2014-03-31T21:49:57+00:00 e2c802be589bf262fe8f1bd83a79111bd3873972 This adds pinctrl definitions for the GPIO pins of the TLMM v2 block in the Qualcomm APQ8064 platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds pinctrl definitions for the GPIO pins of the TLMM v2 block in the
Qualcomm APQ8064 platform.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: Rename Broadcom Capri pinctrl driver 2014-04-14T07:39:33+00:00 Sherman Yin syin@broadcom.com 2014-04-02T22:40:37+00:00 7418b5cc81185e4ae1fec66156c464eb0b8d8f5a To be consistent with other Broadcom drivers, the Broadcom Capri pinctrl driver and its related CONFIG option are renamed to bcm281xx. Devicetree compatible string and binding documentation use "brcm,bcm11351-pinctrl" to match the machine binding here: Documentation/devicetree/bindings/arm/bcm/bcm11351.txt This driver supports pinctrl on BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 SoCs. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
To be consistent with other Broadcom drivers, the Broadcom Capri pinctrl
driver and its related CONFIG option are renamed to bcm281xx.

Devicetree compatible string and binding documentation use
"brcm,bcm11351-pinctrl" to match the machine binding here:
Documentation/devicetree/bindings/arm/bcm/bcm11351.txt

This driver supports pinctrl on BCM11130, BCM11140, BCM11351, BCM28145
and BCM28155 SoCs.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Matt Porter <mporter@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ARM: pinctrl: Add Broadcom Capri pinctrl driver 2014-01-16T13:25:38+00:00 Sherman Yin syin@broadcom.com 2013-12-21T02:13:35+00:00 54b1aa5a5b166f3e0863adde6cf9d14442fa244c Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs. v4: - PINCTRL selected in Kconfig, PINCTRL_CAPRI selected in bcm_defconfig - make use of regmap - change CAPRI_PIN_UPDATE from macro to inline function. - Handle pull-up strength arg in Ohm instead of enum v3: Re-work driver to be based on generic pin config. Moved config selection from Kconfig to bcm_defconfig. v2: Use hyphens instead of underscore in DT property names. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs.

v4: - PINCTRL selected in Kconfig, PINCTRL_CAPRI selected in bcm_defconfig
    - make use of regmap
    - change CAPRI_PIN_UPDATE from macro to inline function.
    - Handle pull-up strength arg in Ohm instead of enum
v3: Re-work driver to be based on generic pin config. Moved config selection
    from Kconfig to bcm_defconfig.
v2: Use hyphens instead of underscore in DT property names.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Christian Daudt <bcm@fixthebug.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: tegra: add pinmux controller driver for Tegra124 2013-12-12T21:28:06+00:00 Ashwini Ghuge aghuge@nvidia.com 2013-12-10T07:10:56+00:00 1a16bee6bce39ca31724cf928dce19bd48d78df5 This adds a driver for the Tegra124 pinmux, and required parameterization data for Tegra124. The driver uses the common Tegra pincontrol driver utility functions to implement the majority of the driver. This driver is not compatible with the earlier NVIDIA's SoCs, hence add new compatibile as "nvidia,tegra124-pinmux". Originally written by Ashwini Gguhe. Thierry: - Cleanups in patches. ldewangan: - Fix some entries for groups. - Fix MUX enums and group sequence. Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> CC: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds a driver for the Tegra124 pinmux, and required
parameterization data for Tegra124.

The driver uses the common Tegra pincontrol driver utility
functions to implement the majority of the driver.

This driver is not compatible with the earlier NVIDIA's SoCs,
hence add new compatibile as "nvidia,tegra124-pinmux".

Originally written by Ashwini Gguhe.
Thierry:
 - Cleanups in patches.
ldewangan:
 - Fix some entries for groups.
 - Fix MUX enums and group sequence.

Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
CC: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: Add msm8x74 configuration 2013-12-06T13:58:34+00:00 Bjorn Andersson bjorn.andersson@sonymobile.com 2013-12-06T02:10:04+00:00 55aaf8342db44c1d0d8bb911c50774f6eaeefbf3 Add initial definition of parameters for pinctrl-msm for the msm8x74 platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add initial definition of parameters for pinctrl-msm for the msm8x74
platform.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: Add Qualcomm TLMM driver 2013-12-06T13:58:33+00:00 Bjorn Andersson bjorn.andersson@sonymobile.com 2013-12-06T02:10:03+00:00 f365be0925729508fd8e62f8bdb504ef896cb6e0 This adds a pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds a pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm TLMM block.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>