linux-stable.git/drivers/phy, branch v6.6.92 Linux kernel stable tree phy: tegra: xusb: remove a stray unlock 2025-05-22T12:12:26+00:00 Dan Carpenter dan.carpenter@linaro.org 2025-04-23T13:08:23+00:00 c1d42a239be5c238b7b169a0d84566854a43c2a7 commit 83c178470e0bf690d34c8c08440f2421b82e881c upstream. We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we have moved the lock into the caller. Unfortunately, when we moved the lock this unlock was left behind and it results in a double unlock. Delete it now. Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83c178470e0bf690d34c8c08440f2421b82e881c upstream.

We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we
have moved the lock into the caller.  Unfortunately, when we moved the
lock this unlock was left behind and it results in a double unlock.
Delete it now.

Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: renesas: rcar-gen3-usb2: Set timing registers only once 2025-05-22T12:12:22+00:00 Claudiu Beznea claudiu.beznea.uj@bp.renesas.com 2025-05-07T12:50:32+00:00 a1546ec7e049888db0cb708345313fee7e6971a8 commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream. phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream.

phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common
to all PHYs. There is no need to set them every time a PHY is initialized.
Set timing register only when the 1st PHY is initialized.

Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind 2025-05-22T12:12:22+00:00 Claudiu Beznea claudiu.beznea.uj@bp.renesas.com 2025-05-07T12:50:28+00:00 99fc6f1c371e8e70196b2cf0c7e0710ba16e23f9 commit 54c4c58713aaff76c2422ff5750e557ab3b100d7 upstream. It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 54c4c58713aaff76c2422ff5750e557ab3b100d7 upstream.

It has been observed on the Renesas RZ/G3S SoC that unbinding and binding
the PHY driver leads to role autodetection failures. This issue occurs when
PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt
associated with the USB2_INT_ENABLE register (as
rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called
to initialize OTG without enabling PHY interrupts.

To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in
role_store(), role_show(), and rcar_gen3_init_otg(). At the same time,
rcar_gen3_init_otg() is only called when initialization for a PHY with
interrupt bits is in progress. As a result, the
struct rcar_gen3_phy::otg_initialized is no longer needed.

Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: Fix error handling in tegra_xusb_port_init 2025-05-22T12:12:22+00:00 Ma Ke make24@iscas.ac.cn 2025-03-03T07:27:39+00:00 2b169aa46f97080ae87cbd3a4b99c7b127901d2a commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream. If device_add() fails, do not use device_unregister() for error handling. device_unregister() consists two functions: device_del() and put_device(). device_unregister() should only be called after device_add() succeeded because device_del() undoes what device_add() does if successful. Change device_unregister() to put_device() call before returning from the function. As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable@vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream.

If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.

As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking 2025-05-22T12:12:21+00:00 Wayne Chang waynec@nvidia.com 2025-04-08T03:09:05+00:00 ba25131b3c1ceec303839b2462586d7673788197 commit b47158fb42959c417ff2662075c0d46fb783d5d1 upstream. The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. The mutex used to prevent race conditions during UTMI pad enable/disable operations has been moved from the tegra186_utmi_bias_pad_power_on/off functions to the parent functions tegra186_utmi_pad_power_on/down. This change ensures that there are no race conditions when updating the bitmask. Cc: stable@vger.kernel.org Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls") Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250408030905.990474-1-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b47158fb42959c417ff2662075c0d46fb783d5d1 upstream.

The current implementation uses bias_pad_enable as a reference count to
manage the shared bias pad for all UTMI PHYs. However, during system
suspension with connected USB devices, multiple power-down requests for
the UTMI pad result in a mismatch in the reference count, which in turn
produces warnings such as:

[  237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170
[  237.763103] Call trace:
[  237.763104]  tegra186_utmi_pad_power_down+0x160/0x170
[  237.763107]  tegra186_utmi_phy_power_off+0x10/0x30
[  237.763110]  phy_power_off+0x48/0x100
[  237.763113]  tegra_xusb_enter_elpg+0x204/0x500
[  237.763119]  tegra_xusb_suspend+0x48/0x140
[  237.763122]  platform_pm_suspend+0x2c/0xb0
[  237.763125]  dpm_run_callback.isra.0+0x20/0xa0
[  237.763127]  __device_suspend+0x118/0x330
[  237.763129]  dpm_suspend+0x10c/0x1f0
[  237.763130]  dpm_suspend_start+0x88/0xb0
[  237.763132]  suspend_devices_and_enter+0x120/0x500
[  237.763135]  pm_suspend+0x1ec/0x270

The root cause was traced back to the dynamic power-down changes
introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"),
where the UTMI pad was being powered down without verifying its current
state. This unbalanced behavior led to discrepancies in the reference
count.

To rectify this issue, this patch replaces the single reference counter
with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask
corresponds to one of the four USB2 PHYs, allowing us to track each pad's
enablement status individually.

With this change:
  - The bias pad is powered on only when the mask is clear.
  - Each UTMI pad is powered on or down based on its corresponding bit
    in the mask, preventing redundant operations.
  - The overall power state of the shared bias pad is maintained
    correctly during suspend/resume cycles.

The mutex used to prevent race conditions during UTMI pad enable/disable
operations has been moved from the tegra186_utmi_bias_pad_power_on/off
functions to the parent functions tegra186_utmi_pad_power_on/down. This
change ensures that there are no race conditions when updating the bitmask.

Cc: stable@vger.kernel.org
Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls")
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250408030905.990474-1-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: freescale: imx8m-pcie: assert phy reset and perst in power off 2025-04-25T08:45:36+00:00 Stefan Eichenberger stefan.eichenberger@toradex.com 2025-03-05T14:43:16+00:00 d118391566535d8e5d5c9e61e00bf928fe53eae7 commit aecb63e88c5e5fb9afb782a1577264c76f179af9 upstream. Ensure the PHY reset and perst is asserted during power-off to guarantee it is in a reset state upon repeated power-on calls. This resolves an issue where the PHY may not properly initialize during subsequent power-on cycles. Power-on will deassert the reset at the appropriate time after tuning the PHY parameters. During suspend/resume cycles, we observed that the PHY PLL failed to lock during resume when the CPU temperature increased from 65C to 75C. The observed errors were: phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110 imx6q-pcie 33800000.pcie: waiting for PHY ready timeout! imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110 imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110 This resulted in a complete CPU freeze, which is resolved by ensuring the PHY is in reset during power-on, thus preventing PHY PLL failures. Cc: stable@vger.kernel.org Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aecb63e88c5e5fb9afb782a1577264c76f179af9 upstream.

Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.

During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
  phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
  imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
  imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
  imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110

This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.

Cc: stable@vger.kernel.org
Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk 2025-03-07T15:45:47+00:00 Kaustabh Chakraborty kauschluss@disroot.org 2025-02-08T18:59:30+00:00 4bddfde8b692d6e07021607236efbc2c2e9f0d0d commit e2158c953c973adb49383ddea2504faf08d375b7 upstream. In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not inverted when applied to the register values. Fix it. Cc: stable@vger.kernel.org Fixes: 59025887fb08 ("phy: Add new Exynos5 USB 3.0 PHY driver") Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e2158c953c973adb49383ddea2504faf08d375b7 upstream.

In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks
PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not
inverted when applied to the register values. Fix it.

Cc: stable@vger.kernel.org
Fixes: 59025887fb08 ("phy: Add new Exynos5 USB 3.0 PHY driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: tegra: xusb: reset VBUS & ID OVERRIDE 2025-03-07T15:45:47+00:00 BH Hsieh bhsieh@nvidia.com 2025-01-22T10:59:43+00:00 9e728c1149f8735e233e6a009c44d7b614e8aa87 commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream. Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed with unexpected value prior to XUSB PADCTL driver, this could also occur in virtualization scenario. For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set a type-c port to host mode and keeps the value to kernel. If the type-c port is connected a usb host, below errors can be observed right after usb host mode driver gets probed. The errors would keep until usb role class driver detects the type-c port as device mode and notifies usb device mode driver to set both ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL driver. [ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 173.765837] usb usb3-port2: config error Taking virtualization into account, asserting XUSB PADCTL reset would break XUSB functions used by other guest OS, hence only reset VBUS & ID OVERRIDE of the port in utmi_phy_init. Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support") Cc: stable@vger.kernel.org Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591 Signed-off-by: BH Hsieh <bhsieh@nvidia.com> Signed-off-by: Henry Lin <henryl@nvidia.com> Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream.

Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.

For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.

[  173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[  173.765837] usb usb3-port2: config error

Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.

Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: rockchip: naneng-combphy: compatible reset with old DT 2025-03-07T15:45:43+00:00 Chukun Pan amadeus@jmu.edu.cn 2025-01-06T10:00:01+00:00 57b243058dc28525b989225de4ba53c440a46c72 [ Upstream commit 3126ea9be66b53e607f87f067641ba724be24181 ] The device tree of RK3568 did not specify reset-names before. So add fallback to old behaviour to be compatible with old DT. Fixes: fbcbffbac994 ("phy: rockchip: naneng-combphy: fix phy reset") Cc: Jianfeng Liu <liujianfeng1994@gmail.com> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250106100001.1344418-2-amadeus@jmu.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3126ea9be66b53e607f87f067641ba724be24181 ]

The device tree of RK3568 did not specify reset-names before.
So add fallback to old behaviour to be compatible with old DT.

Fixes: fbcbffbac994 ("phy: rockchip: naneng-combphy: fix phy reset")
Cc: Jianfeng Liu <liujianfeng1994@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250106100001.1344418-2-amadeus@jmu.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip: naneng-combphy: fix phy reset 2025-01-02T09:32:02+00:00 Chukun Pan amadeus@jmu.edu.cn 2024-11-22T07:30:06+00:00 908806a2e789998f8897ebab83be10b4b058b6e2 commit fbcbffbac994aca1264e3c14da96ac9bfd90466e upstream. Currently, the USB port via combophy on the RK3528/RK3588 SoC is broken. usb usb8-port1: Cannot enable. Maybe the USB cable is bad? This is due to the combphy of RK3528/RK3588 SoC has multiple resets, but only "phy resets" need assert and deassert, "apb resets" don't need. So change the driver to only match the phy resets, which is also what the vendor kernel does. Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568") Cc: FUKAUMI Naoki <naoki@radxa.com> Cc: Michael Zimmermann <sigmaepsilon92@gmail.com> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20241122073006.99309-2-amadeus@jmu.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fbcbffbac994aca1264e3c14da96ac9bfd90466e upstream.

Currently, the USB port via combophy on the RK3528/RK3588 SoC is broken.

  usb usb8-port1: Cannot enable. Maybe the USB cable is bad?

This is due to the combphy of RK3528/RK3588 SoC has multiple resets, but
only "phy resets" need assert and deassert, "apb resets" don't need.
So change the driver to only match the phy resets, which is also what
the vendor kernel does.

Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568")
Cc: FUKAUMI Naoki <naoki@radxa.com>
Cc: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20241122073006.99309-2-amadeus@jmu.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>