linux-stable.git/drivers/phy, branch v6.2.7

phy: rockchip-typec: Fix unsigned comparison with less than zero

2023-03-11T12:50:46+00:00

[ Upstream commit f765c59c5a72546a2d74a92ae5d0eb0329d8e247 ]

The dp and ufp are defined as bool type, the return value type of
function extcon_get_state should be int, so the type of dp and ufp
are modified to int.

./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0.

Reported-by: Abaci Robot 
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962
Signed-off-by: Jiapeng Chong 
Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: rockchip-typec: fix tcphy_get_mode error case

2023-03-10T08:28:56+00:00

[ Upstream commit 4ca651df07183e29cdad7272255e23aec0169a1b ]

The existing logic in tcphy_get_mode() can cause the phy to be
incorrectly configured to USB UFP or DisplayPort mode when
extcon_get_state returns an error code.

extcon_get_state() can return 0, 1, or a negative error code.

It is possible to get into the failing state with an extcon driver
which does not support the extcon connector id specified as the
second argument to extcon_get_state().

tcphy_get_mode()
->extcon_get_state()
-->find_cable_index_by_id()
--->return -EINVAL;

Fixes: e96be45cb84e ("phy: Add USB Type-C PHY driver for rk3399")
Signed-off-by: Neill Kapron 
Reviewed-by: Lee Jones 
Link: https://lore.kernel.org/r/20230126001013.3707873-1-nkapron@google.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: mediatek: remove temporary variable @mask_

2023-03-10T08:28:53+00:00

[ Upstream commit 49094d928618309877c50e589f23e639a3b0c453 ]

Remove the temporary @mask_, this may cause build warning when use clang
compiler for powerpc, but can't reproduce it when compile for arm64.
the build warning is caused by:

"warning: result of comparison of constant 18446744073709551615 with
expression of type (aka 'unsigned long') is always false
[-Wtautological-constant-out-of-range-compare]"

More information provided in below lore link.

After removing @mask_, there is a "CHECK:MACRO_ARG_REUSE" when run
checkpatch.pl, but due to @mask is constant, no reuse problem will happen.

Link: https://lore.kernel.org/lkml/202212160357.jJuesD8n-lkp@intel.com/t/
Fixes: 84513eccd678 ("phy: mediatek: fix build warning of FIELD_PREP()")
Reported-by: kernel test robot 
Signed-off-by: Chunfeng Yun 
Reviewed-by: AngeloGioacchino Del Regno 
Link: https://lore.kernel.org/r/20230118084343.26913-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: phy-can-transceiver: Skip warning if no "max-bitrate"

2023-01-18T17:28:05+00:00

According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.

Fixes: a4a86d273ff1b6f7 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul

phy: freescale: imx8m-pcie: Add one missing error return

2023-01-13T17:55:38+00:00

There should be one error return when fail to fetch the perst reset.
Add the missing error return.

Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support")

Signed-off-by: Richard Zhu 
Reviewed-by: Marek Vasut 
Link: https://lore.kernel.org/r/1671433941-2037-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul

phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"

2023-01-13T17:45:42+00:00

This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156.

This commit introduced an init sequence from downstream DT [1] in the
driver.  As mentioned by the comment above the HSPHY_INIT_CFG macro for
this sequence:

    /*
     * The macro is used to define an initialization sequence.  Each tuple
     * is meant to program 'value' into phy register at 'offset' with 'delay'
     * in us followed.
     */

Instead of corresponding to offsets into the phy register, the sequence
read by the downstream driver [2] is passed into ulpi_write [3] which
crafts the address-value pair into a new value and writes it into the
same register at USB_ULPI_VIEWPORT [4].  In other words, this init
sequence is programmed into the hardware in a totally different way than
downstream and is unlikely to achieve the desired result, if the hsphy
is working at all.

An alternative method needs to be found to write these init values at
the desired location.  Fortunately mdm9607 did not land upstream yet [5]
and should have its compatible revised to use the generic one, instead
of a compatible that writes wrong data to the wrong registers.

[1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585
[2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183
[3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468
[4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418
[5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/

Reported-by: Michael Srba 
Signed-off-by: Marijn Suijten 
Reviewed-by: Stephan Gerhold 
Reviewed-by: Bryan O'Donoghue 
Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org
Signed-off-by: Vinod Koul

phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()

2023-01-13T17:40:52+00:00

The clk_disable_unprepare() should be called in the error handling of
rockchip_usb2phy_power_on().

Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy")
Signed-off-by: Shang XiaoJing 
Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul

phy: renesas: r8a779f0-eth-serdes: Fix register setting

2023-01-12T18:30:08+00:00

Fix register setting which is typo in r8a779f0_eth_serdes_chan_setting().

Fixes: 742859441d44 ("phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8")
Signed-off-by: Yoshihiro Shimoda 
Link: https://lore.kernel.org/r/20221226064216.3895421-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul

phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()

2023-01-12T18:13:35+00:00

sp_usb_phy_probe() will call platform_get_resource_byname() that may fail
and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as
input, which may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.

Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Shang XiaoJing 
Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul

phy: ti: fix Kconfig warning and operator precedence

2023-01-11T07:54:33+00:00

Fix Kconfig depends operator precedence to prevent a Kconfig warning:

WARNING: unmet direct dependencies detected for MUX_MMIO
  Depends on [n]: MULTIPLEXER [=m] && OF [=n]
  Selected by [m]:
  - PHY_AM654_SERDES [=m] && (OF [=n] && ARCH_K3 || COMPILE_TEST [=y]) && COMMON_CLK [=y]

Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Randy Dunlap 
Cc: Vinod Koul 
Cc: Kishon Vijay Abraham I 
Cc: linux-phy@lists.infradead.org
Cc: Arnd Bergmann 
Link: https://lore.kernel.org/r/20230110062529.22668-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul