linux-stable.git/drivers/phy, branch v5.4.258

phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write

2023-09-23T08:59:53+00:00

[ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ]

inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.

Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman 
Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate

2023-09-23T08:59:52+00:00

[ Upstream commit d5ef343c1d62bc4c4c2c393af654a41cb34b449f ]

inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.

Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Zheng Yang 
Signed-off-by: Jonas Karlman 
Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328

2023-09-23T08:59:52+00:00

[ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ]

inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro
when configuring vco_div_5 on RK3328.

Fix this by using correct vco_div_5 macro for RK3328.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman 
Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()

2023-08-11T09:53:47+00:00

[ Upstream commit 13c088cf3657d70893d75cf116be937f1509cc0f ]

The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM.

In the for loop, 'i' is used as the index for array 'priv->ports[]'
with a check (i > INNO_PHY_PORT_NUM) which indicates that
INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop.

This > comparison needs to be changed to >=, otherwise it potentially leads
to an out of bounds write on the next iteration through the loop

Fixes: ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC")
Reported-by: Dan Carpenter 
Signed-off-by: Harshit Mogalapalli 
Link: https://lore.kernel.org/r/20230721090558.3588613-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: st: miphy28lp: use _poll_timeout functions for waits

2023-05-30T11:44:04+00:00

[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ]

This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.

Signed-off-by: Alain Volmat 
Reviewed-by: Patrice Chotard 
Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port

2023-05-17T09:35:54+00:00

[ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ]

The tegra_xusb_port_unregister should be called when usb2_port
and ulpi_port map fails in tegra_xusb_add_usb2_port() or in
tegra_xusb_add_ulpi_port(), fix it.

Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Gaosheng Cui 
Acked-by: Thierry Reding 
Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: rockchip-typec: Fix unsigned comparison with less than zero

2023-03-11T15:44:15+00:00

[ Upstream commit f765c59c5a72546a2d74a92ae5d0eb0329d8e247 ]

The dp and ufp are defined as bool type, the return value type of
function extcon_get_state should be int, so the type of dp and ufp
are modified to int.

./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0.

Reported-by: Abaci Robot 
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962
Signed-off-by: Jiapeng Chong 
Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()

2023-02-06T06:52:37+00:00

[ Upstream commit 5daba914da0e48950e9407ea4d75fa57029c9adc ]

The clk_disable_unprepare() should be called in the error handling of
rockchip_usb2phy_power_on().

Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy")
Signed-off-by: Shang XiaoJing 
Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: stm32: fix an error code in probe

2022-11-25T16:42:03+00:00

[ Upstream commit ca1c73628f5bd0c1ef6e46073cc3be2450605b06 ]

If "index > usbphyc->nphys" is true then this returns success but it
should return -EINVAL.

Fixes: 94c358da3a05 ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)")
Signed-off-by: Dan Carpenter 
Reviewed-by: Amelie Delaunay 
Link: https://lore.kernel.org/r/Y0kq8j6S+5nDdMpr@kili
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: qualcomm: call clk_disable_unprepare in the error handling

2022-10-26T11:22:40+00:00

[ Upstream commit c3966ced8eb8dc53b6c8d7f97d32cc8a2107d83e ]

Smatch reports the following error:

drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines:
58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on
lines: 58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines:
58.

Fix this by calling proper clk_disable_unprepare calls.

Fixes: 0b56e9a7e835 ("phy: Group vendor specific phy drivers")
Signed-off-by: Dongliang Mu 
Reviewed-by: Neil Armstrong 
Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin