linux-stable.git/drivers/phy, branch v5.18.4 Linux kernel stable tree phy: qcom-qmp: fix pipe-clock imbalance on power-on failure 2022-06-14T16:44:48+00:00 Johan Hovold johan+linaro@kernel.org 2022-05-02T13:31:29+00:00 32759f27edfee0f4ab4747b20a190f8d532b2d3a [ Upstream commit 5e73b2d9867998278479ccc065a8a8227a5513ef ] Make sure to disable the pipe clock also if ufs-reset deassertion fails during power on. Note that the ufs-reset is asserted in qcom_qmp_phy_com_exit(). Fixes: c9b589791fc1 ("phy: qcom: Utilize UFS reset controller") Cc: Evan Green <evgreen@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220502133130.4125-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5e73b2d9867998278479ccc065a8a8227a5513ef ]

Make sure to disable the pipe clock also if ufs-reset deassertion fails
during power on.

Note that the ufs-reset is asserted in qcom_qmp_phy_com_exit().

Fixes: c9b589791fc1 ("phy: qcom: Utilize UFS reset controller")
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220502133130.4125-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip-inno-usb2: Fix muxed interrupt support 2022-06-14T16:44:46+00:00 Samuel Holland samuel@sholland.org 2022-04-14T03:22:52+00:00 5bc9dd160de1055bf313b66ad5419c20a8e3624f [ Upstream commit 6a98df08ccd55e87947d253b19925691763e755c ] This commit fixes two issues with the muxed interrupt handler. First, the OTG port has the "bvalid" interrupt enabled, not "linestate". Since only the linestate interrupt was handled, and not the bvalid interrupt, plugging in a cable to the OTG port caused an interrupt storm. Second, the return values from the individual port IRQ handlers need to be OR-ed together. Otherwise, the lack of an interrupt from the last port would cause the handler to erroneously return IRQ_NONE. Fixes: ed2b5a8e6b98 ("phy: phy-rockchip-inno-usb2: support muxed interrupts") Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-2-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6a98df08ccd55e87947d253b19925691763e755c ]

This commit fixes two issues with the muxed interrupt handler. First,
the OTG port has the "bvalid" interrupt enabled, not "linestate". Since
only the linestate interrupt was handled, and not the bvalid interrupt,
plugging in a cable to the OTG port caused an interrupt storm.

Second, the return values from the individual port IRQ handlers need to
be OR-ed together. Otherwise, the lack of an interrupt from the last
port would cause the handler to erroneously return IRQ_NONE.

Fixes: ed2b5a8e6b98 ("phy: phy-rockchip-inno-usb2: support muxed interrupts")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220414032258.40984-2-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: qcom-qmp: fix reset-controller leak on probe errors 2022-06-09T08:30:55+00:00 Johan Hovold johan+linaro@kernel.org 2022-04-27T06:32:42+00:00 8c03eb0c8982677b4e17174073a011788891304d commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream. Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral). Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream.

Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).

Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org      # 4.12
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: qcom-qmp: fix struct clk leak on probe errors 2022-06-09T08:30:54+00:00 Johan Hovold johan+linaro@kernel.org 2022-04-27T06:32:41+00:00 ad9b0fad02f9b3a06ad5ac7df11f244e316a6254 commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream. Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral). Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream.

Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral).

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org      # 4.12
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe() 2022-04-20T09:12:44+00:00 Heiner Kallweit hkallweit1@gmail.com 2022-04-15T14:03:10+00:00 2c8045d48dee703ad8eab2be7d6547765a89c069 If clk_prepare_enable() fails we call clk_disable_unprepare() in the error path what results in a warning that the clock is disabled and unprepared already. And if we fail later in phy_g12a_usb3_pcie_probe() then we bail out w/o calling clk_disable_unprepare(). This patch fixes both errors. Fixes: 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
If clk_prepare_enable() fails we call clk_disable_unprepare()
in the error path what results in a warning that the clock
is disabled and unprepared already.
And if we fail later in phy_g12a_usb3_pcie_probe() then we
bail out w/o calling clk_disable_unprepare().
This patch fixes both errors.

Fixes: 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe 2022-04-14T05:08:58+00:00 Miaoqian Lin linmq006@gmail.com 2022-03-01T02:58:49+00:00 ce88613e5bd579478653a028291098143f2a5bdf The pm_runtime_enable() will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for serdes_am654_probe(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The pm_runtime_enable() will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for serdes_am654_probe().

Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe 2022-04-14T05:08:39+00:00 Miaoqian Lin linmq006@gmail.com 2022-03-01T02:46:11+00:00 d644e0d79829b1b9a14beedbdb0dc1256fc3677d The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to undo pm_runtime_use_autosuspend() In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
undo pm_runtime_use_autosuspend()
In the PM Runtime docs:
    Drivers in ->remove() callback should undo the runtime PM changes done
    in ->probe(). Usually this means calling pm_runtime_disable(),
    pm_runtime_dont_use_autosuspend() etc.

We should do this in error handling.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks 2022-04-13T09:33:39+00:00 Miaoqian Lin linmq006@gmail.com 2022-03-18T10:57:46+00:00 3588060befff75ff39fab7122b94c6fb3148fcda The corresponding API for clk_prepare_enable is clk_disable_unprepare. Make sure that the clock is unprepared on exit by changing clk_disable to clk_disable_unprepare. Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.

Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: ti: tusb1210: Fix an error handling path in tusb1210_probe() 2022-04-11T17:37:11+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2022-04-03T13:06:08+00:00 a9f17d0c0778dd971dc9770fa0a2085a41d8c5e4 tusb1210_probe_charger_detect() must be undone by a corresponding tusb1210_remove_charger_detect() in the error handling path, as already done in the remove function. Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/07c4926c42243cedb3b6067a241bb486fdda01b5.1648991162.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> 
tusb1210_probe_charger_detect() must be undone by a corresponding
tusb1210_remove_charger_detect() in the error handling path, as already
done in the remove function.

Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/07c4926c42243cedb3b6067a241bb486fdda01b5.1648991162.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: samsung: exynos5250-sata: fix missing device put in probe error paths 2022-04-11T17:17:42+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2022-04-07T09:18:57+00:00 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 The actions of of_find_i2c_device_by_node() in probe function should be reversed in error paths by putting the reference to obtained device. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The actions of of_find_i2c_device_by_node() in probe function should be
reversed in error paths by putting the reference to obtained device.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>