linux-stable.git/drivers/phy, branch linux-5.4.y Linux kernel stable tree phy: cadence: cdns-dphy: Enable lower resolutions in dphy 2025-12-03T11:45:11+00:00 Harikrishna Shenoy h-shenoy@ti.com 2025-08-07T05:20:02+00:00 f60168e62fd3b42bd2f23c464bb4a64b6629548f [ Upstream commit 43bd2c44515f8ee5c019ce6e6583f5640387a41b ] Enable support for data lane rates between 80-160 Mbps cdns dphy as mentioned in TRM [0] by setting the pll_opdiv field to 16. This change enables lower resolutions like 640x480 at 60Hz. [0]: https://www.ti.com/lit/zip/spruil1 (Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions) Reviewed-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com> Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 43bd2c44515f8ee5c019ce6e6583f5640387a41b ]

Enable support for data lane rates between 80-160 Mbps cdns dphy
as mentioned in TRM [0] by setting the pll_opdiv field to 16.
This change enables lower resolutions like 640x480 at 60Hz.

[0]: https://www.ti.com/lit/zip/spruil1
(Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions)

Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: ti-pipe3: fix device leak at unbind 2025-10-02T11:34:30+00:00 Johan Hovold johan@kernel.org 2025-07-24T13:12:06+00:00 289a414a4934fe5b6f672a96a35d9a31db19d9c0 commit e19bcea99749ce8e8f1d359f68ae03210694ad56 upstream. Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e19bcea99749ce8e8f1d359f68ae03210694ad56 upstream.

Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.

Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org	# 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: core: don't require set_mode() callback for phy_get_mode() to work 2025-06-04T12:32:33+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2025-02-09T12:31:45+00:00 3cd53e516f26570454df6c65819ea8d3b85a23a1 [ Upstream commit d58c04e305afbaa9dda7969151f06c4efe2c98b0 ] As reported by Damon Ding, the phy_get_mode() call doesn't work as expected unless the PHY driver has a .set_mode() call. This prompts PHY drivers to have empty stubs for .set_mode() for the sake of being able to get the mode. Make .set_mode() callback truly optional and update PHY's mode even if it there is none. Cc: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/96f8310f-93f1-4bcb-8637-137e1159ff83@rock-chips.com Tested-by: Damon Ding <damon.ding@rock-chips.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250209-phy-fix-set-moe-v2-1-76e248503856@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d58c04e305afbaa9dda7969151f06c4efe2c98b0 ]

As reported by Damon Ding, the phy_get_mode() call doesn't work as
expected unless the PHY driver has a .set_mode() call. This prompts PHY
drivers to have empty stubs for .set_mode() for the sake of being able
to get the mode.

Make .set_mode() callback truly optional and update PHY's mode even if
it there is none.

Cc: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/96f8310f-93f1-4bcb-8637-137e1159ff83@rock-chips.com
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250209-phy-fix-set-moe-v2-1-76e248503856@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: renesas: rcar-gen3-usb2: Set timing registers only once 2025-06-04T12:32:29+00:00 Claudiu Beznea claudiu.beznea.uj@bp.renesas.com 2025-05-07T12:50:32+00:00 2007f9dc73778db2ce94e9ca012aa0ba0ca01295 commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream. phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream.

phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common
to all PHYs. There is no need to set them every time a PHY is initialized.
Set timing register only when the 1st PHY is initialized.

Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: Fix error handling in tegra_xusb_port_init 2025-06-04T12:32:29+00:00 Ma Ke make24@iscas.ac.cn 2025-03-03T07:27:39+00:00 01bd47af241836abc34410cbeee479d06a19fa83 commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream. If device_add() fails, do not use device_unregister() for error handling. device_unregister() consists two functions: device_del() and put_device(). device_unregister() should only be called after device_add() succeeded because device_del() undoes what device_add() does if successful. Change device_unregister() to put_device() call before returning from the function. As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable@vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream.

If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.

As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk 2025-03-13T11:43:25+00:00 Kaustabh Chakraborty kauschluss@disroot.org 2025-02-08T18:59:30+00:00 4af1aff347b5c61d305a5599544cc7efa9cb5d91 commit e2158c953c973adb49383ddea2504faf08d375b7 upstream. In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not inverted when applied to the register values. Fix it. Cc: stable@vger.kernel.org Fixes: 59025887fb08 ("phy: Add new Exynos5 USB 3.0 PHY driver") Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e2158c953c973adb49383ddea2504faf08d375b7 upstream.

In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks
PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not
inverted when applied to the register values. Fix it.

Cc: stable@vger.kernel.org
Fixes: 59025887fb08 ("phy: Add new Exynos5 USB 3.0 PHY driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: tegra: xusb: reset VBUS & ID OVERRIDE 2025-03-13T11:43:25+00:00 BH Hsieh bhsieh@nvidia.com 2025-01-22T10:59:43+00:00 074f4e628441e4eb801596ce57e5fd16edb2aaeb commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream. Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed with unexpected value prior to XUSB PADCTL driver, this could also occur in virtualization scenario. For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set a type-c port to host mode and keeps the value to kernel. If the type-c port is connected a usb host, below errors can be observed right after usb host mode driver gets probed. The errors would keep until usb role class driver detects the type-c port as device mode and notifies usb device mode driver to set both ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL driver. [ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 173.765837] usb usb3-port2: config error Taking virtualization into account, asserting XUSB PADCTL reset would break XUSB functions used by other guest OS, hence only reset VBUS & ID OVERRIDE of the port in utmi_phy_init. Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support") Cc: stable@vger.kernel.org Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591 Signed-off-by: BH Hsieh <bhsieh@nvidia.com> Signed-off-by: Henry Lin <henryl@nvidia.com> Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream.

Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.

For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.

[  173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[  173.765837] usb usb3-port2: config error

Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.

Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: core: Fix that API devm_of_phy_provider_unregister() fails to unregister the phy provider 2025-02-01T17:18:49+00:00 Zijun Hu quic_zijuhu@quicinc.com 2024-12-13T12:36:42+00:00 1abde0742921a88a1e38a22f392f75e0c10c610c [ Upstream commit c0b82ab95b4f1fbc3e3aeab9d829d012669524b6 ] For devm_of_phy_provider_unregister(), its comment says it needs to invoke of_phy_provider_unregister() to unregister the phy provider, but it will not actually invoke the function since devres_destroy() does not call devm_phy_provider_release(), and the missing of_phy_provider_unregister() call will cause: - The phy provider fails to be unregistered. - Leak both memory and the OF node refcount. Fortunately, the faulty API has not been used by current kernel tree. Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c0b82ab95b4f1fbc3e3aeab9d829d012669524b6 ]

For devm_of_phy_provider_unregister(), its comment says it needs to invoke
of_phy_provider_unregister() to unregister the phy provider, but it will
not actually invoke the function since devres_destroy() does not call
devm_phy_provider_release(), and the missing of_phy_provider_unregister()
call will cause:

- The phy provider fails to be unregistered.
- Leak both memory and the OF node refcount.

Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.

Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: core: fix code style in devm_of_phy_provider_unregister 2025-02-01T17:18:49+00:00 Vinod Koul vkoul@kernel.org 2020-06-29T14:50:07+00:00 5c51a223fed1157fc6c933196677ab0f88b47325 [ Upstream commit b555f35f2f87f8a99ba8e65d3f51ae4294748b58 ] Documentation/process/coding-style.rst says: "functions: they have the opening brace at the beginning of the next line" devm_of_phy_provider_unregister() function has opening brace at same line, so fix it up. Link: https://lore.kernel.org/r/20200629145010.122675-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: c0b82ab95b4f ("phy: core: Fix that API devm_of_phy_provider_unregister() fails to unregister the phy provider") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b555f35f2f87f8a99ba8e65d3f51ae4294748b58 ]

Documentation/process/coding-style.rst says:
"functions: they have the opening brace at the beginning of the next
line"

devm_of_phy_provider_unregister() function has opening brace at same
line, so fix it up.

Link: https://lore.kernel.org/r/20200629145010.122675-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: c0b82ab95b4f ("phy: core: Fix that API devm_of_phy_provider_unregister() fails to unregister the phy provider")
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: core: Fix that API devm_phy_destroy() fails to destroy the phy 2025-01-09T12:23:31+00:00 Zijun Hu quic_zijuhu@quicinc.com 2024-12-13T12:36:43+00:00 677e77d2b5c76bd8723b7a2a1ce30d0da4da2cc6 commit 4dc48c88fcf82b89fdebd83a906aaa64f40fb8a9 upstream. For devm_phy_destroy(), its comment says it needs to invoke phy_destroy() to destroy the phy, but it will not actually invoke the function since devres_destroy() does not call devm_phy_consume(), and the missing phy_destroy() call will cause that the phy fails to be destroyed. Fortunately, the faulty API has not been used by current kernel tree. Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4dc48c88fcf82b89fdebd83a906aaa64f40fb8a9 upstream.

For devm_phy_destroy(), its comment says it needs to invoke phy_destroy()
to destroy the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_consume(), and the missing
phy_destroy() call will cause that the phy fails to be destroyed.

Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.

Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>