linux-stable.git/drivers/phy/tegra, branch linux-5.4.y

phy: Fix error handling in tegra_xusb_port_init

2025-06-04T12:32:29+00:00

commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream.

If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.

As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke 
Acked-by: Thierry Reding 
Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

phy: tegra: xusb: reset VBUS & ID OVERRIDE

2025-03-13T11:43:25+00:00

commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream.

Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.

For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.

[  173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[  173.765837] usb usb3-port2: config error

Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.

Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh 
Signed-off-by: Henry Lin 
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port

2023-05-17T09:35:54+00:00

[ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ]

The tegra_xusb_port_unregister should be called when usb2_port
and ulpi_port map fails in tegra_xusb_add_usb2_port() or in
tegra_xusb_add_ulpi_port(), fix it.

Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Gaosheng Cui 
Acked-by: Thierry Reding 
Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: tegra: xusb: Fix dangling pointer on probe failure

2020-12-02T07:49:50+00:00

[ Upstream commit eb9c4dd9bdfdebaa13846c16a8c79b5b336066b6 ]

If, for some reason, the xusb PHY fails to probe, it leaves
a dangling pointer attached to the platform device structure.

This would normally be harmless, but the Tegra XHCI driver then
goes and extract that pointer from the PHY device. Things go
downhill from there:

    8.752082] [004d554e5145533c] address between user and kernel address ranges
[    8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+)
[    8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S      W   E     5.9.0-rc7-00298-gf6337624c4fe #1980
[    8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT)
[    8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[    8.752115] pc : kobject_put+0x1c/0x21c
[    8.752120] lr : put_device+0x20/0x30
[    8.752121] sp : ffffffc012eb3840
[    8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638
[    8.752125] x27: ffffffc008d56440 x26: 0000000000000000
[    8.752128] x25: ffffff81eb508200 x24: 0000000000000000
[    8.752130] x23: ffffff81eb538800 x22: 0000000000000000
[    8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810
[    8.752134] x19: 3d4d554e51455300 x18: 0000000000000020
[    8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94
[    8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90
[    8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8
[    8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea
[    8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8
[    8.752146] x7 : 0000000000000001 x6 : 0000000000000001
[    8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000
[    8.752150] x3 : 0000000000000001 x2 : 0000000000000001
[    8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300
[    8.752155] Call trace:
[    8.752157]  kobject_put+0x1c/0x21c
[    8.752160]  put_device+0x20/0x30
[    8.752164]  tegra_xusb_padctl_put+0x24/0x3c
[    8.752170]  tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra]
[    8.752174]  platform_drv_probe+0x60/0xb4
[    8.752176]  really_probe+0xf0/0x504
[    8.752179]  driver_probe_device+0x100/0x170
[    8.752181]  device_driver_attach+0xcc/0xd4
[    8.752183]  __driver_attach+0xb0/0x17c
[    8.752185]  bus_for_each_dev+0x7c/0xd4
[    8.752187]  driver_attach+0x30/0x3c
[    8.752189]  bus_add_driver+0x154/0x250
[    8.752191]  driver_register+0x84/0x140
[    8.752193]  __platform_driver_register+0x54/0x60
[    8.752197]  tegra_xusb_init+0x40/0x1000 [xhci_tegra]
[    8.752201]  do_one_initcall+0x54/0x2d0
[    8.752205]  do_init_module+0x68/0x29c
[    8.752207]  load_module+0x2178/0x26c0
[    8.752209]  __do_sys_finit_module+0xb0/0x120
[    8.752211]  __arm64_sys_finit_module+0x2c/0x40
[    8.752215]  el0_svc_common.constprop.0+0x80/0x240
[    8.752218]  do_el0_svc+0x30/0xa0
[    8.752220]  el0_svc+0x18/0x50
[    8.752223]  el0_sync_handler+0x90/0x318
[    8.752225]  el0_sync+0x158/0x180
[    8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000)
[    8.752232] ---[ end trace 90f6c89d62d85ff5 ]---

Reset the pointer on probe failure fixes the issue.

Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Marc Zyngier 
Link: https://lore.kernel.org/r/20201013095820.311376-1-maz@kernel.org
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: tegra: Add PCIe PIPE2UPHY support

2019-08-13T15:01:15+00:00

Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC
interface with Universal PHY (UPHY) module through a PIPE2UPHY (P2U)
module. For each PCIe lane of a controller, there is a P2U unit
instantiated at hardware level. This driver provides support for the
programming required for each P2U that is going to be used for a PCIe
controller.

Signed-off-by: Vidya Sagar 
Signed-off-by: Lorenzo Pieralisi 
Acked-by: Kishon Vijay Abraham I 
Acked-by: Thierry Reding

Merge tag 'phy-for-5.2-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2019-07-01T10:11:43+00:00

Kishon writes:

phy: for 5.2-rc

  *) Move Tegra124 PLL power supplies to be enabled by xusb-tegra124
  *) Move Tegra210 PLL power supplies to be enabled by xusb-tegra210
  *) Minor fixes: fix memory leaks at error path and addresses coverity.

Signed-off-by: Kishon Vijay Abraham I 

* tag 'phy-for-5.2-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
  phy: tegra: xusb: Add Tegra210 PLL power supplies
  phy: tegra: xusb: Add Tegra124 PLL power supplies
  dt-bindings: phy: tegra-xusb: List PLL power supplies
  phy: usb: phy-brcm-usb: Remove sysfs attributes upon driver removal
  phy: renesas: rcar-gen2: Fix memory leak at error paths
  phy: qcom-qusb2: fix missing assignment of ret when calling clk_prepare_enable

phy: tegra: xusb: Add Tegra210 PLL power supplies

2019-06-12T10:05:44+00:00

The Tegra210 SoC has four inputs that consume power in order to supply
the PLLs that drive the various USB, PCI and SATA pads.

Signed-off-by: Thierry Reding 
Acked-by: Jon Hunter 
Tested-by: Jon Hunter 
Signed-off-by: Kishon Vijay Abraham I

phy: tegra: xusb: Add Tegra124 PLL power supplies

2019-06-12T10:05:44+00:00

The Tegra124 SoC has four inputs that consume power in order to supply
the PLLs that drive the various USB, PCI and SATA pads.

Signed-off-by: Thierry Reding 
Acked-by: Jon Hunter 
Tested-by: Jon Hunter 
Signed-off-by: Kishon Vijay Abraham I

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman