linux-stable.git/drivers/phy/rockchip, branch linux-6.17.y Linux kernel stable tree phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the limits 2025-12-18T12:59:49+00:00 Cristian Ciocaltea cristian.ciocaltea@collabora.com 2025-10-28T08:00:56+00:00 b58150251f9cbf5a9e98234edccc0b85d30a074c [ Upstream commit 51023cf6cc5db3423dea6620746d9087e336e024 ] Fixup PHY deskew FIFO to prevent the phase of D2 lane going ahead of other lanes. It's worth noting this might only happen when dealing with HDMI 2.0 rates. Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Co-developed-by: Algea Cao <algea.cao@rock-chips.com> Signed-off-by: Algea Cao <algea.cao@rock-chips.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-3-ecc642a59d94@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 51023cf6cc5db3423dea6620746d9087e336e024 ]

Fixup PHY deskew FIFO to prevent the phase of D2 lane going ahead of
other lanes.  It's worth noting this might only happen when dealing with
HDMI 2.0 rates.

Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-3-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth 2025-12-18T12:59:49+00:00 Cristian Ciocaltea cristian.ciocaltea@collabora.com 2025-10-28T08:00:55+00:00 282b57c430730ce1d76541912ced8e5ce246b522 [ Upstream commit 8daaced9f5eeb4a2c8ca08b0a8286b6a498a8387 ] Due to its relatively low frequency, a noise stemming from the 24MHz PLL reference clock may traverse the low-pass loop filter of ROPLL, which could potentially generate some HDMI flash artifacts. Reduce ROPLL loop bandwidth in an attempt to mitigate the problem. Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Co-developed-by: Algea Cao <algea.cao@rock-chips.com> Signed-off-by: Algea Cao <algea.cao@rock-chips.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-2-ecc642a59d94@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8daaced9f5eeb4a2c8ca08b0a8286b6a498a8387 ]

Due to its relatively low frequency, a noise stemming from the 24MHz PLL
reference clock may traverse the low-pass loop filter of ROPLL, which
could potentially generate some HDMI flash artifacts.

Reduce ROPLL loop bandwidth in an attempt to mitigate the problem.

Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-2-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip: samsung-hdptx: Fix reported clock rate in high bpc mode 2025-12-18T12:59:49+00:00 Cristian Ciocaltea cristian.ciocaltea@collabora.com 2025-10-28T08:00:54+00:00 a963ffc0c4a5e03c8986d39839d74b9849306443 [ Upstream commit 72126e9623e1696ea83c77ef6d0306a6263bdd6b ] When making use of the clock provider functionality, the output clock does normally match the TMDS character rate, which is what the PHY PLL gets configured to. However, this is only applicable for default color depth of 8 bpc. For higher depths, the output clock is further divided by the hardware according to the formula: output_clock_rate = tmds_char_rate * 8 / bpc Since the existence of the clock divider wasn't taken into account when support for high bpc has been introduced, make the necessary adjustments to report the correct clock rate. Fixes: 9d0ec51d7c22 ("phy: rockchip: samsung-hdptx: Add high color depth management") Reported-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-1-ecc642a59d94@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 72126e9623e1696ea83c77ef6d0306a6263bdd6b ]

When making use of the clock provider functionality, the output clock
does normally match the TMDS character rate, which is what the PHY PLL
gets configured to.

However, this is only applicable for default color depth of 8 bpc.  For
higher depths, the output clock is further divided by the hardware
according to the formula:

  output_clock_rate = tmds_char_rate * 8 / bpc

Since the existence of the clock divider wasn't taken into account when
support for high bpc has been introduced, make the necessary adjustments
to report the correct clock rate.

Fixes: 9d0ec51d7c22 ("phy: rockchip: samsung-hdptx: Add high color depth management")
Reported-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-1-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562 2025-12-18T12:59:49+00:00 Shawn Lin shawn.lin@rock-chips.com 2025-11-18T09:52:06+00:00 515f2d79add838299b82fe703d4d3dbdb5218858 [ Upstream commit be866e68966d20bcc4a73708093d577176f99c0c ] When PCIe link enters L1 PM substates, the PHY will turn off its PLL for power-saving. However, it turns off the PLL too fast which leads the PHY to be broken. According to the PHY document, we need to delay PLL turnoff time. Fixes: f13bff25161b ("phy: rockchip-naneng-combo: Support rk3562") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be866e68966d20bcc4a73708093d577176f99c0c ]

When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.

Fixes: f13bff25161b ("phy: rockchip-naneng-combo: Support rk3562")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip: naneng-combphy: Add SoC prefix to register definitions 2025-12-18T12:59:49+00:00 Yao Zi ziyao@disroot.org 2025-07-28T10:29:46+00:00 d695278a6a4304de71f9139f6d33af6f1fc97325 [ Upstream commit b3bbc6afcff50e2fd4d51dd64929e62d66fdc814 ] All supported variants of naneng-combphy follow a register layout similar to the RK3568 variant with some exceptions of SoC-specific registers. Add RK3568 prefix for the common set of registers and the corresponding SoC prefix for SoC-specific registers, making usage of definitions clear and preparing for future COMBPHY variants with a different register layout. Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250728102947.38984-6-ziyao@disroot.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: be866e68966d ("phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b3bbc6afcff50e2fd4d51dd64929e62d66fdc814 ]

All supported variants of naneng-combphy follow a register layout
similar to the RK3568 variant with some exceptions of SoC-specific
registers.

Add RK3568 prefix for the common set of registers and the corresponding
SoC prefix for SoC-specific registers, making usage of definitions clear
and preparing for future COMBPHY variants with a different register
layout.

Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250728102947.38984-6-ziyao@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: be866e68966d ("phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562")
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0 2025-11-13T20:37:19+00:00 Michael Riesch michael.riesch@collabora.com 2025-09-03T17:04:52+00:00 ffe7379030d6623e8d1e04b02c1ab30199095269 [ Upstream commit 8c7c19466c854fa86b82d2148eaa9bf0e6531423 ] The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF this offset is perfectly fine (in fact, register 0 is the only one in this register file). Introduce a boolean variable to indicate valid registers and allow writes to register 0. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Michael Riesch <michael.riesch@collabora.com> Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8c7c19466c854fa86b82d2148eaa9bf0e6531423 ]

The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset
value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF
this offset is perfectly fine (in fact, register 0 is the only one in
this register file).
Introduce a boolean variable to indicate valid registers and allow writes
to register 0.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip: naneng-combphy: Enable U3 OTG port for RK3568 2025-10-15T10:03:42+00:00 Jonas Karlman jonas@kwiboo.se 2025-07-23T07:23:22+00:00 0e55a977182ca542e7c3eb7f555d476d52405c59 [ Upstream commit 7bb14b61b7d03db770b7e8871493f5b9b2be2b79 ] The boot firmware may disable the U3 port early during boot and leave it up to the controller or PHY driver to re-enable U3 when needed. The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588, something the Rockchip Naneng Combo PHY driver never does for RK3568. This may result in USB 3.0 ports being limited to only using USB 2.0 or in special cases not working at all on RK3568. Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled when a PHY with PHY_TYPE_USB3 mode is used. Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7bb14b61b7d03db770b7e8871493f5b9b2be2b79 ]

The boot firmware may disable the U3 port early during boot and leave it
up to the controller or PHY driver to re-enable U3 when needed.

The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588,
something the Rockchip Naneng Combo PHY driver never does for RK3568.
This may result in USB 3.0 ports being limited to only using USB 2.0 or
in special cases not working at all on RK3568.

Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled
when a PHY with PHY_TYPE_USB3 mode is used.

Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal 2025-07-22T12:28:45+00:00 Geraldo Nascimento geraldogabriel@gmail.com 2025-06-30T22:25:28+00:00 25facbabc3fc33c794ad09d73f73268c0f8cbc7d pcie_conf is used to touch TEST_WRITE strobe signal. This signal should be enabled, a little time waited, and then disabled. Current code clearly was copy-pasted and never disables the strobe signal. Adjust the define. While at it, remove PHY_CFG_RD_MASK which has been unused since 64cdc0360811 ("phy: rockchip-pcie: remove unused phy_rd_cfg function"). Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com> Link: https://lore.kernel.org/r/d514d5d5627680caafa8b7548cbdfee4307f5440.1751322015.git.geraldogabriel@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
pcie_conf is used to touch TEST_WRITE strobe signal. This signal should
be enabled, a little time waited, and then disabled. Current code clearly
was copy-pasted and never disables the strobe signal. Adjust the define.
While at it, remove PHY_CFG_RD_MASK which has been unused since
64cdc0360811 ("phy: rockchip-pcie: remove unused phy_rd_cfg function").

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/d514d5d5627680caafa8b7548cbdfee4307f5440.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: rockchip-pcie: Enable all four lanes if required 2025-07-22T12:28:44+00:00 Valmantas Paliksa walmis@gmail.com 2025-06-30T22:25:14+00:00 c3fe7071e196e25789ecf90dbc9e8491a98884d7 Current code enables only Lane 0 because pwr_cnt will be incremented on first call to the function. Let's reorder the enablement code to enable all 4 lanes through GRF. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Valmantas Paliksa <walmis@gmail.com> Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/16b610aab34e069fd31d9f57260c10df2a968f80.1751322015.git.geraldogabriel@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Current code enables only Lane 0 because pwr_cnt will be incremented on
first call to the function. Let's reorder the enablement code to enable
all 4 lanes through GRF.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

Signed-off-by: Valmantas Paliksa <walmis@gmail.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/16b610aab34e069fd31d9f57260c10df2a968f80.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy 2025-06-05T15:20:21+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-05T15:20:21+00:00 d12ed2b7e1fe5c9e4a372a95fb7635a7f81eff6a Pull phy updates from Vinod Koul: "As usual featuring couple of new driver and bunch of new device support and some driver changes to Freescale, rockchip driver along with couple of yaml binding conversions. New Support: - Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver - Rockchip usb2 support for RK3562, RK3036 usb2 phy support - Samsung exynos2200 eusb2 phy support and driver refactoring for this support, exynos7870 USBDRD support - Mediatek MT7988 xs-phy support - Broadcom BCM74110 usb phy support - Renesas RZ/V2H(P) usb2 phy support Updates: - Freescale phy rate claculation updates, i.MX95 tuning support - Better error handling for amlogic pcie phy - Rockchip color depth configuration and management support - Yaml binding conversion for RK3399 Type-C and PCIe Phy" * tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits) phy: tegra: p2u: Broaden architecture dependency phy: rockchip: inno-usb2: Add usb2 phy support for rk3562 dt-bindings: phy: rockchip,inno-usb2phy: add rk3562 phy: rockchip: inno-usb2: add phy definition for rk3036 dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P) phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller phy: phy-snps-eusb2: add support for exynos2200 phy: phy-snps-eusb2: refactor reference clock init phy: phy-snps-eusb2: make reset control optional phy: phy-snps-eusb2: make repeater optional phy: phy-snps-eusb2: split phy init code phy: phy-snps-eusb2: refactor constructs names phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory ... 
Pull phy updates from Vinod Koul:
 "As usual featuring couple of new driver and bunch of new device
  support and some driver changes to Freescale, rockchip driver along
  with couple of yaml binding conversions.

  New Support:
   - Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
   - Rockchip usb2 support for RK3562, RK3036 usb2 phy support
   - Samsung exynos2200 eusb2 phy support and driver refactoring for
     this support, exynos7870 USBDRD support
   - Mediatek MT7988 xs-phy support
   - Broadcom BCM74110 usb phy support
   - Renesas RZ/V2H(P) usb2 phy support

  Updates:
   - Freescale phy rate claculation updates, i.MX95 tuning support
   - Better error handling for amlogic pcie phy
   - Rockchip color depth configuration and management support
   - Yaml binding conversion for RK3399 Type-C and PCIe Phy"

* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
  phy: tegra: p2u: Broaden architecture dependency
  phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
  dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
  phy: rockchip: inno-usb2: add phy definition for rk3036
  dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
  phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
  phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
  phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
  phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
  phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
  dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
  dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
  phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
  phy: phy-snps-eusb2: add support for exynos2200
  phy: phy-snps-eusb2: refactor reference clock init
  phy: phy-snps-eusb2: make reset control optional
  phy: phy-snps-eusb2: make repeater optional
  phy: phy-snps-eusb2: split phy init code
  phy: phy-snps-eusb2: refactor constructs names
  phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
  ...