linux-stable.git/drivers/phy/rockchip, branch linux-5.6.y Linux kernel stable tree Merge tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next 2020-01-17T06:52:26+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-01-17T06:52:26+00:00 50f737ab96c7977317a47e60c52f4f0ce8b64e7f Kishon writes: phy: for 5.6 *) Add support in PHY core to create link between PHY consumer and PHY provider *) Add DisplayPort PHY configuration set to be used for negotiating the configurations to be used between DisplayPort controller and DisplayPort PHY *) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for J721E SoC (Supports USB and PCIe) *) Add PHY driver for eMMC PHY in Intel LGM SoC *) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new Synopsys USB Controller *) Add support for 16nm SATA PHY present in Broadcom 7216 SoC *) Fix lost packet issue, fix MDIO from getting inaccessible, fix occasional transaction failures, fix USB driver from crashing in Broadcom USB PHY driver *) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150 *) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from display controller to rockchip-inno-dsidphy *) Other cleanups including compile testing for some of the PHY drivers, fixing Kconfig indentation, duplicate writes in drivers etc., Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits) dt-bindings: phy: Add PHY_TYPE_DP definition phy: ti: j721e-wiz: Fix return value check in wiz_probe() dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE phy: ti: j721e-wiz: Manage typec-gpio-dir dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO phy: cadence: Sierra: add phy_reset hook phy: cadence: Sierra: remove redundant initialization of pointer regmap phy: Add DisplayPort configuration options phy: Enable compile testing for some of drivers phy: mediatek: Fix Kconfig indentation phy: intel-lgm-emmc: Add support for eMMC PHY dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC dt-bindings: phy: Document WIZ (SERDES wrapper) bindings phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove() phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz phy: cadence: Sierra: Change MAX_LANES of Sierra to 16 phy: cadence: Sierra: Check for PLL lock during PHY power on phy: cadence: Sierra: Get reset control "array" for each link ... 
Kishon writes:

phy: for 5.6

*) Add support in PHY core to create link between PHY consumer and PHY
   provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
   configurations to be used between DisplayPort controller and
   DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
   TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
   J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
   Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
   occasional transaction failures, fix USB driver from crashing in
   Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
   display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
   fixing Kconfig indentation, duplicate writes in drivers etc.,

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits)
  dt-bindings: phy: Add PHY_TYPE_DP definition
  phy: ti: j721e-wiz: Fix return value check in wiz_probe()
  dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema
  phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE
  phy: ti: j721e-wiz: Manage typec-gpio-dir
  dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  phy: cadence: Sierra: add phy_reset hook
  phy: cadence: Sierra: remove redundant initialization of pointer regmap
  phy: Add DisplayPort configuration options
  phy: Enable compile testing for some of drivers
  phy: mediatek: Fix Kconfig indentation
  phy: intel-lgm-emmc: Add support for eMMC PHY
  dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
  phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
  dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
  phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
  phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
  phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
  phy: cadence: Sierra: Check for PLL lock during PHY power on
  phy: cadence: Sierra: Get reset control "array" for each link
  ...
phy/rockchip: inno-dsidphy: generalize parameter handling 2020-01-08T07:28:06+00:00 Heiko Stuebner heiko.stuebner@theobroma-systems.com 2019-11-08T00:06:40+00:00 f0684c1a836770afba7a7097e61935edd69693bf During review it came to light that exposing the pll clock outside is not the right approach and struct phy_configure_opts_mipi_dphy exists just for that reason to transfer parameters to the phy. So drop the exposed clock and rely on the phy configure options to bring in the correct rate. That way we can also just drop the open coded timing struct and default values function. Fixes: b7535a3bc0ba ("phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY") Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
During review it came to light that exposing the pll clock outside is
not the right approach and struct phy_configure_opts_mipi_dphy exists
just for that reason to transfer parameters to the phy.

So drop the exposed clock and rely on the phy configure options
to bring in the correct rate. That way we can also just drop the
open coded timing struct and default values function.

Fixes: b7535a3bc0ba ("phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz 2019-12-31T10:16:08+00:00 Jonas Karlman jonas@kwiboo.se 2019-12-23T08:49:19+00:00 4f510aa10468954b1da4e94689c38ac6ea8d3627 Commit 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") changed what rate clk_round_rate() is called with, an additional 999 Hz added to the requsted mode clock. This has caused a regression on RK3328 and presumably also on RK3228 because the inno-hdmi-phy clock requires an exact match of the requested rate in the pre pll config table. When an exact match is not found the parent clock rate (24MHz) is returned to the clk_round_rate() caller. This cause wrong pixel clock to be used and result in no-signal when configuring a mode on RK3328. Fix this by rounding the rate down to closest 1000 Hz in round_rate func, this allows an exact match to be found in pre pll config table. Fixes: 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
Commit 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework")
changed what rate clk_round_rate() is called with, an additional 999 Hz
added to the requsted mode clock. This has caused a regression on RK3328
and presumably also on RK3228 because the inno-hdmi-phy clock requires an
exact match of the requested rate in the pre pll config table.

When an exact match is not found the parent clock rate (24MHz) is returned
to the clk_round_rate() caller. This cause wrong pixel clock to be used and
result in no-signal when configuring a mode on RK3328.

Fix this by rounding the rate down to closest 1000 Hz in round_rate func,
this allows an exact match to be found in pre pll config table.

Fixes: 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
phy: phy-rockchip-inno-usb2: add phy description for px30 2019-10-31T12:57:47+00:00 Heiko Stuebner heiko@sntech.de 2019-09-17T08:25:32+00:00 4569e64ab6a590dec418f2cd98fbe907a08fd452 The px30 soc from Rockchip shares the same register description as the rk3328, so can re-use its definitions. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
The px30 soc from Rockchip shares the same register description as
the rk3328, so can re-use its definitions.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY 2019-10-31T11:24:00+00:00 Wyon Bi bivvy.bi@rock-chips.com 2019-10-23T22:38:51+00:00 b7535a3bc0bac70e9644fb35cdeffabb59f578ee The Innosilicon Video Combo PHY not only supports MIPI DSI, but also LVDS and TTL functions with small die size and low pin count. Customers can choose according to their own applications. Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com> [removed TTL mode for now, as it required a hook back into the dsi host] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
The Innosilicon Video Combo PHY not only supports MIPI DSI,
but also LVDS and TTL functions with small die size and low
pin count. Customers can choose according to their own applications.

Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
[removed TTL mode for now, as it required a hook back into the dsi host]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
phy-rockchip-inno-hdmi: Fix RK3328_TERM_RESISTOR_CALIB_SPEED_7_0's third value 2019-08-27T06:06:36+00:00 Nathan Chancellor natechancellor@gmail.com 2019-08-07T19:23:05+00:00 64ea59577f68667141609c6573a392d54fc7edbd After commit "linux/bits.h: Add compile time sanity check of GENMASK inputs" [1], arm64 defconfig builds started failing: In file included from ../include/linux/bits.h:22, from ../include/linux/bitops.h:5, from ../include/linux/kernel.h:12, from ../include/linux/clk.h:13, from ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:9: ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c: In function 'inno_hdmi_phy_rk3328_power_on': ../include/linux/build_bug.h:16:45: error: negative width in bit-field '<anonymous>' 16 | #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); })) | ^ ../include/linux/bits.h:24:18: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 24 | ((unsigned long)BUILD_BUG_ON_ZERO(__builtin_choose_expr( \ | ^~~~~~~~~~~~~~~~~ ../include/linux/bits.h:39:3: note: in expansion of macro 'GENMASK_INPUT_CHECK' 39 | (GENMASK_INPUT_CHECK(high, low) + __GENMASK(high, low)) | ^~~~~~~~~~~~~~~~~~~ ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:24:42: note: in expansion of macro 'GENMASK' 24 | #define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l))) | ^~~~~~~ ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:201:50: note: in expansion of macro 'UPDATE' 201 | #define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 9) | ^~~~~~ ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:1046:26: note: in expansion of macro 'RK3328_TERM_RESISTOR_CALIB_SPEED_7_0' 1046 | inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ As pointed out by Robin and Guenter, inno_write's val argument is an 8-bit value so having a mask larger than that doesn't make sense. This also matches the rest of the *_7_0 macros in this driver. [1]: https://lore.kernel.org/lkml/20190801230358.4193-2-rikard.falkeborn@gmail.com/ Reported-by: Andrzej Hajda <a.hajda@samsung.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> 
After commit "linux/bits.h: Add compile time sanity check of GENMASK
inputs" [1], arm64 defconfig builds started failing:

In file included from ../include/linux/bits.h:22,
                 from ../include/linux/bitops.h:5,
                 from ../include/linux/kernel.h:12,
                 from ../include/linux/clk.h:13,
                 from ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:9:
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c: In function 'inno_hdmi_phy_rk3328_power_on':
../include/linux/build_bug.h:16:45: error: negative width in bit-field '<anonymous>'
   16 | #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); }))
      |                                             ^
../include/linux/bits.h:24:18: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
   24 |  ((unsigned long)BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
      |                  ^~~~~~~~~~~~~~~~~
../include/linux/bits.h:39:3: note: in expansion of macro 'GENMASK_INPUT_CHECK'
   39 |  (GENMASK_INPUT_CHECK(high, low) + __GENMASK(high, low))
      |   ^~~~~~~~~~~~~~~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:24:42: note: in expansion of macro 'GENMASK'
   24 | #define UPDATE(x, h, l)  (((x) << (l)) & GENMASK((h), (l)))
      |                                          ^~~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:201:50: note: in expansion of macro 'UPDATE'
  201 | #define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x)  UPDATE(x, 7, 9)
      |                                                  ^~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:1046:26: note: in expansion of macro 'RK3328_TERM_RESISTOR_CALIB_SPEED_7_0'
 1046 |   inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));
      |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

As pointed out by Robin and Guenter, inno_write's val argument is an
8-bit value so having a mask larger than that doesn't make sense. This
also matches the rest of the *_7_0 macros in this driver.

[1]: https://lore.kernel.org/lkml/20190801230358.4193-2-rikard.falkeborn@gmail.com/

Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235 2019-06-19T15:09:07+00:00 Thomas Gleixner tglx@linutronix.de 2019-06-03T05:44:51+00:00 2504ba9f5970299a33ca7802c60359f849146d78 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 53 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 53 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 2019-06-05T15:36:37+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-29T14:17:56+00:00 9c92ab61914157664a2fbdf926df0eb937838e45 Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178 2019-05-30T18:29:19+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-28T16:57:07+00:00 84a14ae8c44fb4828a05f363a09c3261472de00e Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 24 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 24 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30T18:26:37+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-27T06:55:06+00:00 c942fddf8793b2013be8c901b47d0a8dc02bf99f Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>