linux-stable.git/drivers/phy/qualcomm, branch v5.15.78

phy: qualcomm: call clk_disable_unprepare in the error handling

2022-10-26T10:35:14+00:00

[ Upstream commit c3966ced8eb8dc53b6c8d7f97d32cc8a2107d83e ]

Smatch reports the following error:

drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines:
58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on
lines: 58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines:
58.

Fix this by calling proper clk_disable_unprepare calls.

Fixes: 0b56e9a7e835 ("phy: Group vendor specific phy drivers")
Signed-off-by: Dongliang Mu 
Reviewed-by: Neil Armstrong 
Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: qcom-qmp: fix pipe-clock imbalance on power-on failure

2022-06-14T16:36:06+00:00

[ Upstream commit 5e73b2d9867998278479ccc065a8a8227a5513ef ]

Make sure to disable the pipe clock also if ufs-reset deassertion fails
during power on.

Note that the ufs-reset is asserted in qcom_qmp_phy_com_exit().

Fixes: c9b589791fc1 ("phy: qcom: Utilize UFS reset controller")
Cc: Evan Green 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20220502133130.4125-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: qcom-qmp: fix reset-controller leak on probe errors

2022-06-09T08:23:30+00:00

commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream.

Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).

Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org      # 4.12
Cc: Vivek Gautam 
Reviewed-by: Philipp Zabel 
Signed-off-by: Johan Hovold 
Reviewed-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

phy: qcom-qmp: fix struct clk leak on probe errors

2022-06-09T08:23:29+00:00

commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream.

Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral).

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org      # 4.12
Cc: Vivek Gautam 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

phy: qcom-snps: Correct the FSEL_MASK

2021-11-18T18:16:56+00:00

[ Upstream commit b475bf0ec40a2b13fb32ef62f5706576d5858460 ]

The FSEL_MASK which selects the refclock is defined incorrectly.
It should be [4:6] not [5:7]. Due to this incorrect definition, the BIT(7)
in USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 is reset which keeps PHY analog
blocks ON during suspend.
Fix this issue by correctly defining the FSEL_MASK.

Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs")
Signed-off-by: Sandeep Maheswaram 
Link: https://lore.kernel.org/r/1635135575-5668-1-git-send-email-quic_c_sanm@quicinc.com
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: qcom-qmp: another fix for the sc8180x PCIe definition

2021-11-18T18:16:56+00:00

[ Upstream commit 26f71abef580537d978f6299330689f029ee1e6c ]

Commit f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support") added
SC8180X PCIe tables, but used sm8250_qmp_pcie_serdes_tbl as a serdes
table because of the copy paste error. Commit bfccd9a71a08 ("phy:
qcom-qmp: Fix sc8180x PCIe definition") corrected part of this mistake
by pointing serdes_tbl to sc8180x_qmp_pcie_serdes_tbl, however the
serdes_tbl_num field was not updated to use sc8180x table. So let's now
fix the serdes_tbl_num field too.

Fixes: bfccd9a71a08 ("phy: qcom-qmp: Fix sc8180x PCIe definition")
Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20211020155604.1374530-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: qcom-qusb2: Fix a memory leak on probe

2021-11-18T18:16:55+00:00

[ Upstream commit bf7ffcd0069d30e2e7ba2b827f08c89f471cd1f3 ]

On success nvmem_cell_read() returns a pointer to a dynamically allocated
buffer, and therefore it shall be freed after usage.

The issue is reported by kmemleak:

  # cat /sys/kernel/debug/kmemleak
  unreferenced object 0xffff3b3803e4b280 (size 128):
    comm "kworker/u16:1", pid 107, jiffies 4294892861 (age 94.120s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<000000007739afdc>] __kmalloc+0x27c/0x41c
      [<0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0
      [<00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc
      [<00000000fc81fcfa>] phy_init+0x70/0x110
      [<00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234
      [<0000000027d1dbd4>] dwc3_core_init+0x68/0x990
      [<000000001965faf9>] dwc3_probe+0x4f4/0x730
      [<000000002f7617ca>] platform_probe+0x74/0xf0
      [<00000000a2576cac>] really_probe+0xc4/0x470
      [<00000000bc77f2c5>] __driver_probe_device+0x11c/0x190
      [<00000000130db71f>] driver_probe_device+0x48/0x110
      [<0000000019f36c2b>] __device_attach_driver+0xa4/0x140
      [<00000000e5812ff7>]  bus_for_each_drv+0x84/0xe0
      [<00000000f4bac574>] __device_attach+0xe4/0x1c0
      [<00000000d3beb631>] device_initial_probe+0x20/0x30
      [<000000008019b9db>] bus_probe_device+0xa4/0xb0

Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Vladimir Zapolskiy 
Reviewed-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20210922233548.2150244-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

phy: qcom-qmp: Add support for SM6115 UFS phy

2021-08-23T05:42:30+00:00

Add the tables and constants for init sequences for UFS QMP phy found in
SM4250/6115 SoC. The phy is a variation of the v2 phy, but is mistakenly
labeled as v3-660 in downstream sources.

QSERDES COM, RX, TX registers match fully existing v2 registers, with
a few additions. PCS registers don't have much in common, but there are
no clashes with existing ones so new registers were added to existing v2
PCS pack.

Signed-off-by: Iskren Chernev 
Link: https://lore.kernel.org/r/20210821155657.893165-3-iskren.chernev@gmail.com
Signed-off-by: Vinod Koul

phy: qmp: Provide unique clock names for DP clocks

2021-08-20T03:52:30+00:00

The USB/DP combo PHY exposes the "qmp_dp_phy_pll_link_clk" and
"qmp_dp_phy_pll_vco_div_clk" clocks, that are consumed by the display
clock controller. But for boards with multiple enabled QMP USB/DP combo
instances the hard coded names collides - and hence only the first
probed device is allowed to register.

Given that clocks are no longer reference globally by name and it's
possible to replace the hard coded names by something unique, but still
user friendly.

The two new clock names are based on dev_name() and results in names
such as "88ee000.phy::link_clk" and "88ee000.phy::vco_div_clk".

Signed-off-by: Bjorn Andersson 
Reviewed-by: Stephen Boyd 
Link: https://lore.kernel.org/r/20210722030738.3385821-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul

phy: qcom-qmp: add USB3 PHY support for IPQ6018

2021-08-06T13:04:58+00:00

Initialization is identical to the IPQ8074 USB3 PHY.

Signed-off-by: Baruch Siach 
Link: https://lore.kernel.org/r/6eec7ef4ecd1e8360ebe8e425151121684e997ed.1628085910.git.baruch@tkos.co.il
Signed-off-by: Vinod Koul