linux-stable.git/drivers/phy/qualcomm, branch v5.15 Linux kernel stable tree phy: qcom-qmp: Add support for SM6115 UFS phy 2021-08-23T05:42:30+00:00 Iskren Chernev iskren.chernev@gmail.com 2021-08-21T15:56:56+00:00 152a810eae03f16e982444ffe3b0eca933a750cd Add the tables and constants for init sequences for UFS QMP phy found in SM4250/6115 SoC. The phy is a variation of the v2 phy, but is mistakenly labeled as v3-660 in downstream sources. QSERDES COM, RX, TX registers match fully existing v2 registers, with a few additions. PCS registers don't have much in common, but there are no clashes with existing ones so new registers were added to existing v2 PCS pack. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210821155657.893165-3-iskren.chernev@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add the tables and constants for init sequences for UFS QMP phy found in
SM4250/6115 SoC. The phy is a variation of the v2 phy, but is mistakenly
labeled as v3-660 in downstream sources.

QSERDES COM, RX, TX registers match fully existing v2 registers, with
a few additions. PCS registers don't have much in common, but there are
no clashes with existing ones so new registers were added to existing v2
PCS pack.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210821155657.893165-3-iskren.chernev@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qmp: Provide unique clock names for DP clocks 2021-08-20T03:52:30+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2021-07-22T03:07:38+00:00 34633219b8947314d369ddf7bc2e45ac5aec7765 The USB/DP combo PHY exposes the "qmp_dp_phy_pll_link_clk" and "qmp_dp_phy_pll_vco_div_clk" clocks, that are consumed by the display clock controller. But for boards with multiple enabled QMP USB/DP combo instances the hard coded names collides - and hence only the first probed device is allowed to register. Given that clocks are no longer reference globally by name and it's possible to replace the hard coded names by something unique, but still user friendly. The two new clock names are based on dev_name() and results in names such as "88ee000.phy::link_clk" and "88ee000.phy::vco_div_clk". Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210722030738.3385821-1-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The USB/DP combo PHY exposes the "qmp_dp_phy_pll_link_clk" and
"qmp_dp_phy_pll_vco_div_clk" clocks, that are consumed by the display
clock controller. But for boards with multiple enabled QMP USB/DP combo
instances the hard coded names collides - and hence only the first
probed device is allowed to register.

Given that clocks are no longer reference globally by name and it's
possible to replace the hard coded names by something unique, but still
user friendly.

The two new clock names are based on dev_name() and results in names
such as "88ee000.phy::link_clk" and "88ee000.phy::vco_div_clk".

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210722030738.3385821-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp: add USB3 PHY support for IPQ6018 2021-08-06T13:04:58+00:00 Baruch Siach baruch@tkos.co.il 2021-08-04T14:05:06+00:00 23fd679249df82b57390c8f4f0f290fd1f7b3505 Initialization is identical to the IPQ8074 USB3 PHY. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/6eec7ef4ecd1e8360ebe8e425151121684e997ed.1628085910.git.baruch@tkos.co.il Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Initialization is identical to the IPQ8074 USB3 PHY.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/6eec7ef4ecd1e8360ebe8e425151121684e997ed.1628085910.git.baruch@tkos.co.il
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom: qmp: Add SC8180x USB/DP combo 2021-08-06T12:06:55+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2021-07-21T22:56:30+00:00 1633802cd4ac338554ec94cd4d46ac5ef322aa49 The two USB QMPs are USB/DP compbo PHYs, add the compatible for this combination to allow DP output. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210721225630.3035861-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The two USB QMPs are USB/DP compbo PHYs, add the compatible for this
combination to allow DP output.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721225630.3035861-2-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qualcomm: phy-qcom-usb-hs: repair non-kernel-doc comment 2021-08-06T11:45:29+00:00 Randy Dunlap rdunlap@infradead.org 2021-07-23T02:25:48+00:00 07e97f744c3bb9249e72e634f713d665436ffd72 Fix errant use of "/**" to begin a comment although the comment is not kernel-doc notation. Just use "/*" instead. Fixes this kernel-doc warning: drivers/phy/qualcomm/phy-qcom-usb-hs.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Copyright (C) 2016 Linaro Ltd Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210723022548.25695-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Fix errant use of "/**" to begin a comment although the comment
is not kernel-doc notation. Just use "/*" instead.

Fixes this kernel-doc warning:

drivers/phy/qualcomm/phy-qcom-usb-hs.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * Copyright (C) 2016 Linaro Ltd

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: linux-phy@lists.infradead.org
Link: https://lore.kernel.org/r/20210723022548.25695-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp: Fix sc8180x PCIe definition 2021-07-22T09:10:30+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2021-07-21T16:30:29+00:00 bfccd9a71a08627bcccd40277967516ddd9d5db2 A copy paste error was snuck into the patch going upstream that made the SC8180x PCIe PHY use the SM8250 serdes table, but while this works there's some differences in the tables (and the SC8180x was left dangling). So correct the SC8180x definition to use the SC8180x serdes table. Fixes: f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210721163029.2813497-1-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
A copy paste error was snuck into the patch going upstream that made the
SC8180x PCIe PHY use the SM8250 serdes table, but while this works
there's some differences in the tables (and the SC8180x was left
dangling). So correct the SC8180x definition to use the SC8180x serdes
table.

Fixes: f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721163029.2813497-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp: Add sc8180x PCIe support 2021-07-20T10:34:39+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2021-06-29T00:45:09+00:00 f839f14e24f27ccb1b822dd52f2ff4db340da52a The Qualcomm SC8180x platform has 4 PCIe controllers and PHYs, typically used to connect things such as a modem or NVME storage device. Add the programming sequence to get the PHYs up and running. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210629004509.1788286-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The Qualcomm SC8180x platform has 4 PCIe controllers and PHYs, typically
used to connect things such as a modem or NVME storage device. Add the
programming sequence to get the PHYs up and running.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210629004509.1788286-2-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2021-07-05T21:16:22+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-07-05T21:16:22+00:00 79160a603bdb51916226caf4a6616cc4e1c58a58 Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ... 
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt patches for 5.14-rc1.

  Nothing major here just lots of little changes for new hardware and
  features. Highlights are:

   - more USB 4 support added to the thunderbolt core

   - build warning fixes all over the place

   - usb-serial driver updates and new device support

   - mtu3 driver updates

   - gadget driver updates

   - dwc3 driver updates

   - dwc2 driver updates

   - isp1760 host driver updates

   - musb driver updates

   - lots of other tiny things.

  Full details are in the shortlog.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
  phy: qcom-qusb2: Add configuration for SM4250 and SM6115
  dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
  dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
  USB: cdc-acm: blacklist Heimann USB Appset device
  usb: xhci-mtk: allow multiple Start-Split in a microframe
  usb: ftdi-elan: remove redundant continue statement in a while-loop
  usb: class: cdc-wdm: return the correct errno code
  xhci: remove redundant continue statement
  usb: dwc3: Fix debugfs creation flow
  usb: gadget: hid: fix error return code in hid_bind()
  usb: gadget: eem: fix echo command packet response issue
  usb: gadget: f_hid: fix endianness issue with descriptors
  Revert "USB: misc: Add onboard_usb_hub driver"
  Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
  Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
  Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
  xhci: solve a double free problem while doing s4
  xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
  xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
  xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
  ...
phy: qcom-qusb2: Add configuration for SM4250 and SM6115 2021-06-24T12:31:56+00:00 Iskren Chernev iskren.chernev@gmail.com 2021-06-22T20:32:40+00:00 7756f1d6369e61d1cc47d6e51619d1e1d1681a2e The SM4250 and SM6115 uses the same register layout as MSM8996, but the tune sequence is a bit different. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210622203240.559979-4-iskren.chernev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The SM4250 and SM6115 uses the same register layout as MSM8996, but the
tune sequence is a bit different.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210622203240.559979-4-iskren.chernev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: qcom-qmp: remove redundant error of clock bulk 2021-05-31T08:38:58+00:00 Chunfeng Yun chunfeng.yun@mediatek.com 2021-05-17T05:37:21+00:00 4bbe33f66d7da985ab985d5092328cb3061b7a97 There is error log in clk_bulk_prepare/enable() Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621229841-22984-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
There is error log in clk_bulk_prepare/enable()

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1621229841-22984-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>