linux-stable.git/drivers/phy/qualcomm, branch linux-5.6.y

Merge tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2020-01-17T06:52:26+00:00

Kishon writes:

phy: for 5.6

*) Add support in PHY core to create link between PHY consumer and PHY
   provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
   configurations to be used between DisplayPort controller and
   DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
   TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
   J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
   Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
   occasional transaction failures, fix USB driver from crashing in
   Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
   display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
   fixing Kconfig indentation, duplicate writes in drivers etc.,

Signed-off-by: Kishon Vijay Abraham I 

* tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits)
  dt-bindings: phy: Add PHY_TYPE_DP definition
  phy: ti: j721e-wiz: Fix return value check in wiz_probe()
  dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema
  phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE
  phy: ti: j721e-wiz: Manage typec-gpio-dir
  dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  phy: cadence: Sierra: add phy_reset hook
  phy: cadence: Sierra: remove redundant initialization of pointer regmap
  phy: Add DisplayPort configuration options
  phy: Enable compile testing for some of drivers
  phy: mediatek: Fix Kconfig indentation
  phy: intel-lgm-emmc: Add support for eMMC PHY
  dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
  phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
  dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
  phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
  phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
  phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
  phy: cadence: Sierra: Check for PLL lock during PHY power on
  phy: cadence: Sierra: Get reset control "array" for each link
  ...

phy: qcom-qmp: Add SW reset register

2020-01-08T07:28:06+00:00

For V4 QMP UFS Phy, we need to assert reset bits, configure the phy and
then deassert it, so add the QPHY_SW_RESET register which does this.

Signed-off-by: Vinod Koul 
Reviewed-by: Manu Gautam 
Reviewed-by: Can Guo 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-qmp: remove no_pcs_sw_reset for sm8150

2020-01-08T07:28:06+00:00

SM8150 QMPY phy for UFS and onwards the PHY_SW_RESET is present in PHY's
PCS register so we should not mark no_pcs_sw_reset for sm8150 and
onwards

Signed-off-by: Vinod Koul 
Reviewed-by: Manu Gautam 
Reviewed-by: Can Guo 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-qmp: remove duplicate powerdown write

2020-01-08T07:28:06+00:00

We already write to QPHY_POWER_DOWN_CONTROL in qcom_qmp_phy_com_init()
before invoking qcom_qmp_phy_configure() so remove the duplicate write.

Signed-off-by: Vinod Koul 
Reviewed-by: Manu Gautam 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-qmp: Use register defines

2020-01-08T07:28:06+00:00

We already define register offsets so use them in register layout.

Signed-off-by: Vinod Koul 
Reviewed-by: Manu Gautam 
Reviewed-by: Can Guo 
Signed-off-by: Kishon Vijay Abraham I

phy: qualcomm: Adjust indentation in read_poll_timeout

2020-01-08T07:28:06+00:00

Clang warns:

../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
                 usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
                 ^
../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous
statement is here
                if (readl_relaxed(addr) & mask)
                ^
1 warning generated.

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY")
Link: https://github.com/ClangBuiltLinux/linux/issues/816
Signed-off-by: Nathan Chancellor 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-qmp: Increase PHY ready timeout

2019-12-20T11:43:59+00:00

It's typical for the QHP PHY to take slightly above 1ms to initialize,
so increase the timeout of the PHY ready check to 10ms - as already done
in the downstream PCIe driver.

Signed-off-by: Bjorn Andersson 
Tested-by: Evan Green 
Tested-by: Vinod Koul 
Signed-off-by: Vinod Koul 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-qmp: Use the correct style for SPDX License Identifier

2019-12-20T11:30:45+00:00

This patch corrects the SPDX License Identifier style in
header files related to PHY drivers for Qualcomm platforms.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches 
Signed-off-by: Nishad Kamdar 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-usb-hs: Fix extcon double register after power cycle

2019-10-31T11:24:01+00:00

Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().

This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:

	double register detected
	WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0
	Call trace:
	 ...
	 extcon_register_notifier+0x74/0xb8
	 devm_extcon_register_notifier+0x54/0xb8
	 qcom_usb_hs_phy_power_on+0x1fc/0x208
	 ...

... and USB stops working after plugging the cable out and in
another time.

The easiest way to fix this is to make a partial revert of
commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.

Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Stephan Gerhold 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-qmp: Add SM8150 QMP UFS PHY support

2019-10-25T12:28:19+00:00

SM8150 UFS PHY is v4 of QMP phy. Add support for V4 QMP phy register
defines and support for SM8150 QMP UFS PHY.

Signed-off-by: Vinod Koul 
Reviewed-by: Bjorn Andersson 
Reviewed-by: Stephen Boyd 
Signed-off-by: Kishon Vijay Abraham I