linux-stable.git/drivers/phy/broadcom/Kconfig, branch linux-5.4.y

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

phy: sr-usb: Add Stingray USB PHY driver

2019-04-17T08:42:48+00:00

USB PHY driver supports two types of stingray USB PHYs
 - Type 1 is a combo PHY contains two PHYs, one SS and one HS.
 - Type 2 is a single HS PHY.

These two PHY versons support both Generic xHCI host controller driver
and BDC Broadcom device controller driver.

Signed-off-by: Srinath Mannam 
Signed-off-by: Kishon Vijay Abraham I

phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs

2018-09-25T10:40:08+00:00

Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same
Broadcom SATA PHY that other SoCs are using, make it possible to select
that driver on these platforms.

Signed-off-by: Florian Fainelli 
Signed-off-by: Kishon Vijay Abraham I

phy: bcm-sr-pcie: Add Stingray PCIe PHY driver

2018-07-10T08:15:10+00:00

Add Stingray PCIe PHY driver for both PAXB and PAXC root complex

Signed-off-by: Ray Jui 
Signed-off-by: Kishon Vijay Abraham I

phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver

2017-10-03T06:24:54+00:00

Add a new USB Phy driver for Broadcom STB SoCs. This driver
supports Broadcom STB ARM SoCs. This driver in
combination with the Broadcom STB ohci, ehci and xhci
drivers will enable USB1.1, USB2.0 and USB3.0 support.
This Phy driver also supports the Broadcom BDC gadget
driver.

Signed-off-by: Al Cooper 
Signed-off-by: Kishon Vijay Abraham I

phy: bcm-ns-usb3: fix MDIO_BUS dependency

2017-07-28T00:20:19+00:00

The driver attempts to 'select MDIO_DEVICE', but the code
is actually a loadable module when PHYLIB=m:

drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_mdiodev_phy_write':
phy-bcm-ns-usb3.c:(.text.bcm_ns_usb3_mdiodev_phy_write+0x28): undefined reference to `mdiobus_write'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_exit':
phy-bcm-ns-usb3.c:(.exit.text+0x18): undefined reference to `mdio_driver_unregister'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_init':
phy-bcm-ns-usb3.c:(.init.text+0x18): undefined reference to `mdio_driver_register'
phy-bcm-ns-usb3.c:(.init.text+0x38): undefined reference to `mdio_driver_unregister'

Using 'depends on MDIO_BUS' instead will avoid the link error.

Fixes: af850e14a7ae ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

phy: bcm-ns-usb3: add MDIO driver using proper bus layer

2017-06-16T07:52:26+00:00

As USB 3.0 PHY is attached to the MDIO bus this module should provide a
MDIO driver and use a proper bus layer. This is a proper (cleaner)
solution which doesn't require code to know this specific MDIO bus
details. It also allows reusing the driver with other MDIO buses.

For now keep platform device support in place. We may consider dropping
it once MDIO bindings gets used "everywhere".

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kishon Vijay Abraham I

phy: phy-bcm-ns2-usbdrd: Broadcom USB DRD PHY driver for Northstar2

2017-06-09T12:09:39+00:00

This is driver for USB DRD PHY used in Broadcom's Northstar2
SoC. The phy can be configured to be in Device mode or Host
mode based on the type of cable connected to the port. The
driver registers to  extcon framework to get appropriate
connect events for Host/Device cables connect/disconnect
states based on VBUS and ID interrupts.

Signed-off-by: Raviteja Garimella 
Signed-off-by: Kishon Vijay Abraham I

phy: Group vendor specific phy drivers

2017-06-01T09:58:33+00:00

Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correct
directory structure for phy drivers.

Signed-off-by: Vivek Gautam 
Acked-by: Heiko Stuebner 
Acked-by: Viresh Kumar 
Acked-by: Krzysztof Kozlowski 
Acked-by: Yoshihiro Shimoda 
Reviewed-by: Jaehoon Chung 
Cc: Kishon Vijay Abraham I 
Cc: David S. Miller 
Cc: Geert Uytterhoeven 
Cc: Yoshihiro Shimoda 
Cc: Guenter Roeck 
Cc: Heiko Stuebner 
Cc: Viresh Kumar 
Cc: Maxime Ripard 
Cc: Chen-Yu Tsai 
Cc: Sylwester Nawrocki 
Cc: Krzysztof Kozlowski 
Cc: Jaehoon Chung 
Cc: Stephen Boyd 
Cc: Martin Blumenstingl 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I