linux-stable.git/drivers/phy/Kconfig, branch v6.4 Linux kernel stable tree phy: xgene: Depend on ARCH_XGENE rather than plain arm64 2023-03-20T12:44:59+00:00 Mark Brown broonie@kernel.org 2023-03-06T17:05:35+00:00 84a59a314263c21de1b308abda7f7eea92da740d The X-Gene PHY driver is unlikely to be useful on a kernel without general X-Gene support enabled but currently only depends on arm64 rather than the specific platform support. Narrow the dependency to ARCH_XGENE like we do for other X-Gene specific drivers to ensure that users who have configured down the set of platforms enabled don't see the option. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230221-phy-build-deps-v1-1-7091bcbd16b0@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The X-Gene PHY driver is unlikely to be useful on a kernel without general
X-Gene support enabled but currently only depends on arm64 rather than the
specific platform support. Narrow the dependency to ARCH_XGENE like we do
for other X-Gene specific drivers to ensure that users who have configured
down the set of platforms enabled don't see the option.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-phy-build-deps-v1-1-7091bcbd16b0@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: usb: Add USB2.0 phy driver for Sunplus SP7021 2022-09-02T15:31:24+00:00 Vincent Shih vincent.sunplus@gmail.com 2022-07-25T02:44:11+00:00 99d9ccd97385208b78b3d88e756451f4b70119fc Add USB2.0 phy driver for Sunplus SP7021 Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com> Link: https://lore.kernel.org/r/1658717052-26142-2-git-send-email-vincent.sunplus@gmail.com [vkoul: remove trailing line in driver file] Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add USB2.0 phy driver for Sunplus SP7021

Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com>
Link: https://lore.kernel.org/r/1658717052-26142-2-git-send-email-vincent.sunplus@gmail.com
[vkoul: remove trailing line in driver file]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: phy-can-transceiver: Add support for setting mux 2022-04-11T14:44:10+00:00 Aswath Govindraju a-govindraju@ti.com 2022-04-08T11:13:16+00:00 e4d4371253029528c02bfb43a46c252e1c3d035f On some boards, for routing CAN signals from controller to transceiver, muxes might need to be set. Therefore, add support for setting the mux by reading the mux-states property from the device tree node. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220408111316.21189-1-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
On some boards, for routing CAN signals from controller to transceiver,
muxes might need to be set. Therefore, add support for setting the mux by
reading the mux-states property from the device tree node.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220408111316.21189-1-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: pistachio-usb: Depend on MIPS || COMPILE_TEST 2021-08-12T14:01:49+00:00 Jiaxun Yang jiaxun.yang@flygoat.com 2021-07-23T02:25:39+00:00 e238f10d8606ddb9a1728628a218c3f740b940be So it will be avilable for generic MIPS kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
So it will be avilable for generic MIPS kernel.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
phy: phy-can-transceiver: Add support for generic CAN transceiver driver 2021-06-14T05:50:17+00:00 Aswath Govindraju a-govindraju@ti.com 2021-05-10T05:10:05+00:00 a4a86d273ff1b6f7551c67908556fd91c9affd22 The driver adds support for generic CAN transceivers. Currently the modes supported by this driver are standby and normal modes for TI TCAN1042 and TCAN1043 CAN transceivers. The transceiver is modelled as a phy with pins controlled by gpios, to put the transceiver in various device functional modes. It also gets the phy attribute max_link_rate for the usage of CAN drivers. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210510051006.11393-4-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The driver adds support for generic CAN transceivers. Currently
the modes supported by this driver are standby and normal modes for TI
TCAN1042 and TCAN1043 CAN transceivers.

The transceiver is modelled as a phy with pins controlled by gpios, to put
the transceiver in various device functional modes. It also gets the phy
attribute max_link_rate for the usage of CAN drivers.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210510051006.11393-4-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: Add Sparx5 ethernet serdes PHY driver 2021-03-17T06:43:19+00:00 Steen Hegelund steen.hegelund@microchip.com 2021-02-18T16:14:50+00:00 2ff8a1eeb5aa8bb471f3756a695b8b69841eb61f Add the Microchip Sparx5 ethernet serdes PHY driver for the 6G, 10G and 25G interfaces available in the Sparx5 SoC. Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210218161451.3489955-4-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add the Microchip Sparx5 ethernet serdes PHY driver for the 6G, 10G and 25G
interfaces available in the Sparx5 SoC.

Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210218161451.3489955-4-steen.hegelund@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: USB_LGM_PHY should depend on X86 2021-02-04T08:02:53+00:00 Geert Uytterhoeven geert+renesas@glider.be 2021-01-29T13:17:53+00:00 6b46e60a6943d629d69924be3169d8f214624ab2 The Intel Lightning Mountain (LGM) USB3 USB is only present on Intel Lightning Mountain SoCs. Hence add a dependency on X86, to prevent asking the user about this driver when configuring a kernel without Intel Lightning Mountain platform support. Fixes: 1cce8f73a561c944 ("phy: Add USB3 PHY support for Intel LGM SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210129131753.2656306-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The Intel Lightning Mountain (LGM) USB3 USB is only present on Intel
Lightning Mountain SoCs.  Hence add a dependency on X86, to prevent
asking the user about this driver when configuring a kernel without
Intel Lightning Mountain platform support.

Fixes: 1cce8f73a561c944 ("phy: Add USB3 PHY support for Intel LGM SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210129131753.2656306-1-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
PHY: Ingenic: Add USB PHY driver using generic PHY framework. 2020-12-05T08:09:30+00:00 周琰杰 (Zhou Yanjie) zhouyanjie@wanyeetech.com 2020-11-16T14:19:06+00:00 31de313dfdcf6971b0a1c30f86eabaa1eede74b3 Used the generic PHY framework API to create the PHY, this driver supoorts USB OTG PHY used in JZ4770 SoC, JZ4775 SoC, JZ4780 SoC, X1000 SoC, X1830 SoC and X2000 SoC. Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201116141906.11758-4-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Used the generic PHY framework API to create the PHY, this driver
supoorts USB OTG PHY used in JZ4770 SoC, JZ4775 SoC, JZ4780 SoC,
X1000 SoC, X1830 SoC and X2000 SoC.

Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201116141906.11758-4-zhouyanjie@wanyeetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: fix USB_LGM_PHY warning & build errors 2020-09-22T14:11:43+00:00 Randy Dunlap rdunlap@infradead.org 2020-09-17T17:51:47+00:00 9b1e52137b221413bce145f8b6e4258900e575c3 Fix a Kconfig warning that is causing lots of build errors when USB_SUPPORT is not set. USB_PHY depends on USB_SUPPORT but "select" doesn't care about dependencies, so this driver should also depend on USB_SUPPORT. It should not select USB_SUPPORT. WARNING: unmet direct dependencies detected for USB_PHY Depends on [n]: USB_SUPPORT [=n] Selected by [m]: - USB_LGM_PHY [=m] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Li Yin <yin1.li@intel.com> Cc: Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/d1dd0ddd-3143-5777-1c63-195e1a32f237@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Fix a Kconfig warning that is causing lots of build errors
when USB_SUPPORT is not set.

USB_PHY depends on USB_SUPPORT but "select" doesn't care about
dependencies, so this driver should also depend on USB_SUPPORT.
It should not select USB_SUPPORT.

WARNING: unmet direct dependencies detected for USB_PHY
  Depends on [n]: USB_SUPPORT [=n]
  Selected by [m]:
  - USB_LGM_PHY [=m]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Li Yin <yin1.li@intel.com>
Cc: Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/d1dd0ddd-3143-5777-1c63-195e1a32f237@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: Add USB3 PHY support for Intel LGM SoC 2020-09-11T11:42:49+00:00 Ramuthevar Vadivel Murugan vadivel.muruganx.ramuthevar@linux.intel.com 2020-08-28T02:23:12+00:00 1cce8f73a561c944ba69419044222a6797b547d2 Add support for USB PHY on Intel LGM SoC. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20200828022312.52724-3-vadivel.muruganx.ramuthevar@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add support for USB PHY on Intel LGM SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20200828022312.52724-3-vadivel.muruganx.ramuthevar@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>