linux-stable.git/drivers/phy/Kconfig, branch v4.7

Merge tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2016-05-21T04:12:25+00:00

Pull USB updates from Greg KH:
 "Here's the big pull request for USB and PHY drivers for 4.7-rc1

  Full details in the shortlog, but it's the normal major gadget driver
  updates, phy updates, new usbip code, as well as a bit of lots of
  other stuff.

  All have been in linux-next with no reported issues"

* tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits)
  USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support
  USB: serial: fix minor-number allocation
  USB: serial: quatech2: fix use-after-free in probe error path
  USB: serial: mxuport: fix use-after-free in probe error path
  USB: serial: keyspan: fix debug and error messages
  USB: serial: keyspan: fix URB unlink
  USB: serial: keyspan: fix use-after-free in probe error path
  USB: serial: io_edgeport: fix memory leaks in probe error path
  USB: serial: io_edgeport: fix memory leaks in attach error path
  usb: Remove unnecessary space before operator ','.
  usb: Remove unnecessary space before open square bracket.
  USB: FHCI: avoid redundant condition
  usb: host: xhci-rcar: Avoid long wait in xhci_reset()
  usb/host/fotg210: remove dead code in create_sysfs_files
  usb: wusbcore: Do not initialise statics to 0.
  usb: wusbcore: Remove space before ',' and '(' .
  USB: serial: cp210x: clean up CRTSCTS flag code
  USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code
  USB: serial: cp210x: fix hardware flow-control disable
  USB: serial: option: add even more ZTE device ids
  ...

Merge tag 'phy-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing

2016-05-03T21:49:46+00:00

Kishon writes:

phy: for 4.7

*) Add a new PHY driver for USB2 PHY on Northstar SoC
*) Add support for Broadcom NS2 SATA3 PHY in existing
   Broadcom SATA3 PHY driver
*) Add support for MIPI DPHYs in Exynos5420-compatible
   (5420, 5422 and 5800) and Exynos5433 SoCs
*) Add support for USB3 PHY on mt2701
*) Add extcon support for Renesas R-car USB2 PHY driver
*) Misc cleanups

Signed-off-by: Kishon Vijay Abraham I

phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar

2016-04-30T14:42:28+00:00

Northstar is a family of SoCs used in home routers. They have USB 2.0
and 3.0 controllers with PHYs that need to be properly initialized.
This driver provides PHY init support in a generic way and can be bound
with an EHCI controller driver.
There are (just a few) registers being defined in bcma header. It's
because DMU/CRU registers will be also needed in other drivers. We will
need them e.g. in PCIe controller/PHY driver and at some point probably
in clock driver for BCM53573 chipset. By using include/linux/bcma/ we
avoid code duplication.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kishon Vijay Abraham I

phy: phy-mt65xx-usb3: add support for mt2701 platform

2016-04-30T14:42:27+00:00

Add a new OF device ID for mt2701

Some register settings to avoid RX sensitivity level degradation
which may arise on mt8173 platform are separated from other
platforms.

Signed-off-by: Chunfeng Yun 
Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2: add extcon support

2016-04-30T14:42:26+00:00

This patch adds extcon support for otg related channel.

Signed-off-by: Yoshihiro Shimoda 
Reviewed-by: Chanwoo Choi 
Signed-off-by: Kishon Vijay Abraham I

phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver

2016-04-30T14:42:24+00:00

This patch adds support for Broadcom NS2 SATA3 PHY in existing
Broadcom SATA3 PHY driver.

Signed-off-by: Anup Patel 
Acked-by: Florian Fainelli 
Signed-off-by: Kishon Vijay Abraham I

phy: Add Tegra XUSB pad controller support

2016-04-29T14:44:47+00:00

Add a new driver for the XUSB pad controller found on NVIDIA Tegra SoCs.
This hardware block used to be exposed as a pin controller, but it turns
out that this isn't a good fit. The new driver and DT binding much more
accurately describe the hardware and are more flexible in supporting new
SoC generations.

Acked-by: Kishon Vijay Abraham I 
Signed-off-by: Thierry Reding

phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver

2016-04-29T09:10:07+00:00

Currently, we have a common SATA3 PHY driver for all Broadcom
STB SoCs. This driver can be extended and re-used for Broadcom
iProc SoCs having same SATA3 PHY.

This patch renames existing Broadcom STB SATA3 PHY driver to
common Broadcom SATA3 PHY driver to share this PHY driver across
Broadcom SoCs.

Signed-off-by: Anup Patel 
Acked-by: Florian Fainelli 
Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS

2016-04-29T09:10:07+00:00

Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
A now redundant dependency on OF is also dropped.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.

Signed-off-by: Simon Horman 
Acked-by: Yoshihiro Shimoda 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Kishon Vijay Abraham I

usb: common: rework CONFIG_USB_COMMON logic

2016-04-18T12:23:36+00:00

The phy-am335x driver selects 'USB_COMMON', but all other drivers
use 'depends on' for that symbol, and it depends on USB || USB_GADGET
itself, which causes a Kconfig warning:

warning: (AM335X_PHY_USB) selects USB_COMMON which has unmet direct dependencies (USB_SUPPORT && (USB || USB_GADGET))

As suggested by Felipe Balbi, this turns the logic around, and makes
'USB_COMMON' selected by everything else that needs it, so we can
remove the dependencies.

Fixes: 59f042f644c5 ("usb: phy: phy-am335x: bypass first VBUS sensing for host-only mode")
Signed-off-by: Arnd Bergmann 
Acked-by: Felipe Balbi 
Reviewed-by: Peter Chen 
Signed-off-by: Felipe Balbi