linux-stable.git/drivers/phy/Kconfig, branch v4.6

phy: Fix armada375 compile test build on UM

2016-03-01T11:43:51+00:00

The phy-armada375-usb2 driver uses IOMEM functions so COMPILE_TEST && OF
build failed with:

drivers/built-in.o: In function `armada375_usb_phy_probe':
phy-armada375-usb2.c:(.text+0x121d): undefined reference to
`devm_ioremap_resource'

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Kishon Vijay Abraham I

phy: Add driver for rockchip Display Port PHY

2016-03-01T11:43:50+00:00

Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.

Signed-off-by: Yakir Yang 
Reviewed-by: Heiko Stuebner 
Signed-off-by: Kishon Vijay Abraham I

phy: add a driver for the Rockchip SoC internal eMMC PHY

2016-03-01T11:43:50+00:00

This patch to add a generic PHY driver for ROCKCHIP eMMC PHY.
Access the PHY via registers provided by GRF (general register
files) module.

Signed-off-by: Shawn Lin 
Signed-off-by: Kishon Vijay Abraham I

phy: Restrict phy-hi6220-usb to HiSilicon arm64

2016-02-03T06:25:28+00:00

The HiSilicon Hi6220 USB PHY is available in HiSilicon Hi6220 SoCs only.
Restrict it to HiSilicon arm64, unless compile-testing.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Kishon Vijay Abraham I

phy: phy_brcmstb_sata: add support for MIPS-based platforms

2015-12-20T11:58:33+00:00

The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.

This new compatible string, "brcm,bcm7425-sata-phy", may be used for
most MIPS-based platforms of 40nm process technology.

Signed-off-by: Jaedon Shin 
Acked-by: Rob Herring 
Tested-by: Florian Fainelli 
Acked-by: Brian Norris 
Signed-off-by: Kishon Vijay Abraham I

phy: add phy-hi6220-usb

2015-12-20T09:51:38+00:00

Support hi6220 use phy for HiKey board

Acked-by: Rob Herring 
Signed-off-by: Zhangfei Gao 
Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver

2015-12-20T09:51:37+00:00

This patch adds support for R-Car generation 3 USB2 PHY driver.
This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared
with the HSUSB (USB2.0 peripheral) device. And each channel has
independent registers about the PHYs.

So, the purpose of this driver is:
 1) initializes some registers of SoC specific to use the
    {ehci,ohci}-platform driver.

 2) detects id pin to select host or peripheral on the channel 0.

For now, this driver only supports 1) above.

Signed-off-by: Yoshihiro Shimoda 
Acked-by: Rob Herring 
Signed-off-by: Kishon Vijay Abraham I

phy: sun9i-usb: add USB dependency

2015-12-03T06:25:41+00:00

The sun9i usb phy driver calls of_usb_get_phy_mode(), which is not
available if USB is disabled:

drivers/built-in.o: In function `sun9i_usb_phy_probe':
:(.text+0x7fb0): undefined reference to `of_usb_get_phy_mode'

This adds a dependency to avoid the randconfig build errors.

Signed-off-by: Arnd Bergmann 
Fixes: 9c3b44302636 ("phy: Add driver to support individual USB PHYs on sun9i")
Acked-by: Chen-Yu Tsai 
Signed-off-by: Kishon Vijay Abraham I

phy: cygnus: pcie: Add Cygnus PCIe PHY support

2015-10-06T14:51:48+00:00

This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
on Cygnus

Signed-off-by: Ray Jui 
Reviewed-by: Arun Parameswaran 
Reviewed-by: JD (Jiandong) Zheng 
Reviewed-by: Scott Branden 
Signed-off-by: Kishon Vijay Abraham I

phy: add usb3.0 phy driver for mt65xx SoCs

2015-10-06T14:51:47+00:00

support usb3.0 phy of mt65xx SoCs

Signed-off-by: Chunfeng Yun 
Signed-off-by: Kishon Vijay Abraham I