linux-stable.git/drivers/perf, branch v5.7.7

drivers/perf: hisi: Fix wrong value for all counters enable

2020-06-24T15:49:07+00:00

[ Upstream commit 961abd78adcb4c72c343fcd9f9dc5e2ebbe9b448 ]

In L3C uncore PMU drivers, bit16 is used to control all counters enable &
disable. Wrong value is given in the driver and its default value is 1'b1,
it can work because each PMU counter has its own control bits too.
Let's fix the wrong value.

Fixes: 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver")
Signed-off-by: Shaokun Zhang 
Cc: Will Deacon 
Cc: Mark Rutland 
Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

drivers/perf: hisi: Fix typo in events attribute array

2020-06-22T07:32:36+00:00

[ Upstream commit 88562f06ebf56587788783e5420f25fde3ca36c8 ]

Fix up one typo: wr_dr_64b -> wr_ddr_64b.

Fixes: 2bab3cf9104c ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver")
Signed-off-by: Shaokun Zhang 
Cc: Will Deacon 
Cc: Mark Rutland 
Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

pmu/smmuv3: Clear IRQ affinity hint on device removal

2020-06-22T07:32:23+00:00

[ Upstream commit 10f6cd2af21bb44faab31a50ec3361d7649e5a39 ]

Currently when trying to remove the SMMUv3 PMU module we get a
WARN_ON_ONCE from free_irq(), because the affinity hint set during probe
hasn't been properly cleared.

[  238.878383] WARNING: CPU: 0 PID: 175 at kernel/irq/manage.c:1744 free_irq+0x324/0x358
...
[  238.897263] Call trace:
[  238.897998]  free_irq+0x324/0x358
[  238.898792]  devm_irq_release+0x18/0x28
[  238.899189]  release_nodes+0x1b0/0x228
[  238.899984]  devres_release_all+0x38/0x60
[  238.900779]  device_release_driver_internal+0x10c/0x1d0
[  238.901574]  driver_detach+0x50/0xe0
[  238.902368]  bus_remove_driver+0x5c/0xd8
[  238.903448]  driver_unregister+0x30/0x60
[  238.903958]  platform_driver_unregister+0x14/0x20
[  238.905075]  arm_smmu_pmu_exit+0x1c/0xecc [arm_smmuv3_pmu]
[  238.905547]  __arm64_sys_delete_module+0x14c/0x260
[  238.906342]  el0_svc_common.constprop.0+0x74/0x178
[  238.907355]  do_el0_svc+0x24/0x90
[  238.907932]  el0_sync_handler+0x11c/0x198
[  238.908979]  el0_sync+0x158/0x180

Just like the other perf drivers, clear the affinity hint before
releasing the device.

Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker 
Link: https://lore.kernel.org/r/20200422084805.237738-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2020-03-31T17:05:01+00:00

Pull arm64 updates from Catalin Marinas:
 "The bulk is in-kernel pointer authentication, activity monitors and
  lots of asm symbol annotations. I also queued the sys_mremap() patch
  commenting the asymmetry in the address untagging.

  Summary:

   - In-kernel Pointer Authentication support (previously only offered
     to user space).

   - ARM Activity Monitors (AMU) extension support allowing better CPU
     utilisation numbers for the scheduler (frequency invariance).

   - Memory hot-remove support for arm64.

   - Lots of asm annotations (SYM_*) in preparation for the in-kernel
     Branch Target Identification (BTI) support.

   - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
     PMU init callbacks, support for new DT compatibles.

   - IPv6 header checksum optimisation.

   - Fixes: SDEI (software delegated exception interface) double-lock on
     hibernate with shared events.

   - Minor clean-ups and refactoring: cpu_ops accessor,
     cpu_do_switch_mm() converted to C, cpufeature finalisation helper.

   - sys_mremap() comment explaining the asymmetric address untagging
     behaviour"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  mm/mremap: Add comment explaining the untagging behaviour of mremap()
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed
  arm64: move kimage_vaddr to .rodata
  arm64: use mov_q instead of literal ldr
  arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
  lkdtm: arm64: test kernel pointer authentication
  arm64: compile the kernel with ptrauth return address signing
  kconfig: Add support for 'as-option'
  arm64: suspend: restore the kernel ptrauth keys
  arm64: __show_regs: strip PAC from lr in printk
  arm64: unwind: strip PAC from kernel addresses
  arm64: mask PAC bits of __builtin_return_address
  arm64: initialize ptrauth keys for kernel booting task
  arm64: initialize and switch ptrauth kernel keys
  arm64: enable ptrauth earlier
  arm64: cpufeature: handle conflicts based on capability
  arm64: cpufeature: Move cpu capability helpers inside C file
  ...

perf: arm-ccn: Use scnprintf() for robustness

2020-03-17T22:45:56+00:00

snprintf() is a hard-to-use function, it's especially difficult to use
it for concatenating substrings in a buffer with a limited size.
Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position easily.  Although the current code doesn't actually overflow
the buffer, it's an incorrect usage.

This patch replaces such snprintf() calls with a safer version,
scnprintf().

Acked-by: Mark Rutland 
Signed-off-by: Takashi Iwai 
Signed-off-by: Will Deacon

drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer

2020-03-02T12:07:35+00:00

Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc()
by checking for a 0 'gicc->performance_interrupt' value instead.

Signed-off-by: Liguang Zhang 
Signed-off-by: Will Deacon

drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition

2020-03-02T12:07:19+00:00

When disabling a counter from ddr_perf_event_stop(), the counter value
is reset to 0 at the same time.

Preserve the counter value by performing a read-modify-write of the
PMU register and clearing only the enable bit.

Signed-off-by: Joakim Zhang 
Signed-off-by: Will Deacon

perf: arm_spe: Remove unnecessary zero check on 'nr_pages'

2020-03-02T11:27:21+00:00

We already check that the 'nr_pages' is > 2, so there's no need to check
that it's != 0 later on.

Signed-off-by: Liguang Zhang 
Signed-off-by: Will Deacon

perf/smmuv3: Use platform_get_irq_optional() for wired interrupt

2020-02-10T18:14:46+00:00

Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:

root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[   59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[   59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[   59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[   59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[   59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[   59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[   59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[   60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found

Use platform_get_irq_optional() to silence the warning.

If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.

Reviewed-by: Robin Murphy 
Signed-off-by: John Garry 
Signed-off-by: Will Deacon

perf/imx_ddr: Fix cpu hotplug state cleanup

2020-01-15T12:48:40+00:00

This driver allocates a dynamic cpu hotplug state but never releases it.
If reloaded in a loop it will quickly trigger a WARN message:

	"No more dynamic states available for CPU hotplug"

Fix by calling cpuhp_remove_multi_state on remove like several other
perf pmu drivers.

Also fix the cleanup logic on probe error paths: add the missing
cpuhp_remove_multi_state call and properly check the return value from
cpuhp_state_add_instant_nocalls.

Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Acked-by: Joakim Zhang 
Signed-off-by: Leonard Crestez 
Signed-off-by: Will Deacon