Pull PCI fixes from Bjorn Helgaas:

 - Move to a shared PCI git tree (Bjorn Helgaas)

 - Add Krzysztof Wilczyński as another PCI maintainer (Lorenzo
   Pieralisi)

 - Revert a couple ASPM patches to fix suspend/resume regressions (Bjorn
   Helgaas)

* tag 'pci-v6.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI/ASPM: Refactor L1 PM Substates Control Register programming"
  Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"
  MAINTAINERS: Promote Krzysztof to PCI controller maintainer
  MAINTAINERS: Move to shared PCI tree

This reverts commit 5e85eba6f50dc288c22083a7e213152bcc4b8208.

Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates
Control Register programming") broke suspend/resume on a Tuxedo
Infinitybook S 14 v5, which seems to use a Clevo L140CU Mainboard.

The main symptom is:

  iwlwifi 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
  nvme 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible

and the machine is only partially usable after resume.  It can't run dmesg
and can't do a clean reboot.  This happens on every suspend/resume cycle.

Revert 5e85eba6f50d until we can figure out the root cause.

Fixes: 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates Control Register programming")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>

This reverts commit 4ff116d0d5fd8a025604b0802d93a2d5f4e465d1.

Tasev Nikola and Mark Enriquez reported that resume from suspend was broken
in v6.1-rc1.  Tasev bisected to a47126ec29f5 ("PCI/PTM: Cache PTM
Capability offset"), but we can't figure out how that could be related.

Mark saw the same symptoms and bisected to 4ff116d0d5fd ("PCI/ASPM: Save L1
PM Substates Capability for suspend/resume"), which does have a connection:
it restores L1 Substates configuration while ASPM L1 may be enabled:

  pci_restore_state
    pci_restore_aspm_l1ss_state
      aspm_program_l1ss
        pci_write_config_dword(PCI_L1SS_CTL1, ctl1)         # L1SS restore
    pci_restore_pcie_state
      pcie_capability_write_word(PCI_EXP_LNKCTL, cap[i++])  # L1 restore

which is a problem because PCIe r6.0, sec 5.5.4, requires that:

  If setting either or both of the enable bits for ASPM L1 PM
  Substates, both ports must be configured as described in this
  section while ASPM L1 is disabled.

Separately, Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1
PM Substates Control Register programming") broke suspend/resume, and it
depends on 4ff116d0d5fd.

Revert 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") to fix the resume issue and enable revert of 5e85eba6f50d
to fix the issue Thomas reported.

Note that reverting 4ff116d0d5fd means L1 Substates config may be lost on
suspend/resume.  As far as we know the system will use more power but will
still *work* correctly.

Fixes: 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be>
Reported-by: Mark Enriquez <enriquezmark36@gmail.com>
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Mark Enriquez <enriquezmark36@gmail.com>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>

Pull pci fixes from Bjorn Helgaas:

 - Work around apparent firmware issue that made Linux reject MMCONFIG
   space, which broke PCI extended config space (Bjorn Helgaas)

 - Fix CONFIG_PCIE_BT1 dependency due to mid-air collision between a
   PCI_MSI_IRQ_DOMAIN -> PCI_MSI change and addition of PCIE_BT1 (Lukas
   Bulwahn)

* tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
  x86/pci: Simplify is_mmconf_reserved() messages
  PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN

Pull xen fixes from Juergen Gross:

 - two cleanup patches

 - a fix of a memory leak in the Xen pvfront driver

 - a fix of a locking issue in the Xen hypervisor console driver

* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pvcalls: free active map buffer on pvcalls_front_free_map
  hvc/xen: lock console list traversal
  x86/xen: Remove the unused function p2m_index()
  xen: make remove callback of xen driver void returned

a474d3fbe287 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed
PCI_MSI_IRQ_DOMAIN and changed all references to refer to PCI_MSI instead.

ba6ed462dcf4 ("PCI: dwc: Add Baikal-T1 PCIe controller support")
independently added PCIE_BT1, depending on PCI_MSI_IRQ_DOMAIN.

Both commits appeared in v6.2-rc1, so the latter missed the conversion from
PCI_MSI_IRQ_DOMAIN to PCI_MSI.  Update PCIE_BT1 to depend on PCI_MSI
instead.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20221215103452.23131-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

Pull phy updates from Vinod Koul:
 "This tme we have again a big pile of qcom-qmp-* changes, one new
  driver and bunch of new hardware support.

  New hardware support:

   - Allwinner H616 USB PHY and A100 DPHY support

   - TI J721s2, J784s4 and J721e support

   - Freescale i.MX8MP PCIe PHY support

   - New driver for Renesas Ethernet SERDES supporting R-Car S4-8

   - Qualcomm SM8450 PCIe1 PHY support in EP mode

   - Qualcomm SC8280XP PCIe PHY support (including x4 mode)

   - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings

  Updates:

   - A big pile of updates on qcom-qmp-* drivers following the driver
     split and reorganization merged earlier

   - Phy order of API calls documentation update"

* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
  phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
  dt-bindings: phy-j721e-wiz: add j721s2 compatible string
  phy: use devm_platform_get_and_ioremap_resource()
  phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
  phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
  phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
  phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
  dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
  dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
  phy: qcom-qmp-pcie: drop redundant clock allocation
  phy: qcom-qmp-usb: drop redundant clock allocation
  phy: qcom-qmp: drop unused type header
  phy: qcom-qmp-usb: drop sc8280xp reference-clock source
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
  phy: qcom-qmp-combo: add support for updated sc8280xp binding
  phy: qcom-qmp-combo: rename DP_PHY register pointer
  phy: qcom-qmp-combo: rename common-register pointers
  phy: qcom-qmp-combo: clean up DP clock callbacks
  phy: qcom-qmp-combo: separate clock and provider registration
  phy: qcom-qmp-combo: add clock registration helper
  ...

Since commit fc7a6209d571 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.

This change is for xen bus based drivers.

Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <jgross@suse.com>

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
     make more things static.

   - Make portdrv bind to Switch Ports that have AER. Previously, if
     these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
     the Ports couldn't be suspended to low-power states. AER on these
     Ports doesn't use interrupts, and the AER driver doesn't need to
     claim them.

   - Assign PCI domain IDs using ida_alloc(), which makes host bridge
     add/remove work better.

  Resource management:

   - To work better with recent BIOSes that use EfiMemoryMappedIO for
     PCI host bridge apertures, remove those regions from the E820 map
     (E820 entries normally prevent us from allocating BARs). In v5.19,
     we added some quirks to disable E820 checking, but that's not very
     maintainable. EfiMemoryMappedIO means the OS needs to map the
     region for use by EFI runtime services; it shouldn't prevent OS
     from using it.

  PCIe native device hotplug:

   - Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
     PCIe tunneling depends on native PCIe hotplug.

   - Enable Command Completed Interrupt only if supported to avoid user
     confusion from lspci output that says this is enabled but not
     supported.

   - Prevent pciehp from binding to Switch Upstream Ports; this happened
     because of interaction with acpiphp and caused devices below the
     Upstream Port to disappear.

  Power management:

   - Convert AGP drivers to generic power management. We hope to remove
     legacy power management from the PCI core eventually.

  Virtualization:

   - Fix pci_device_is_present(), which previously always returned
     "false" for VFs, causing virtio hangs when unbinding the driver.

  Miscellaneous:

   - Convert drivers to gpiod API to prepare for dropping some legacy
     code.

   - Fix DOE fencepost error for the maximum data object length.

  Baikal-T1 PCIe controller driver:

   - Add driver and DT bindings.

  Broadcom STB PCIe controller driver:

   - Enable Multi-MSI.

   - Delay 100ms after PERST# deassert to allow power and clocks to
     stabilize.

   - Configure Read Completion Boundary to 64 bytes.

  Freescale i.MX6 PCIe controller driver:

   - Initialize PHY before deasserting core reset to fix a regression in
     v6.0 on boards where the PHY provides the reference.

   - Fix imx6sx and imx8mq clock names in DT schema.

  Intel VMD host bridge driver:

   - Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
     SSDs in VT-d pass-through scenarios.

   - Disable MSI remapping, which gets re-enabled by firmware during
     suspend/resume.

  MediaTek PCIe Gen3 controller driver:

   - Add MT7986 and MT8195 support.

  Qualcomm PCIe controller driver:

   - Add SC8280XP/SA8540P basic interconnect support.

  Rockchip DesignWare PCIe controller driver:

   - Base DT schema on common Synopsys schema.

  Synopsys DesignWare PCIe core:

   - Collect DT items shared between Root Port and Endpoint (PERST GPIO,
     PHY info, clocks, resets, link speed, number of lanes, number of
     iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.

   - Add dma-ranges support for Root Ports and Endpoints.

   - Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
     reduce code duplication.

   - Add generic names for clocks and resets to encourage more
     consistent naming across drivers using DesignWare IP.

   - Stop advertising PTM Responder role for Endpoints, which aren't
     allowed to be responders.

  TI J721E PCIe driver:

   - Add j721s2 host mode ID to DT schema.

   - Add interrupt properties to DT schema.

  Toshiba Visconti PCIe controller driver:

   - Fix interrupts array max constraints in DT schema"

* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
  x86/PCI: Use pr_info() when possible
  x86/PCI: Fix log message typo
  x86/PCI: Tidy E820 removal messages
  PCI: Skip allocate_resource() if too little space available
  efi/x86: Remove EfiMemoryMappedIO from E820 map
  PCI/portdrv: Allow AER service only for Root Ports & RCECs
  PCI: xilinx-nwl: Fix coding style violations
  PCI: mvebu: Switch to using gpiod API
  PCI: pciehp: Enable Command Completed Interrupt only if supported
  PCI: aardvark: Switch to using devm_gpiod_get_optional()
  dt-bindings: PCI: mediatek-gen3: add support for mt7986
  dt-bindings: PCI: mediatek-gen3: add SoC based clock config
  dt-bindings: PCI: qcom: Allow 'dma-coherent' property
  PCI: mt7621: Add sentinel to quirks table
  PCI: vmd: Fix secondary bus reset for Intel bridges
  PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
  PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
  PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
  PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
  PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
  ...

Pull iommufd implementation from Jason Gunthorpe:
 "iommufd is the user API to control the IOMMU subsystem as it relates
  to managing IO page tables that point at user space memory.

  It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
  container) which is the VFIO specific interface for a similar idea.

  We see a broad need for extended features, some being highly IOMMU
  device specific:
   - Binding iommu_domain's to PASID/SSID
   - Userspace IO page tables, for ARM, x86 and S390
   - Kernel bypassed invalidation of user page tables
   - Re-use of the KVM page table in the IOMMU
   - Dirty page tracking in the IOMMU
   - Runtime Increase/Decrease of IOPTE size
   - PRI support with faults resolved in userspace

  Many of these HW features exist to support VM use cases - for instance
  the combination of PASID, PRI and Userspace IO Page Tables allows an
  implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
  Dirty tracking enables VM live migration with SRIOV devices and PASID
  support allow creating "scalable IOV" devices, among other things.

  As these features are fundamental to a VM platform they need to be
  uniformly exposed to all the driver families that do DMA into VMs,
  which is currently VFIO and VDPA"

For more background, see the extended explanations in Jason's pull request:

  https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
  iommufd: Change the order of MSI setup
  iommufd: Improve a few unclear bits of code
  iommufd: Fix comment typos
  vfio: Move vfio group specific code into group.c
  vfio: Refactor dma APIs for emulated devices
  vfio: Wrap vfio group module init/clean code into helpers
  vfio: Refactor vfio_device open and close
  vfio: Make vfio_device_open() truly device specific
  vfio: Swap order of vfio_device_container_register() and open_device()
  vfio: Set device->group in helper function
  vfio: Create wrappers for group register/unregister
  vfio: Move the sanity check of the group to vfio_create_group()
  vfio: Simplify vfio_create_group()
  iommufd: Allow iommufd to supply /dev/vfio/vfio
  vfio: Make vfio_container optionally compiled
  vfio: Move container related MODULE_ALIAS statements into container.c
  vfio-iommufd: Support iommufd for emulated VFIO devices
  vfio-iommufd: Support iommufd for physical VFIO devices
  vfio-iommufd: Allow iommufd to be used in place of a container fd
  vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
  ...