Pull pci fix from Bjorn Helgaas:

 - Fix mvebu PCI enumeration regression caused by converting to
   for_each_of_range() iterator (Klaus Kudielka)

* tag 'pci-v6.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: mvebu: Fix use of for_each_of_range() iterator

5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing
"ranges"") simplified code by using the for_each_of_range() iterator, but
it broke PCI enumeration on Turris Omnia (and probably other mvebu
targets).

Issue #1:

To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(),
which resolves to of_bus_pci_get_flags(), which already returns an
IORESOURCE bit field, and NOT the original flags from the "ranges"
resource.

Then mvebu_get_tgt_attr() attempts the very same conversion again.  Remove
the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore
the intended behavior.

Issue #2:

The driver needs target and attributes, which are encoded in the raw
address values of the "/soc/pcie/ranges" resource. According to
of_pci_range_parser_one(), the raw values are stored in range.bus_addr and
range.parent_bus_addr, respectively. range.cpu_addr is a translated version
of range.parent_bus_addr, and not relevant here.

Use the correct range structure member, to extract target and attributes.
This restores the intended behavior.

Fixes: 5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"")
Reported-by: Jan Palus <jpalus@fastmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Tested-by: Jan Palus <jpalus@fastmail.com>
Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com

d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") added a
WARN_ON sanity check that child devices support MSI-X, because VMD document
says [1]:

  Intel VMD only supports MSIx Interrupts from child devices and therefore
  the BIOS must enable PCIe Hot Plug and MSIx interrups [sic].

However, the VMD device can't even tell the difference between a child
device using MSI and one using MSI-X.  Per 185a383ada2e ("x86/PCI: Add
driver for Intel Volume Management Device (VMD)"), VMD does not support
INTx interrupts, but does support child devices using either MSI or MSI-X.

Remove the sanity check to avoid the WARN_ON and allow child devices to use
MSI, reported by Ammar.

Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Link: https://cdrdv2-public.intel.com/776857/VMD_White_Paper.pdf [1]
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/aJXYhfc%2F6DfcqfqF@linux.gnuweeb.org/
Signed-off-by: Nam Cao <namcao@linutronix.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://patch.msgid.link/20250811053935.4049211-1-namcao@linutronix.de

f29861aa301c5 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
changed xilinx_pcie::msi_domain from child devices' interrupt domain to
Xilinx AXI bridge's interrupt domain.

However, xilinx_pcie_intr_handler() wasn't changed and still reads Xilinx
AXI bridge's interrupt domain from xilinx_pcie::msi_domain->parent. This
pointer is NULL now.

Update xilinx_pcie_intr_handler() to read the correct interrupt domain
pointer.

Fixes: f29861aa301c5 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250811054144.4049448-1-namcao@linutronix.de

Pull pci fix from Bjorn Helgaas:

 - Fix vmd MSI interrupt domain restructure that caused crash early in
   boot (Nam Cao)

* tag 'pci-v6.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: vmd: Fix wrong kfree() in vmd_msi_free()

vmd_msi_alloc() allocates struct vmd_irq and stashes it into
irq_data->chip_data associated with the VMD's interrupt domain.
vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and
frees it.

irq_get_chip_data() returns the chip_data associated with the top interrupt
domain. This worked in the past because VMD's interrupt domain was the top
domain.

But d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
changed the interrupt domain hierarchy so VMD's interrupt domain is not the
top domain anymore. irq_get_chip_data() now returns the chip_data at the
MSI devices' interrupt domains. It is therefore broken for vmd_msi_free()
to kfree() this chip_data.

Fix by extracting the chip_data associated with the VMD's interrupt domain.

Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/linux-pci/dfa40e48-8840-4e61-9fda-25cdb3ad81c1@panix.com/
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/ed53280ed15d1140700b96cca2734bf327ee92539e5eb68e80f5bbbf0f01@linux.gnuweeb.org/
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Tested-by: Kenneth Crudup <kenny@panix.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250807081051.2253962-1-namcao@linutronix.de

Pull powerpc fixes from Madhavan Srinivasan:

 - Fixes for several issues in the powernv PCI hotplug path

 - Fix htmldoc generation for htm.rst in toctree

 - Add jit support for load_acquire and store_release in ppc64 bpf jit

Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar

* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc64/bpf: Add jit support for load_acquire and store_release
  docs: powerpc: add htm.rst to toctree
  PCI: pnv_php: Enable third attention indicator state
  PCI: pnv_php: Fix surprise plug detection and recovery
  powerpc/eeh: Make EEH driver device hotplug safe
  powerpc/eeh: Export eeh_unfreeze_pe()
  PCI: pnv_php: Work around switches with broken presence detection
  PCI: pnv_php: Clean up allocated IRQs on unplug

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Allow built-in drivers, not just modular drivers, to use async
     initial probing (Lukas Wunner)

   - Support Immediate Readiness even on devices with no PM Capability
     (Sean Christopherson)

   - Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
     required delay between a reset and sending config requests to a
     device (Niklas Cassel)

   - Add pci_is_display() to check for "Display" base class and use it
     in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)

   - Allow 'isolated PCI functions' (multi-function devices without a
     function 0) for LoongArch, similar to s390 and jailhouse (Huacai
     Chen)

  Power control:

   - Add ability to enable optional slot clock for cases where the PCIe
     host controller and the slot are supplied by different clocks
     (Marek Vasut)

  PCIe native device hotplug:

   - Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
     misinterpreting a config read failure after a device has been
     removed (Lukas Wunner)

   - Avoid creating a useless PCIe port service device for pciehp if the
     slot is handled by the ACPI hotplug driver (Lukas Wunner)

   - Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
     ports (Lukas Wunner)

  Virtualization:

   - Save VF resizable BAR state and restore it after reset (Michał
     Winiarski)

   - Allow IOV resources (VF BARs) to be resized (Michał Winiarski)

   - Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
     (Michał Winiarski)

  Endpoint framework:

   - Add RC-to-EP doorbell support using platform MSI controller,
     including a test case (Frank Li)

   - Allow BAR assignment via configfs so platforms have flexibility in
     determining BAR usage (Jerome Brunet)

  Native PCIe controller drivers:

   - Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
     axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
     DT schema format (Rob Herring)

   - Use dev_fwnode() instead of of_fwnode_handle() to remove OF
     dependency in altera (fixes an unused variable), designware-host,
     mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
     xilinx-nwl (Jiri Slaby, Arnd Bergmann)

   - Convert aardvark, altera, brcmstb, designware-host, iproc,
     mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
     xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
     using msi_create_parent_irq_domain() instead; this makes the
     interrupt controller per-PCI device, allows dynamic allocation of
     vectors after initialization, and allows support of IMS (Nam Cao)

  APM X-Gene PCIe controller driver:

   - Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
     bits, use device-managed memory allocations, and clean things up
     (Marc Zyngier)

   - Probe xgene-msi as a standard platform driver rather than a
     subsys_initcall (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Add optional DT 'num-lanes' property and if present, use it to
     override the Maximum Link Width advertised in Link Capabilities
     (Jim Quinlan)

  Cadence PCIe controller driver:

   - Use PCIe Message routing types from the PCI core rather than
     defining private ones (Hans Zhang)

  Freescale i.MX6 PCIe controller driver:

   - Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)

   - Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
     (Richard Zhu)

   - Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
     trigger doorbel on Endpoint (Frank Li)

   - Remove apps_reset (LTSSM_EN) from
     imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
     regression on i.MX8MM (Richard Zhu)

   - Delay Endpoint link start until configfs 'start' written (Richard
     Zhu)

  Intel VMD host bridge driver:

   - Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)

  Qualcomm PCIe controller driver:

   - Add DT binding and driver support for SA8255p, which supports ECAM
     for Configuration Space access (Mayank Rana)

   - Update DT binding and driver to describe PHYs and per-Root Port
     resets in a Root Port stanza and deprecate describing them in the
     host bridge; this makes it possible to support multiple Root Ports
     in the future (Krishna Chaitanya Chundru)

   - Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)

   - Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)

   - Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
     bindings (Konrad Dybcio)

   - Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
     Zhang)

   - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
     (Niklas Cassel)

  Rockchip PCIe controller driver:

   - Drop unused PCIe Message routing and code definitions (Hans Zhang)

   - Remove several unused header includes (Hans Zhang)

   - Use standard PCIe config register definitions instead of
     rockchip-specific redefinitions (Geraldo Nascimento)

   - Set Target Link Speed to 5.0 GT/s before retraining so we have a
     chance to train at a higher speed (Geraldo Nascimento)

  Rockchip DesignWare PCIe controller driver:

   - Prevent race between link training and register update via DBI by
     inhibiting link training after hot reset and link down (Wilfred
     Mallawa)

   - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
     (Niklas Cassel)

  Sophgo PCIe controller driver:

   - Add DT binding and driver for Sophgo SG2044 PCIe controller driver
     in Root Complex mode (Inochi Amaoto)

  Synopsys DesignWare PCIe controller driver:

   - Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
     Ports that support > 5.0 GT/s. Slower Ports still rely on the
     not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
     waiting for the Link (Niklas Cassel)"

* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
  dt-bindings: PCI: Remove 83xx-512x-pci.txt
  dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
  dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
  dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
  dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
  dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
  PCI: Move is_pciehp check out of pciehp_is_native()
  PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
  PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
  PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
  selftests: pci_endpoint: Add doorbell test case
  misc: pci_endpoint_test: Add doorbell test case
  PCI: endpoint: pci-epf-test: Add doorbell test support
  PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
  PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
  PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
  PCI: vmd: Switch to msi_create_parent_irq_domain()
  PCI: vmd: Convert to lock guards
  ...

- Remove resolved hotplug TODO item (Guilherme Giacomo Simoes)

- Fix typos (Bjorn Helgaas)

* pci/misc:
  PCI: Fix typos
  PCI: hotplug: Remove TODO about unused .get_power(), .hardware_test()

- Teach handle_simple_irq() to resend an in-progress interrupt (Marc
  Zyngier)

- Defer probing if the MSI widget driver hasn't probed yet (Marc Zyngier)

- Drop useless conditional compilation, since pci-xgene.c is only compiled
  when CONFIG_PCI_XGENE is selected (Marc Zyngier)

- Drop useless XGENE_PCIE_IP_VER_UNKN IP version (Marc Zyngier)

- Simplify and make per-CPU interrupt setup robust (Marc Zyngier)

- Drop superfluous struct xgene_msi fields (Marc Zyngier)

- Use device-managed memory allocations (Marc Zyngier)

- Drop intermediate xgene_msi_group tracking structure (Marc Zyngier)

- Rewrite pci-xgene-msi.c to fix MSI CPU affinity and clean things up (Marc
  Zyngier)

- Resend an MSI racing with itself on a different CPU (Marc Zyngier)

- Probe xgene-msi as a standard platform driver rather than a
  subsys_initcall (Marc Zyngier)

- Simplify MSI handler setup/teardown by dropping useless CPU hotplug bits
  (Marc Zyngier)

- Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD (Marc Zyngier)

* pci/controller/xgene:
  cpu/hotplug: Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD
  PCI: xgene-msi: Restructure handler setup/teardown
  PCI: xgene-msi: Probe as a standard platform driver
  PCI: xgene-msi: Resend an MSI racing with itself on a different CPU
  PCI: xgene-msi: Sanitise MSI allocation and affinity setting
  PCI: xgene-msi: Get rid of intermediate tracking structure
  PCI: xgene-msi: Use device-managed memory allocations
  PCI: xgene-msi: Drop superfluous fields from xgene_msi structure
  PCI: xgene-msi: Make per-CPU interrupt setup robust
  PCI: xgene: Drop XGENE_PCIE_IP_VER_UNKN
  PCI: xgene: Drop useless conditional compilation
  PCI: xgene: Defer probing if the MSI widget driver hasn't probed yet
  genirq: Teach handle_simple_irq() to resend an in-progress interrupt