Pull s390 fixes from Heiko Carstens:

 - Fix potential use-after-free bug and missing error handling in PCI
   code

 - Fix dcssblk build error

 - Fix last breaking event handling in case of stack corruption to allow
   for better error reporting

 - Update defconfigs

* tag 's390-6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs
  s390/pci: Fix missing check for zpci_create_device() error return
  s390: Update defconfigs
  s390/dcssblk: Fix build error with CONFIG_DAX=m and CONFIG_DCSSBLK=y
  s390/entry: Fix last breaking event handling in case of stack corruption
  s390/configs: Enable options required for TC flow offload
  s390/configs: Enable VDPA on Nvidia ConnectX-6 network card

With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state
of zpci_dev's") the code to ignore power off of a PF that has child VFs
was changed from a direct return to a goto to the unlock and
pci_dev_put() section. The change however left the existing pci_dev_put()
untouched resulting in a doubple put. This can subsequently cause a use
after free if the struct pci_dev is released in an unexpected state.
Fix this by removing the extra pci_dev_put().

Cc: stable@vger.kernel.org
Fixes: bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull PCI fixes from Bjorn Helgaas:

 - When releasing a start-aligned resource, e.g., a bridge window, save
   start/end/flags for the next assignment attempt; fixes a v6.15-rc1
   regression (Ilpo Järvinen)

 - Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
   selftest v6.15-rc1 regression (Ilpo Järvinen)

 - Add Manivannan Sadhasivam as maintainer of native host bridge and
   endpoint drivers (Manivannan Sadhasivam)

 - In endpoint test driver, defer IRQ allocation from .probe() until
   ioctl() to fix a regression on platforms where the Vendor/Device ID
   match doesn't include driver_data (Niklas Cassel)

* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
  MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
  selftests/pcie_bwctrl: Fix test progs list
  PCI: Restore assigned resources fully after release

Pull misc irq fixes from Ingo Molnar:

 - Fix BCM2712 irqchip driver Kconfig dependencies required on the
   Raspberry PI5

 - Fix spurious interrupts on RZ/G3E SMARC EVK systems

 - Fix crash regression on Sun/NIU hardware

 - Apply MSI driver quirk for Sun Neptune chips

* tag 'irq-urgent-2025-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-bcm2712-mip: Enable driver when ARCH_BCM2835 is enabled
  irqchip/renesas-rzv2h: Prevent TINT spurious interrupt
  net/niu: Niu requires MSIX ENTRY_DATA fields touch before entry reads
  PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads

PCI resource fitting code in __assign_resources_sorted() runs in multiple
steps. A resource that was successfully assigned may have to be released
before the next step attempts assignment again. The assign+release cycle is
destructive to a start-aligned struct resource (bridge window or IOV
resource) because the start field is overwritten with the real address when
the resource got assigned.

One symptom:

  pci 0002:00:00.0: bridge window [mem size 0x00100000]: can't assign; bogus alignment

Properly restore the resource after releasing it. The start, end, and flags
fields must be stored into the related struct pci_dev_resource in order to
be able to restore the resource to its original state.

Fixes: 96336ec70264 ("PCI: Perform reset_resource() and build fail list in sync")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/01eb7d40-f5b5-4ec5-b390-a5c042c30aff@roeck-us.net/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Closes: https://lore.kernel.org/r/3578030.5fSG56mABF@workhorse
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://patch.msgid.link/20250403093137.1481-1-ilpo.jarvinen@linux.intel.com

Pull pci fix from Bjorn Helgaas:

 - Revert a reset patch that broke VFIO passthrough because devices
   ended up with no available reset mechanisms (Alex Williamson)

* tag 'pci-v6.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: Avoid reset when disabled via sysfs"

This reverts commit 479380efe1625e251008d24b2810283db60d6fcd.

The reset_method attribute on a PCI device is only intended to manage the
availability of function scoped resets for a device.  It was never intended
to restrict resets targeting the bus or slot.

In introducing a restriction that each device must support function level
reset by testing pci_reset_supported(), we essentially create a catch-22,
that a device must have a function scope reset in order to support bus/slot
reset, when we use bus/slot reset to effect a reset of a device that does
not support a function scoped reset, especially multi-function devices.

This breaks the majority of uses cases where vfio-pci uses bus/slot resets
to manage multifunction devices that do not support function scoped resets.

Fixes: 479380efe162 ("PCI: Avoid reset when disabled via sysfs")
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/808e1111-27b7-f35b-6d5c-5b275e73677b@absolutedigital.net
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220010
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250414211828.3530741-1-alex.williamson@redhat.com

Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.

This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.

Add an optional early writel() in msix_prepare_msi_desc().

Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com

quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:

  reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
  WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
  RIP: 0010:__iommu_probe_device+0x140/0x570

The SR-IOV enumeration ordering changes like this:

  pci_iov_add_virtfn
    pci_device_add
      pci_fixup_device(pci_fixup_header)      <--
      device_add
        bus_notify
          iommu_bus_notifier
  +         iommu_probe_device
  +           arm_smmu_probe_device
    pci_bus_add_device
      pci_fixup_device(pci_fixup_final)       <--
      device_attach
        driver_probe_device
          really_probe
            pci_dma_configure
              acpi_dma_configure_id
  -             iommu_probe_device
  -               arm_smmu_probe_device

The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.

Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().

Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>