linux-stable.git/drivers/pci, branch v5.4.280 Linux kernel stable tree PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports 2024-07-05T07:08:21+00:00 Mario Limonciello mario.limonciello@amd.com 2024-03-07T16:37:09+00:00 993401b52f40ecbc3b3f453b0f23a95069e2a663 [ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ] Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails with the following sequence: ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529) radeon 0000:01:00.0: not ready 1023ms after resume; waiting radeon 0000:01:00.0: not ready 2047ms after resume; waiting radeon 0000:01:00.0: not ready 4095ms after resume; waiting radeon 0000:01:00.0: not ready 8191ms after resume; waiting radeon 0000:01:00.0: not ready 16383ms after resume; waiting radeon 0000:01:00.0: not ready 32767ms after resume; waiting radeon 0000:01:00.0: not ready 65535ms after resume; giving up radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible The issue is that the Root Port the dGPU is connected to can't handle the transition from D3cold to D0 so the dGPU can't properly exit runtime PM. The existing logic in pci_bridge_d3_possible() checks for systems that are newer than 2015 to decide that D3 is safe. This would nominally work for an Ivy Bridge system (which was discontinued in 2015), but this system appears to have continued to receive BIOS updates until 2017 and so this existing logic doesn't appropriately capture it. Add the system to bridge_d3_blacklist to prevent D3cold from being used. Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com Reported-by: Eric Heintzmann <heintzmann.eric@free.fr> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Eric Heintzmann <heintzmann.eric@free.fr> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ]

Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU.  Attempting to use the dGPU fails
with the following sequence:

  ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
  radeon 0000:01:00.0: not ready 1023ms after resume; waiting
  radeon 0000:01:00.0: not ready 2047ms after resume; waiting
  radeon 0000:01:00.0: not ready 4095ms after resume; waiting
  radeon 0000:01:00.0: not ready 8191ms after resume; waiting
  radeon 0000:01:00.0: not ready 16383ms after resume; waiting
  radeon 0000:01:00.0: not ready 32767ms after resume; waiting
  radeon 0000:01:00.0: not ready 65535ms after resume; giving up
  radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible

The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.

The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe.  This would nominally work for
an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.

Add the system to bridge_d3_blacklist to prevent D3cold from being used.

Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com
Reported-by: Eric Heintzmann <heintzmann.eric@free.fr>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Heintzmann <heintzmann.eric@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id 2024-07-05T07:08:18+00:00 Rick Wertenbroek rick.wertenbroek@gmail.com 2024-04-03T14:45:08+00:00 5edb09d66c425a9fb0b7c47864dcf788e910d960 commit 2dba285caba53f309d6060fca911b43d63f41697 upstream. Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem Vendor ID are u16 variables and are written to a u32 register of the controller. The Subsystem Vendor ID was always 0 because the u16 value was masked incorrectly with GENMASK(31,16) resulting in all lower 16 bits being set to 0 prior to the shift. Remove both masks as they are unnecessary and set the register correctly i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the Subsystem Vendor ID. This is documented in the RK3399 TRM section 17.6.7.1.17 [kwilczynski: removed unnecesary newline] Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Link: https://lore.kernel.org/linux-pci/20240403144508.489835-1-rick.wertenbroek@gmail.com Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2dba285caba53f309d6060fca911b43d63f41697 upstream.

Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem
Vendor ID are u16 variables and are written to a u32 register of the
controller. The Subsystem Vendor ID was always 0 because the u16 value
was masked incorrectly with GENMASK(31,16) resulting in all lower 16
bits being set to 0 prior to the shift.

Remove both masks as they are unnecessary and set the register correctly
i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the
Subsystem Vendor ID.

This is documented in the RK3399 TRM section 17.6.7.1.17

[kwilczynski: removed unnecesary newline]
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Link: https://lore.kernel.org/linux-pci/20240403144508.489835-1-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI/PM: Drain runtime-idle callbacks before driver removal 2024-04-13T10:51:25+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2024-03-05T10:45:38+00:00 47d8aafcfe313511a98f165a54d0adceb34e54b1 [ Upstream commit 9d5286d4e7f68beab450deddbb6a32edd5ecf4bf ] A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks. Link: https://lore.kernel.org/lkml/20240229062201.49500-1-kai.heng.feng@canonical.com/ # [1] Link: https://lore.kernel.org/r/5761426.DvuYhMxLoT@kreacher Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Ricky Wu <ricky_wu@realtek.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9d5286d4e7f68beab450deddbb6a32edd5ecf4bf ]

A race condition between the .runtime_idle() callback and the .remove()
callback in the rtsx_pcr PCI driver leads to a kernel crash due to an
unhandled page fault [1].

The problem is that rtsx_pci_runtime_idle() is not expected to be running
after pm_runtime_get_sync() has been called, but the latter doesn't really
guarantee that.  It only guarantees that the suspend and resume callbacks
will not be running when it returns.

However, if a .runtime_idle() callback is already running when
pm_runtime_get_sync() is called, the latter will notice that the runtime PM
status of the device is RPM_ACTIVE and it will return right away without
waiting for the former to complete.  In fact, it cannot wait for
.runtime_idle() to complete because it may be called from that callback (it
arguably does not make much sense to do that, but it is not strictly
prohibited).

Thus in general, whoever is providing a .runtime_idle() callback needs
to protect it from running in parallel with whatever code runs after
pm_runtime_get_sync().  [Note that .runtime_idle() will not start after
pm_runtime_get_sync() has returned, but it may continue running then if it
has started earlier.]

One way to address that race condition is to call pm_runtime_barrier()
after pm_runtime_get_sync() (not before it, because a nonzero value of the
runtime PM usage counter is necessary to prevent runtime PM callbacks from
being invoked) to wait for the .runtime_idle() callback to complete should
it be running at that point.  A suitable place for doing that is in
pci_device_remove() which calls pm_runtime_get_sync() before removing the
driver, so it may as well call pm_runtime_barrier() subsequently, which
will prevent the race in question from occurring, not just in the rtsx_pcr
driver, but in any PCI drivers providing .runtime_idle() callbacks.

Link: https://lore.kernel.org/lkml/20240229062201.49500-1-kai.heng.feng@canonical.com/ # [1]
Link: https://lore.kernel.org/r/5761426.DvuYhMxLoT@kreacher
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ricky Wu <ricky_wu@realtek.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: Drop pci_device_remove() test of pci_dev->driver 2024-04-13T10:51:25+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2021-10-04T12:59:25+00:00 ec6f7c080700459a4d2a17766be2c77866d8cc34 [ Upstream commit 097d9d414433315122f759ee6c2d8a7417a8ff0f ] When the driver core calls pci_device_remove(), there is a driver bound to the device, so pci_dev->driver is never NULL. Remove the unnecessary test of pci_dev->driver. Link: https://lore.kernel.org/r/20211004125935.2300113-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Stable-dep-of: 9d5286d4e7f6 ("PCI/PM: Drain runtime-idle callbacks before driver removal") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 097d9d414433315122f759ee6c2d8a7417a8ff0f ]

When the driver core calls pci_device_remove(), there is a driver bound
to the device, so pci_dev->driver is never NULL.

Remove the unnecessary test of pci_dev->driver.

Link: https://lore.kernel.org/r/20211004125935.2300113-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 9d5286d4e7f6 ("PCI/PM: Drain runtime-idle callbacks before driver removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: Mark 3ware-9650SE Root Port Extended Tags as broken 2024-03-26T22:22:21+00:00 Jörg Wedekind joerg@wedekind.de 2024-02-19T13:28:11+00:00 44163c73b0ddffee8c647f3d6d1f8d472693457d [ Upstream commit baf67aefbe7d7deafa59ca49612d163f8889934c ] Per PCIe r6.1, sec 2.2.6.2 and 7.5.3.4, a Requester may not use 8-bit Tags unless its Extended Tag Field Enable is set, but all Receivers/Completers must handle 8-bit Tags correctly regardless of their Extended Tag Field Enable. Some devices do not handle 8-bit Tags as Completers, so add a quirk for them. If we find such a device, we disable Extended Tags for the entire hierarchy to make peer-to-peer DMA possible. The 3ware 9650SE seems to have issues with handling 8-bit tags. Mark it as broken. This fixes PCI Parity Errors like : 3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing. Link: https://lore.kernel.org/r/20240219132811.8351-1-joerg@wedekind.de Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425 Signed-off-by: Jörg Wedekind <joerg@wedekind.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit baf67aefbe7d7deafa59ca49612d163f8889934c ]

Per PCIe r6.1, sec 2.2.6.2 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.

Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them.  If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.

The 3ware 9650SE seems to have issues with handling 8-bit tags. Mark it as
broken.

This fixes PCI Parity Errors like :

  3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing.

Link: https://lore.kernel.org/r/20240219132811.8351-1-joerg@wedekind.de
Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425
Signed-off-by: Jörg Wedekind <joerg@wedekind.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: switchtec: Fix an error handling path in switchtec_pci_probe() 2024-03-26T22:22:20+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2023-12-24T14:30:01+00:00 79ab81939318d69dbf0524f00e1e45d97ecd0ed1 [ Upstream commit dec529b0b0572b32f9eb91c882dd1f08ca657efb ] The commit in Fixes changed the logic on how resources are released and introduced a new switchtec_exit_pci() that need to be called explicitly in order to undo a corresponding switchtec_init_pci(). This was done in the remove function, but not in the probe. Fix the probe now. Fixes: df25461119d9 ("PCI: switchtec: Fix stdev_release() crash after surprise hot remove") Link: https://lore.kernel.org/r/01446d2ccb91a578239915812f2b7dfbeb2882af.1703428183.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dec529b0b0572b32f9eb91c882dd1f08ca657efb ]

The commit in Fixes changed the logic on how resources are released and
introduced a new switchtec_exit_pci() that need to be called explicitly in
order to undo a corresponding switchtec_init_pci().

This was done in the remove function, but not in the probe.

Fix the probe now.

Fixes: df25461119d9 ("PCI: switchtec: Fix stdev_release() crash after surprise hot remove")
Link: https://lore.kernel.org/r/01446d2ccb91a578239915812f2b7dfbeb2882af.1703428183.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI/DPC: Print all TLP Prefixes, not just the first 2024-03-26T22:22:19+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2024-01-18T11:08:15+00:00 adc8a9167660abde1fa030acbaaefb4ff5790381 [ Upstream commit 6568d82512b0a64809acff3d7a747362fa4288c8 ] The TLP Prefix Log Register consists of multiple DWORDs (PCIe r6.1 sec 7.9.14.13) but the loop in dpc_process_rp_pio_error() keeps reading from the first DWORD, so we print only the first PIO TLP Prefix (duplicated several times), and we never print the second, third, etc., Prefixes. Add the iteration count based offset calculation into the config read. Fixes: f20c4ea49ec4 ("PCI/DPC: Add eDPC support") Link: https://lore.kernel.org/r/20240118110815.3867-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: add user-visible details to commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6568d82512b0a64809acff3d7a747362fa4288c8 ]

The TLP Prefix Log Register consists of multiple DWORDs (PCIe r6.1 sec
7.9.14.13) but the loop in dpc_process_rp_pio_error() keeps reading from
the first DWORD, so we print only the first PIO TLP Prefix (duplicated
several times), and we never print the second, third, etc., Prefixes.

Add the iteration count based offset calculation into the config read.

Fixes: f20c4ea49ec4 ("PCI/DPC: Add eDPC support")
Link: https://lore.kernel.org/r/20240118110815.3867-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: add user-visible details to commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI/MSI: Prevent MSI hardware interrupt number truncation 2024-03-01T12:13:36+00:00 Vidya Sagar vidyas@nvidia.com 2024-01-15T13:56:49+00:00 caf4a67c01313a1a2e420dfa16d8bb24880124ce commit db744ddd59be798c2627efbfc71f707f5a935a40 upstream. While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0. To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number. Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels. Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit db744ddd59be798c2627efbfc71f707f5a935a40 upstream.

While calculating the hardware interrupt number for a MSI interrupt, the
higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI
domain number gets truncated because of the shifted value casting to return
type of pci_domain_nr() which is 'int'. This for example is resulting in
same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0.

To address this cast the PCI domain number to 'irq_hw_number_t' before left
shifting it to calculate the hardware interrupt number.

Please note that this fixes the issue only on 64-bit systems and doesn't
change the behavior for 32-bit systems i.e. the 32-bit systems continue to
have the issue. Since the issue surfaces only if there are too many PCIe
controllers in the system which usually is the case in modern server
systems and they don't tend to run 32-bit kernels.

Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: tegra: Fix OF node reference leak 2024-03-01T12:13:36+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-05-04T17:17:42+00:00 6ede985c6b563c193406b73142d32691e5a5884c [ Upstream commit eff21f5da308265678e7e59821795e606f3e560f ] Commit 9e38e690ace3 ("PCI: tegra: Fix OF node reference leak") has fixed some node reference leaks in this function but missed some of them. In fact, having 'port' referenced in the 'rp' structure is not enough to prevent the leak, until 'rp' is actually added in the 'pcie->ports' list. Add the missing 'goto err_node_put' accordingly. Link: https://lore.kernel.org/r/55b11e9a7fa2987fbc0869d68ae59888954d65e2.1620148539.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eff21f5da308265678e7e59821795e606f3e560f ]

Commit 9e38e690ace3 ("PCI: tegra: Fix OF node reference leak") has fixed
some node reference leaks in this function but missed some of them.

In fact, having 'port' referenced in the 'rp' structure is not enough to
prevent the leak, until 'rp' is actually added in the 'pcie->ports' list.

Add the missing 'goto err_node_put' accordingly.

Link: https://lore.kernel.org/r/55b11e9a7fa2987fbc0869d68ae59888954d65e2.1620148539.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: tegra: Fix reporting GPIO error value 2024-03-01T12:13:35+00:00 Pali Rohár pali@kernel.org 2020-04-14T10:25:12+00:00 e04a2afd081fbf9e782dd74fbc87d2c4cb0fee55 [ Upstream commit 63605f1cfcc56bcb25c48bbee75a679d85ba7675 ] Error code is stored in rp->reset_gpio and not in err variable. Link: https://lore.kernel.org/r/20200414102512.27506-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Stable-dep-of: eff21f5da308 ("PCI: tegra: Fix OF node reference leak") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 63605f1cfcc56bcb25c48bbee75a679d85ba7675 ]

Error code is stored in rp->reset_gpio and not in err variable.

Link: https://lore.kernel.org/r/20200414102512.27506-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Stable-dep-of: eff21f5da308 ("PCI: tegra: Fix OF node reference leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>