With commit 669cbc708122 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated
into resources when the host bridge is allocated. The resources are
requested as well, but that happens a second time for the mvebu driver in
mvebu_pcie_parse_request_resources(). We should only be requesting the
additional resources added in mvebu_pcie_parse_request_resources().  These
are not added by default because they use custom properties rather than
standard DT address translation.

Also, the bus ranges was also populated by default, so we can remove it
from mvebu_pci_host_probe().

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729
Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org
Reported-by: vtolkm@googlemail.com
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>

Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"),
the DWC driver was setting up the last memory resource rather than the
first memory resource. This doesn't matter for most platforms which only
have 1 memory resource, but it broke Tegra194 which has a 2nd
(prefetchable) memory region that requires an ATU entry. The first region
on Tegra194 relies on the default 1:1 pass-thru of outbound transactions
and doesn't need an ATU entry.

Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.org
Reported-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

Some devices support ACS functionality even though they don't have a
spec-compliant ACS Capability; pci_enable_acs() has a quirk mechanism to
handle them.

We want to enable ACS whenever possible, but 52fbf5bdeeef ("PCI: Cache ACS
capability offset in device") inadvertently broke this by calling
pci_enable_acs() only if we find an ACS Capability.

This resulted in ACS not being enabled for these non-compliant devices,
which means devices can't be separated into different IOMMU groups, which
in turn means we may not be able to pass those devices through to VMs, as
reported by Boris V:

  https://lore.kernel.org/r/74aeea93-8a46-5f5a-343c-790d4c655da3@bstnet.org

Fixes: 52fbf5bdeeef ("PCI: Cache ACS capability offset in device")
Link: https://lore.kernel.org/r/20201028231545.4116866-1-rajatja@google.com
Reported-by: Boris V <borisvk@bstnet.org>
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>

Pull VFIO updates from Alex Williamson:

 - New fsl-mc vfio bus driver supporting userspace drivers of objects
   within NXP's DPAA2 architecture (Diana Craciun)

 - Support for exposing zPCI information on s390 (Matthew Rosato)

 - Fixes for "detached" VFs on s390 (Matthew Rosato)

 - Fixes for pin-pages and dma-rw accesses (Yan Zhao)

 - Cleanups and optimize vconfig regen (Zenghui Yu)

 - Fix duplicate irq-bypass token registration (Alex Williamson)

* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
  vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
  vfio/pci: Clear token on bypass registration failure
  vfio/fsl-mc: fix the return of the uninitialized variable ret
  vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
  vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
  MAINTAINERS: Add entry for s390 vfio-pci
  vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
  vfio/fsl-mc: Add support for device reset
  vfio/fsl-mc: Add read/write support for fsl-mc devices
  vfio/fsl-mc: trigger an interrupt via eventfd
  vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
  vfio/fsl-mc: Added lock support in preparation for interrupt handling
  vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
  vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
  vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
  vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
  vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
  s390/pci: track whether util_str is valid in the zpci_dev
  s390/pci: stash version in the zpci_dev
  vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
     Liu)
   - Add schedule point in pci_read_config() to reduce max latency
     (Jiang Biao)
   - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)

  Resource management:
   - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
     Pieralisi)

  PCIe native device hotplug:
   - Reduce noisiness on hot removal (Lukas Wunner)

  Power management:
   - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
     that was done on the basis of spec typo (Bjorn Helgaas)
   - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
     ambiguity (Krzysztof Wilczyński)
   - Remove unused pcibios_pm_ops (Vaibhav Gupta)

  IOMMU:
   - Enable Translation Blocking for external devices to harden against
     DMA attacks (Rajat Jain)

  Error handling:
   - Add an ACPI APEI notifier chain for vendor CPER records to enable
     device-specific error handling (Shiju Jose)

  ASPM:
   - Remove struct aspm_register_info to simplify code (Saheed O.
     Bolarinwa)

  Amlogic Meson PCIe controller driver:
   - Build as module by default (Kevin Hilman)

  Ampere Altra PCIe controller driver:
   - Add MCFG quirk to work around non-standard ECAM implementation
     (Tuan Phan)

  Broadcom iProc PCIe controller driver:
   - Set affinity mask on MSI interrupts (Mark Tomlinson)

  Broadcom STB PCIe controller driver:
   - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
   - Add DT bindings for more Brcmstb chips (Jim Quinlan)
   - Add bcm7278 register info (Jim Quinlan)
   - Add bcm7278 PERST# support (Jim Quinlan)
   - Add suspend and resume pm_ops (Jim Quinlan)
   - Add control of rescal reset (Jim Quinlan)
   - Set additional internal memory DMA viewport sizes (Jim Quinlan)
   - Accommodate MSI for older chips (Jim Quinlan)
   - Set bus max burst size by chip type (Jim Quinlan)
   - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Use dev_err_probe() to reduce redundant messages (Anson Huang)

  Freescale Layerscape PCIe controller driver:
   - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
   - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint test support for lS1088a (Xiaowei Bao)
   - Add MSI-X support for ls1088a (Xiaowei Bao)

  HiSilicon HIP PCIe controller driver:
   - Handle HIP-specific errors via ACPI APEI (Yicong Yang)

  HiSilicon Kirin PCIe controller driver:
   - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)

  Intel VMD host bridge driver:
   - Factor out physical offset, bus offset, IRQ domain, IRQ allocation
     (Jon Derrick)
   - Use generic PCI PM correctly (Jon Derrick)

  Marvell Aardvark PCIe controller driver:
   - Fix compilation on s390 (Pali Rohár)
   - Implement driver 'remove' function and allow to build it as module
     (Pali Rohár)
   - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
   - Convert mvebu a3700 internal SMCC firmware return codes to errno
     (Pali Rohár)
   - Fix initialization with old Marvell's Arm Trusted Firmware (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:
   - Fix hibernation in case interrupts are not re-created (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:
   - Stop checking return value of debugfs_create() functions (Greg
     Kroah-Hartman)
   - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)

  Qualcomm PCIe controller driver:
   - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)

  Renesas R-Car PCIe controller driver:
   - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
     (Lad Prabhakar)
   - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
   - Add DT support for r8a7742 (Lad Prabhakar)

  Socionext UniPhier Pro5 controller driver:
   - Add DT descriptions of iATU register (host and endpoint) (Kunihiko
     Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
     unavoidable) (Hou Zhiqiang)
   - Fix endpoint Header Type check so multi-function devices work (Hou
     Zhiqiang)
   - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
   - Stop leaking MSI page in suspend/resume (Jisheng Zhang)
   - Add common iATU register support instead of keystone-specific code
     (Kunihiko Hayashi)
   - Major config space access and other cleanups in dwc core and
     drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
     kirin, meson, qcom, tegra) (Rob Herring)
   - Add multiple PFs support for endpoint (Xiaowei Bao)
   - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)

  Miscellaneous:
   - Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
   - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
   - Fix "cast truncates bits from constant value" warnings (Gustavo
     Pimentel)
   - Remove redundant zeroing for sg_init_table() (Julia Lawall)
   - Use scnprintf(), not snprintf(), in sysfs "show" functions
     (Krzysztof Wilczyński)
   - Remove unused assignments (Krzysztof Wilczyński)
   - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
   - Simplify bool comparisons (Krzysztof Wilczyński)
   - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
     Miao)
   - Simplify return expressions (Qinglang Miao)"

* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
  PCI: vmd: Update VMD PM to correctly use generic PCI PM
  PCI: vmd: Create IRQ allocation helper
  PCI: vmd: Create IRQ Domain configuration helper
  PCI: vmd: Create bus offset configuration helper
  PCI: vmd: Create physical offset helper
  PCI: v3-semi: Remove unneeded break
  PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
  PCI/ASPM: Remove struct pcie_link_state.l1ss
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
  PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
  PCI/ASPM: Remove struct aspm_register_info.latency_encoding
  PCI/ASPM: Remove struct aspm_register_info.enabled
  PCI/ASPM: Remove struct aspm_register_info.support
  PCI/ASPM: Use 'parent' and 'child' for readability
  PCI/ASPM: Move LTR path check to where it's used
  PCI/ASPM: Move pci_clear_and_set_dword() earlier
  PCI: dwc: Fix MSI page leakage in suspend/resume
  ...

- Remove leftover bridge initialization (Lorenzo Pieralisi)

* remotes/lorenzo/pci/xilinx:
  PCI: xilinx-cpm: Remove leftover bridge initialization

- Remove unused assignment (Krzysztof Wilczyński)

* remotes/lorenzo/pci/xgene:
  PCI: xgene: Remove unused assignment to variable msi_val

- Add physical offset helper (Jon Derrick)

- Add bus offset configuration helper (Jon Derrick)

- Add IRQ domain configuration helper (Jon Derrick)

- Add IRQ allocation helper (Jon Derrick)

- Drop pci_save_state()/pci_restore_state() in favor of the PCI core PM
  (Jon Derrick)

* pci/vmd:
  PCI: vmd: Update VMD PM to correctly use generic PCI PM
  PCI: vmd: Create IRQ allocation helper
  PCI: vmd: Create IRQ Domain configuration helper
  PCI: vmd: Create bus offset configuration helper
  PCI: vmd: Create physical offset helper

- Drop return value checking for debugfs_create() calls (Greg
  Kroah-Hartman)

- Convert debugfs "ports" file to use DEFINE_SEQ_ATTRIBUTE() (Liu Shixin)

* remotes/lorenzo/pci/tegra:
  PCI: tegra: Convert to use DEFINE_SEQ_ATTRIBUTE macro
  PCI: tegra: No need to check return value of debugfs_create() functions

- Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad
  Prabhakar)

- Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint
  test (Lad Prabhakar)

- Add device tree support for R8A7742 (Lad Prabhakar)

- Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva)

* remotes/lorenzo/pci/rcar:
  dt-bindings: PCI: rcar: Add device tree support for r8a7742
  PCI: rcar-gen2: Use fallthrough pseudo-keyword
  misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller
  dt-bindings: pci: rcar-pci-ep: Document r8a774e1
  misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers
  dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1