[ Upstream commit 699ca30162686bf305cdf94861be02eb0cf9bda2 ]

If __get_free_pages() fails, return -ENOMEM to avoid a NULL pointer
dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 954b4b752a4c4e963b017ed8cef4c453c5ed308d ]

The MSI message address in the RC address space can be 64 bit. The
R-Car PCIe RC supports such a 64bit MSI message address as well.
The code currently uses virt_to_phys(__get_free_pages()) to obtain
a reserved page for the MSI message address, and the return value
of which can be a 64 bit physical address on 64 bit system.

However, the driver only programs PCIEMSIALR register with the bottom
32 bits of the virt_to_phys(__get_free_pages()) return value and does
not program the top 32 bits into PCIEMSIAUR, but rather programs the
PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car
SoCs, however may fail on new 64 bit R-Car SoCs.

Since from a PCIe controller perspective, an inbound MSI is a memory
write to a special address (in case of this controller, defined by
the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but
never hits the DRAM _and_ because allocation of an MSI by a PCIe card
driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR
in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot
cause memory corruption or other issues.

There is however the possibility that if virt_to_phys(__get_free_pages())
returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed
to 0x0 _and_ if the system had physical RAM at the address matching the
value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a
physical address matching the value of PCIEMSIALR and a remote write to
such a buffer by a PCIe card would trigger a spurious MSI.

Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f0d14edd2ba43b995bef4dd5da5ffe0ae19321a1 ]

In case __get_free_pages() fails and returns NULL, fix the return
value to -ENOMEM and release resources to avoid dereferencing a
NULL pointer.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fb26228bfc4ce3951544848555c0278e2832e618 ]

The find_dlpar_node() helper returns a device node with its reference
incremented.  Both the add and remove paths use this helper for find the
appropriate node, but fail to release the reference when done.

Annotate the find_dlpar_node() helper with a comment about the incremented
reference count and call of_node_put() on the obtained device_node in the
add and remove paths.  Also, fixup a reference leak in the find_vio_slot()
helper where we fail to call of_node_put() on the vdevice node after we
iterate over its children.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream.

Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.

If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed.  That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.

See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details.  Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.

Add a new flag, clear_retrain_link, in struct pci_dev.  Quirks for affected
devices set this bit.

Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.

Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86fa6a344209d9414ea962b1f1ac6ade9dd7563a upstream.

Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk.  No
functional change intended.

Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6afb7e26978da5e86e57e540fdce65c8b04f398a upstream.

When using PCI passthrough with this device, the host machine locks up
completely when starting the VM, requiring a hard reboot.  Add a quirk to
avoid bus resets on this device.

Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.com
Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 ]

When a device is created in new_pcichild_device(), hpdev->refs is set
to 2 (i.e. the initial value of 1 plus the get_pcichild()).

When we hot remove the device from the host, in a Linux VM we first call
hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and
then schedules a work of hv_eject_device_work(), so hpdev->refs becomes
3 (let's ignore the paired get/put_pcichild() in other places). But in
hv_eject_device_work(), currently we only call put_pcichild() twice,
meaning the 'hpdev' struct can't be freed in put_pcichild().

Add one put_pcichild() to fix the memory leak.

The device can also be removed when we run "rmmod pci-hyperv". On this
path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()),
hpdev->refs is 2, and we do correctly call put_pcichild() twice in
pci_devices_present_work().

Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: commit log rework]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f2c4db1bd80720cd8cb2a5aa220d9bc9f374f04e upstream.

Going primarily by:

  https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors

with additional information gleaned from other related pages; notably:

 - Bonnell shrink was called Saltwell
 - Moorefield is the Merriefield refresh which makes it Airmont

The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE

  for i in `git grep -l FAM6_ATOM` ; do
	sed -i  -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g'		\
		-e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/'		\
		-e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g'		\
		-e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g'	\
		-e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g'		\
		-e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g'	\
		-e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g'	\
		-e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g'	\
		-e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g'	\
		-e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g'		\
		-e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i}
  done

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dave.hansen@linux.intel.com
Cc: len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 4.9:
 - Drop changes to CPU IDs that weren't already included
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9cde402a59770a0669d895399c13407f63d7d209 upstream.

There is a Marvell 88SE9170 PCIe SATA controller I found on a board here.
Some quick testing with the ARM SMMU enabled reveals that it suffers from
the same requester ID mixup problems as the other Marvell chips listed
already.

Add the PCI vendor/device ID to the list of chips which need the
workaround.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>