linux-stable.git/drivers/pci, branch v4.4.166 Linux kernel stable tree PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk 2018-11-21T08:27:34+00:00 Bin Meng bmeng.cn@gmail.com 2018-09-26T15:14:01+00:00 d681d83d8399e468f22a72ef9c0c54b1f25f6d64 commit d0c9606b31a21028fb5b753c8ad79626292accfd upstream. Add Device IDs to the Intel GPU "spurious interrupt" quirk table. For these devices, unplugging the VGA cable and plugging it in again causes spurious interrupts from the IGD. Linux eventually disables the interrupt, but of course that disables any other devices sharing the interrupt. The theory is that this is a VGA BIOS defect: it should have disabled the IGD interrupt but failed to do so. See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") and 7c82126a94e6 ("PCI: Add new ID for Intel GPU "spurious interrupt" quirk") for some history. [bhelgaas: See link below for discussion about how to fix this more generically instead of adding device IDs for every new Intel GPU. I hope this is the last patch to add device IDs.] Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.com Signed-off-by: Bin Meng <bmeng.cn@gmail.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d0c9606b31a21028fb5b753c8ad79626292accfd upstream.

Add Device IDs to the Intel GPU "spurious interrupt" quirk table.

For these devices, unplugging the VGA cable and plugging it in again causes
spurious interrupts from the IGD.  Linux eventually disables the interrupt,
but of course that disables any other devices sharing the interrupt.

The theory is that this is a VGA BIOS defect: it should have disabled the
IGD interrupt but failed to do so.

See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") and 7c82126a94e6 ("PCI: Add new ID for Intel GPU
"spurious interrupt" quirk") for some history.

[bhelgaas: See link below for discussion about how to fix this more
generically instead of adding device IDs for every new Intel GPU.  I hope
this is the last patch to add device IDs.]

Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Reprogram bridge prefetch registers on resume 2018-10-13T07:11:32+00:00 Daniel Drake drake@endlessm.com 2018-09-27T20:47:33+00:00 5527ae62617e69400435aa2f8b95656ad41626a2 commit 083874549fdfefa629dfa752785e20427dde1511 upstream. On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3 suspend/resume. The affected products include multiple generations of NVIDIA GPUs and Intel SoCs. After resume, nouveau logs many errors such as: fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04 [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown] DRM: failed to idle channel 0 [DRM] Similarly, the NVIDIA proprietary driver also fails after resume (black screen, 100% CPU usage in Xorg process). We shipped a sample to NVIDIA for diagnosis, and their response indicated that it's a problem with the parent PCI bridge (on the Intel SoC), not the GPU. Runtime suspend/resume works fine, only S3 suspend is affected. We found a workaround: on resume, rewrite the Intel PCI bridge 'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32). In the cases that I checked, this register has value 0 and we just have to rewrite that value. Linux already saves and restores PCI config space during suspend/resume, but this register was being skipped because upon resume, it already has value 0 (the correct, pre-suspend value). Intel appear to have previously acknowledged this behaviour and the requirement to rewrite this register: https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23 Based on that, rewrite the prefetch register values even when that appears unnecessary. We have confirmed this solution on all the affected models we have in-hands (X542UQ, UX533FD, X530UN, V272UN). Additionally, this solves an issue where r8169 MSI-X interrupts were broken after S3 suspend/resume on ASUS X441UAR. This issue was recently worked around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e"). It also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop that we had not yet patched. I suspect it will also fix the issue that was worked around in commit 7c53a722459c ("r8169: don't use MSI-X on RTL8168g"). Thomas Martitz reports that this change also solves an issue where the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3 suspend/resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069 Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-By: Peter Wu <peter@lekensteyn.nl> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 083874549fdfefa629dfa752785e20427dde1511 upstream.

On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3
suspend/resume.  The affected products include multiple generations of
NVIDIA GPUs and Intel SoCs.  After resume, nouveau logs many errors such
as:

  fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04
        [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown]
  DRM: failed to idle channel 0 [DRM]

Similarly, the NVIDIA proprietary driver also fails after resume (black
screen, 100% CPU usage in Xorg process).  We shipped a sample to NVIDIA for
diagnosis, and their response indicated that it's a problem with the parent
PCI bridge (on the Intel SoC), not the GPU.

Runtime suspend/resume works fine, only S3 suspend is affected.

We found a workaround: on resume, rewrite the Intel PCI bridge
'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32).  In the
cases that I checked, this register has value 0 and we just have to rewrite
that value.

Linux already saves and restores PCI config space during suspend/resume,
but this register was being skipped because upon resume, it already has
value 0 (the correct, pre-suspend value).

Intel appear to have previously acknowledged this behaviour and the
requirement to rewrite this register:
https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23

Based on that, rewrite the prefetch register values even when that appears
unnecessary.

We have confirmed this solution on all the affected models we have in-hands
(X542UQ, UX533FD, X530UN, V272UN).

Additionally, this solves an issue where r8169 MSI-X interrupts were broken
after S3 suspend/resume on ASUS X441UAR.  This issue was recently worked
around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e").  It
also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop
that we had not yet patched.  I suspect it will also fix the issue that was
worked around in commit 7c53a722459c ("r8169: don't use MSI-X on
RTL8168g").

Thomas Martitz reports that this change also solves an issue where the AMD
Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3
suspend/resume.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-By: Peter Wu <peter@lekensteyn.nl>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: mvebu: Fix I/O space end address calculation 2018-09-15T07:40:39+00:00 Thomas Petazzoni thomas.petazzoni@bootlin.com 2018-08-03T14:38:44+00:00 d07bbe50d1b7e98fb1afeed62506c28dd1a21700 [ Upstream commit dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ] pcie->realio.end should be the address of last byte of the area, therefore using resource_size() of another resource is not correct, we must substract 1 to get the address of the last byte. Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ]

pcie->realio.end should be the address of last byte of the area,
therefore using resource_size() of another resource is not correct, we
must substract 1 to get the address of the last byte.

Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: pciehp: Fix use-after-free on unplug 2018-08-24T11:27:01+00:00 Lukas Wunner lukas@wunner.de 2018-07-19T22:27:32+00:00 131412f4f6f52b72c3a099c9cdac5d9c6034c76c commit 281e878eab191cce4259abbbf1a0322e3adae02c upstream. When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the hotplug_slot struct is deregistered and thus freed before freeing the IRQ. The IRQ handler and the work items it schedules print the slot name referenced from the freed structure in various informational and debug log messages, each time resulting in a quadruple dereference of freed pointers (hotplug_slot -> pci_slot -> kobject -> name). At best the slot name is logged as "(null)", at worst kernel memory is exposed in logs or the driver crashes: pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present An attacker may provoke the bug by unplugging multiple devices on a Thunderbolt daisy chain at once. Unplugging can also be simulated by powering down slots via sysfs. The bug is particularly easy to trigger in poll mode. It has been present since the driver's introduction in 2004: https://git.kernel.org/tglx/history/c/c16b4b14d980 Fix by rearranging teardown such that the IRQ is freed first. Run the work items queued by the IRQ handler to completion before freeing the hotplug_slot struct by draining the work queue from the ->release_slot callback which is invoked by pci_hp_deregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 281e878eab191cce4259abbbf1a0322e3adae02c upstream.

When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the
hotplug_slot struct is deregistered and thus freed before freeing the
IRQ.  The IRQ handler and the work items it schedules print the slot
name referenced from the freed structure in various informational and
debug log messages, each time resulting in a quadruple dereference of
freed pointers (hotplug_slot -> pci_slot -> kobject -> name).

At best the slot name is logged as "(null)", at worst kernel memory is
exposed in logs or the driver crashes:

  pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present

An attacker may provoke the bug by unplugging multiple devices on a
Thunderbolt daisy chain at once.  Unplugging can also be simulated by
powering down slots via sysfs.  The bug is particularly easy to trigger
in poll mode.

It has been present since the driver's introduction in 2004:
https://git.kernel.org/tglx/history/c/c16b4b14d980

Fix by rearranging teardown such that the IRQ is freed first.  Run the
work items queued by the IRQ handler to completion before freeing the
hotplug_slot struct by draining the work queue from the ->release_slot
callback which is invoked by pci_hp_deregister().

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Skip MPS logic for Virtual Functions (VFs) 2018-08-24T11:27:01+00:00 Myron Stowe myron.stowe@redhat.com 2018-08-13T18:19:39+00:00 cc7614a5e8ec4514aa27ee3874ad05a1057e644d commit 3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 upstream. PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for VFs. Just prior to the table it states: "PF and VF functionality is defined in Section 7.5.3.4 except where noted in Table 9-16. For VF fields marked 'RsvdP', the PF setting applies to the VF." All of which implies that with respect to Max_Payload_Size Supported (MPSS), MPS, and MRRS values, we should not be paying any attention to the VF's fields, but rather only to the PF's. Only looking at the PF's fields also logically makes sense as it's the sole physical interface to the PCIe bus. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527 Fixes: 27d868b5e6cf ("PCI: Set MPS to match upstream bridge") Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # 4.3+ Cc: Keith Busch <keith.busch@intel.com> Cc: Sinan Kaya <okaya@kernel.org> Cc: Dongdong Liu <liudongdong3@huawei.com> Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 upstream.

PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both
Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for
VFs.  Just prior to the table it states:

  "PF and VF functionality is defined in Section 7.5.3.4 except where
   noted in Table 9-16.  For VF fields marked 'RsvdP', the PF setting
   applies to the VF."

All of which implies that with respect to Max_Payload_Size Supported
(MPSS), MPS, and MRRS values, we should not be paying any attention to the
VF's fields, but rather only to the PF's.  Only looking at the PF's fields
also logically makes sense as it's the sole physical interface to the PCIe
bus.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527
Fixes: 27d868b5e6cf ("PCI: Set MPS to match upstream bridge")
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # 4.3+
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Dongdong Liu <liudongdong3@huawei.com>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hotplug: Don't leak pci_slot on registration failure 2018-08-24T11:27:01+00:00 Lukas Wunner lukas@wunner.de 2018-07-19T22:27:31+00:00 8837163ebeba0ab5cd82d8eb284060e0e3cb4a35 commit 4ce6435820d1f1cc2c2788e232735eb244bcc8a3 upstream. If addition of sysfs files fails on registration of a hotplug slot, the struct pci_slot as well as the entry in the slot_list is leaked. The issue has been present since the hotplug core was introduced in 2002: https://git.kernel.org/tglx/history/c/a8a2069f432c Perhaps the idea was that even though sysfs addition fails, the slot should still be usable. But that's not how drivers use the interface, they abort probe if a non-zero value is returned. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.4.15+ Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4ce6435820d1f1cc2c2788e232735eb244bcc8a3 upstream.

If addition of sysfs files fails on registration of a hotplug slot, the
struct pci_slot as well as the entry in the slot_list is leaked.  The
issue has been present since the hotplug core was introduced in 2002:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Perhaps the idea was that even though sysfs addition fails, the slot
should still be usable.  But that's not how drivers use the interface,
they abort probe if a non-zero value is returned.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.4.15+
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI / PCI: Bail early in acpi_pci_add_bus() if there is no ACPI handle 2018-08-09T10:19:28+00:00 Vitaly Kuznetsov vkuznets@redhat.com 2017-09-14T14:50:14+00:00 fef9866d278ee726b15cf251339660e77ba5488c commit a0040c0145945d3bd203df8fa97f6dfa819f3f7d upstream. Hyper-V instances support PCI pass-through which is implemented through PV pci-hyperv driver. When a device is passed through, a new root PCI bus is created in the guest. The bus sits on top of VMBus and has no associated information in ACPI. acpi_pci_add_bus() in this case proceeds all the way to acpi_evaluate_dsm(), which reports ACPI: \: failed to evaluate _DSM (0x1001) While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not and gives us the error. It seems the correct fix is to not do anything in acpi_pci_add_bus() in such cases. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a0040c0145945d3bd203df8fa97f6dfa819f3f7d upstream.

Hyper-V instances support PCI pass-through which is implemented through PV
pci-hyperv driver. When a device is passed through, a new root PCI bus is
created in the guest. The bus sits on top of VMBus and has no associated
information in ACPI. acpi_pci_add_bus() in this case proceeds all the way
to acpi_evaluate_dsm(), which reports

  ACPI: \: failed to evaluate _DSM (0x1001)

While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected
against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not
and gives us the error. It seems the correct fix is to not do anything in
acpi_pci_add_bus() in such cases.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Prevent sysfs disable of device while driver is attached 2018-08-06T14:24:33+00:00 Christoph Hellwig hch@lst.de 2018-05-18T16:56:24+00:00 549f4ee6884758a683ab1e0245987a8a7a38563a [ Upstream commit 6f5cdfa802733dcb561bf664cc89d203f2fd958f ] Manipulating the enable_cnt behind the back of the driver will wreak complete havoc with the kernel state, so disallow it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 6f5cdfa802733dcb561bf664cc89d203f2fd958f ]

Manipulating the enable_cnt behind the back of the driver will wreak
complete havoc with the kernel state, so disallow it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume 2018-07-03T09:21:30+00:00 Mika Westerberg mika.westerberg@linux.intel.com 2018-05-23T22:14:39+00:00 81562a508a39334e495690db10b775064107cd8b commit 13c65840feab8109194f9490c9870587173cb29d upstream. After a suspend/resume cycle the Presence Detect or Data Link Layer Status Changed bits might be set. If we don't clear them those events will not fire anymore and nothing happens for instance when a device is now hot-unplugged. Fix this by clearing those bits in a newly introduced function pcie_reenable_notification(). This should be fine because immediately after, we check if the adapter is still present by reading directly from the status register. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 13c65840feab8109194f9490c9870587173cb29d upstream.

After a suspend/resume cycle the Presence Detect or Data Link Layer Status
Changed bits might be set.  If we don't clear them those events will not
fire anymore and nothing happens for instance when a device is now
hot-unplugged.

Fix this by clearing those bits in a newly introduced function
pcie_reenable_notification().  This should be fine because immediately
after, we check if the adapter is still present by reading directly from
the status register.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 2018-05-30T05:49:15+00:00 Thomas Vincent-Cross me@tvc.id.au 2018-02-27T09:20:36+00:00 b23aad6880fad64c8d781b5723e0107f944f0960 [ Upstream commit 832e4e1f76b8a84991e9db56fdcef1ebce839b8b ] Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679 Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 832e4e1f76b8a84991e9db56fdcef1ebce839b8b ]

Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>