linux-stable.git/drivers/pci, branch v3.16.4 Linux kernel stable tree Revert "PCI: Make sure bus number resources stay within their parents bounds" 2014-10-05T20:41:10+00:00 Bjorn Helgaas bhelgaas@google.com 2014-09-19T17:08:40+00:00 512e6652813ab0ff04d351b6c31a42b8fd46e954 commit 12d8706963f073fffad16c7c24160ef20d9aeaff upstream. This reverts commit 1820ffdccb9b ("PCI: Make sure bus number resources stay within their parents bounds") because it breaks some systems with LSI Logic FC949ES Fibre Channel Adapters, apparently by exposing a defect in those adapters. Dirk tested a Tyan VX50 (B4985) with this device that worked like this prior to 1820ffdccb9b: bus: [bus 00-7f] on node 0 link 1 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) pci 0000:00:0e.0: PCI bridge to [bus 0a] pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07] (conflicts with (null) [bus 00-07]) pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400 (FC adapter) Note that the root bridge [bus 00-07] aperture is wrong; this is a BIOS defect in the PCI0 _CRS method. But prior to 1820ffdccb9b, we didn't enforce that aperture, and the FC adapter worked fine at 0a:00.0. After 1820ffdccb9b, we notice that 00:0e.0's aperture is not contained in the root bridge's aperture, so we reconfigure it so it *is* contained: pci 0000:00:0e.0: bridge configuration invalid ([bus 0a-0a]), reconfiguring pci 0000:00:0e.0: PCI bridge to [bus 06-07] This effectively moves the FC device from 0a:00.0 to 07:00.0, which should be legal. But when we enumerate bus 06, the FC device doesn't respond, so we don't find anything. This is probably a defect in the FC device. Possible fixes (due to Yinghai): 1) Add a quirk to fix the _CRS information based on what amd_bus.c read from the hardware 2) Reset the FC device after we change its bus number 3) Revert 1820ffdccb9b Fix 1 would be relatively easy, but it does sweep the LSI FC issue under the rug. We might want to reconfigure bus numbers in the future for some other reason, e.g., hotplug, and then we could trip over this again. For that reason, I like fix 2, but we don't know whether it actually works, and we don't have a patch for it yet. This revert is fix 3, which also sweeps the LSI FC issue under the rug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84281 Reported-by: Dirk Gouders <dirk@gouders.net> Tested-by: Dirk Gouders <dirk@gouders.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 12d8706963f073fffad16c7c24160ef20d9aeaff upstream.

This reverts commit 1820ffdccb9b ("PCI: Make sure bus number resources stay
within their parents bounds") because it breaks some systems with LSI Logic
FC949ES Fibre Channel Adapters, apparently by exposing a defect in those
adapters.

Dirk tested a Tyan VX50 (B4985) with this device that worked like this
prior to 1820ffdccb9b:

    bus: [bus 00-7f] on node 0 link 1
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07])
    pci 0000:00:0e.0: PCI bridge to [bus 0a]
    pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07] (conflicts with (null) [bus 00-07])
    pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400 (FC adapter)

Note that the root bridge [bus 00-07] aperture is wrong; this is a BIOS
defect in the PCI0 _CRS method.  But prior to 1820ffdccb9b, we didn't
enforce that aperture, and the FC adapter worked fine at 0a:00.0.

After 1820ffdccb9b, we notice that 00:0e.0's aperture is not contained in
the root bridge's aperture, so we reconfigure it so it *is* contained:

    pci 0000:00:0e.0: bridge configuration invalid ([bus 0a-0a]), reconfiguring
    pci 0000:00:0e.0: PCI bridge to [bus 06-07]

This effectively moves the FC device from 0a:00.0 to 07:00.0, which should
be legal.  But when we enumerate bus 06, the FC device doesn't respond, so
we don't find anything.  This is probably a defect in the FC device.

Possible fixes (due to Yinghai):

    1) Add a quirk to fix the _CRS information based on what amd_bus.c read
       from the hardware

    2) Reset the FC device after we change its bus number

    3) Revert 1820ffdccb9b

Fix 1 would be relatively easy, but it does sweep the LSI FC issue under
the rug.  We might want to reconfigure bus numbers in the future for some
other reason, e.g., hotplug, and then we could trip over this again.

For that reason, I like fix 2, but we don't know whether it actually works,
and we don't have a patch for it yet.

This revert is fix 3, which also sweeps the LSI FC issue under the rug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84281
Reported-by: Dirk Gouders <dirk@gouders.net>
Tested-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "PCI: Don't scan random busses in pci_scan_bridge()" 2014-10-05T20:41:09+00:00 Bjorn Helgaas bhelgaas@google.com 2014-09-19T16:56:06+00:00 4e3a0d9d0f7497e89870989d7dd94370d585c3f0 commit 7a0b33d4a45d30b9a838fba4efcd80b7b57d4d16 upstream. This reverts commit fc1b253141b3 ("PCI: Don't scan random busses in pci_scan_bridge()") because it breaks CardBus on some machines. David tested a Dell Latitude D505 that worked like this prior to fc1b253141b3: pci 0000:00:1e.0: PCI bridge to [bus 01] pci 0000:01:01.0: CardBus bridge to [bus 02-05] Note that the 01:01.0 CardBus bridge has a bus number aperture of [bus 02-05], but those buses are all outside the 00:1e.0 PCI bridge bus number aperture, so accesses to buses 02-05 never reach CardBus. This is later patched up by yenta_fixup_parent_bridge(), which changes the subordinate bus number of the 00:1e.0 PCI bridge: pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 With fc1b253141b3, pci_scan_bridge() fails immediately when it notices that we can't allocate a valid secondary bus number for the CardBus bridge, and CardBus doesn't work at all: pci 0000:01:01.0: can't allocate child bus 01 from [bus 01] I'd prefer to fix this by integrating the yenta_fixup_parent_bridge() logic into pci_scan_bridge() so we fix the bus number apertures up front. But I don't think we can do that before v3.17, so I'm going to revert this to avoid the problem while we're working on the long-term fix. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83441 Link: http://lkml.kernel.org/r/1409303414-5196-1-git-send-email-david.henningsson@canonical.com Reported-by: David Henningsson <david.henningsson@canonical.com> Tested-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7a0b33d4a45d30b9a838fba4efcd80b7b57d4d16 upstream.

This reverts commit fc1b253141b3 ("PCI: Don't scan random busses in
pci_scan_bridge()") because it breaks CardBus on some machines.

David tested a Dell Latitude D505 that worked like this prior to
fc1b253141b3:

    pci 0000:00:1e.0: PCI bridge to [bus 01]
    pci 0000:01:01.0: CardBus bridge to [bus 02-05]

Note that the 01:01.0 CardBus bridge has a bus number aperture of
[bus 02-05], but those buses are all outside the 00:1e.0 PCI bridge bus
number aperture, so accesses to buses 02-05 never reach CardBus.  This is
later patched up by yenta_fixup_parent_bridge(), which changes the
subordinate bus number of the 00:1e.0 PCI bridge:

    pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05

With fc1b253141b3, pci_scan_bridge() fails immediately when it notices that
we can't allocate a valid secondary bus number for the CardBus bridge, and
CardBus doesn't work at all:

    pci 0000:01:01.0: can't allocate child bus 01 from [bus 01]

I'd prefer to fix this by integrating the yenta_fixup_parent_bridge() logic
into pci_scan_bridge() so we fix the bus number apertures up front.  But
I don't think we can do that before v3.17, so I'm going to revert this to
avoid the problem while we're working on the long-term fix.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=83441
Link: http://lkml.kernel.org/r/1409303414-5196-1-git-send-email-david.henningsson@canonical.com
Reported-by: David Henningsson <david.henningsson@canonical.com>
Tested-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device 2014-10-05T20:41:09+00:00 Bjorn Helgaas bhelgaas@google.com 2014-09-10T19:45:01+00:00 a4c5f39c22082dd53a95e2c63aa3d4ed9805fad4 commit b440bde74f043c8ec31081cb59c9a53ade954701 upstream. Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold), normally generates a hot-remove event that unbinds the driver. Some drivers expect to remain bound to a device even while they power it off and back on again. This can be dangerous, because if the device is removed or replaced while it is powered off, the driver doesn't know that anything changed. But some drivers accept that risk. Add pci_ignore_hotplug() for use by drivers that know their device cannot be removed. Using pci_ignore_hotplug() tells the PCI core that hot-plug events for the device should be ignored. The radeon and nouveau drivers use this to switch between a low-power, integrated GPU and a higher-power, higher-performance discrete GPU. They power off the unused GPU, but they want to remain bound to it. This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug") but extends it to work with both acpiphp and pciehp. This fixes a problem where systems with dual GPUs using the radeon drivers become unusable, freezing every few seconds (see bugzillas below). The resume of the radeon device may also fail, e.g., This fixes problems on dual GPU systems where the radeon driver becomes unusable because of problems while suspending the device, as in bug 79701: [drm] radeon: finishing device. radeon 0000:01:00.0: Userspace still has active objects ! radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free ... WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]() trying to unbind memory from uninitialized GART ! or while resuming it, as in bug 77261: radeon 0000:01:00.0: ring 0 stalled for more than 10158msec radeon 0000:01:00.0: GPU lockup ... radeon 0000:01:00.0: GPU pci config reset pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1) radeon 0000:01:00.0: GPU reset succeeded, trying to resume *ERROR* radeon: dpm resume failed radeon 0000:01:00.0: Wait for MC idle timedout ! Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261 Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701 Reported-by: Shawn Starr <shawn.starr@rogers.com> Reported-by: Jose P. <lbdkmjdf@sharklasers.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajat Jain <rajatxjain@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b440bde74f043c8ec31081cb59c9a53ade954701 upstream.

Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold),
normally generates a hot-remove event that unbinds the driver.

Some drivers expect to remain bound to a device even while they power it
off and back on again.  This can be dangerous, because if the device is
removed or replaced while it is powered off, the driver doesn't know that
anything changed.  But some drivers accept that risk.

Add pci_ignore_hotplug() for use by drivers that know their device cannot
be removed.  Using pci_ignore_hotplug() tells the PCI core that hot-plug
events for the device should be ignored.

The radeon and nouveau drivers use this to switch between a low-power,
integrated GPU and a higher-power, higher-performance discrete GPU.  They
power off the unused GPU, but they want to remain bound to it.

This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau:
Fix VGA switcheroo problem related to hotplug") but extends it to work with
both acpiphp and pciehp.

This fixes a problem where systems with dual GPUs using the radeon drivers
become unusable, freezing every few seconds (see bugzillas below).  The
resume of the radeon device may also fail, e.g.,

This fixes problems on dual GPU systems where the radeon driver becomes
unusable because of problems while suspending the device, as in bug 79701:

    [drm] radeon: finishing device.
    radeon 0000:01:00.0: Userspace still has active objects !
    radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free
    ...
    WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]()
    trying to unbind memory from uninitialized GART !

or while resuming it, as in bug 77261:

    radeon 0000:01:00.0: ring 0 stalled for more than 10158msec
    radeon 0000:01:00.0: GPU lockup ...
    radeon 0000:01:00.0: GPU pci config reset
    pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1)
    radeon 0000:01:00.0: GPU reset succeeded, trying to resume
    *ERROR* radeon: dpm resume failed
    radeon 0000:01:00.0: Wait for MC idle timedout !

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701
Reported-by: Shawn Starr <shawn.starr@rogers.com>
Reported-by: Jose P. <lbdkmjdf@sharklasers.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajat Jain <rajatxjain@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI / PCI: Fix sysfs acpi_index and label errors 2014-09-05T23:36:34+00:00 Simone Gotti simone.gotti@gmail.com 2014-06-18T14:55:30+00:00 3b7d7354294b0741da9853c7b0218d123f1bcada commit dcfa9be83866e28fcb8b7e22b4eeb4ba63bd3174 upstream. Fix errors in handling "device label" _DSM return values. If _DSM returns a Unicode string, the ACPI type is ACPI_TYPE_BUFFER, not ACPI_TYPE_STRING. Fix dsm_label_utf16s_to_utf8s() to convert UTF-16 from acpi_object->buffer instead of acpi_object->string. Prior to v3.14, we accepted Unicode labels (ACPI_TYPE_BUFFER return values). But after 1d0fcef73283, we accepted only ASCII (ACPI_TYPE_STRING) (and we incorrectly tried to convert those ASCII labels from UTF-16 to UTF-8). Rejecting Unicode labels made us return -EPERM when reading sysfs "acpi_index" or "label" files, which in turn caused on-board network interfaces on a Dell PowerEdge E420 to be renamed (by udev net_id internal) from eno1/eno2 to enp2s0f0/enp2s0f1. Fix this by accepting either ACPI_TYPE_STRING (and treating it as ASCII) or ACPI_TYPE_BUFFER (and converting from UTF-16 to UTF-8). [bhelgaas: changelog] Fixes: 1d0fcef73283 ("ACPI / PCI: replace open-coded _DSM code with helper functions") Signed-off-by: Simone Gotti <simone.gotti@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dcfa9be83866e28fcb8b7e22b4eeb4ba63bd3174 upstream.

Fix errors in handling "device label" _DSM return values.

If _DSM returns a Unicode string, the ACPI type is ACPI_TYPE_BUFFER, not
ACPI_TYPE_STRING.  Fix dsm_label_utf16s_to_utf8s() to convert UTF-16 from
acpi_object->buffer instead of acpi_object->string.

Prior to v3.14, we accepted Unicode labels (ACPI_TYPE_BUFFER return
values).  But after 1d0fcef73283, we accepted only ASCII (ACPI_TYPE_STRING)
(and we incorrectly tried to convert those ASCII labels from UTF-16 to
UTF-8).

Rejecting Unicode labels made us return -EPERM when reading sysfs
"acpi_index" or "label" files, which in turn caused on-board network
interfaces on a Dell PowerEdge E420 to be renamed (by udev net_id internal)
from eno1/eno2 to enp2s0f0/enp2s0f1.

Fix this by accepting either ACPI_TYPE_STRING (and treating it as ASCII) or
ACPI_TYPE_BUFFER (and converting from UTF-16 to UTF-8).

[bhelgaas: changelog]
Fixes: 1d0fcef73283 ("ACPI / PCI: replace open-coded _DSM code with helper functions")
Signed-off-by: Simone Gotti <simone.gotti@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: pciehp: Clear Data Link Layer State Changed during init 2014-09-05T23:36:34+00:00 Myron Stowe myron.stowe@redhat.com 2014-06-17T19:27:34+00:00 5de9628c8b21e8bf960b6709198eb506029de173 commit 0d25d35c987d7b0b63368d9c1ae35a917e1a7bab upstream. During PCIe hot-plug initialization - pciehp_probe() - data structures related to slot capabilities are set up. As part of this set up, ISRs are put in place to handle slot events and all event bits are cleared out. This patch adds the Data Link Layer State Changed (PCI_EXP_SLTSTA_DLLSC) Slot Status bit to the event bits that are cleared out during initialization. If the BIOS doesn't clear DLLSC before handoff to the OS, pciehp notices that it's set and interprets it as a new Link Up event, which results in spurious messages: pciehp 0000:82:04.0:pcie24: slot(4): Link Up event pciehp 0000:82:04.0:pcie24: Device 0000:83:00.0 already exists at 0000:83:00, cannot hot-add pciehp 0000:82:04.0:pcie24: Cannot add device at 0000:83:00 Prior to e48f1b67f668 ("PCI: pciehp: Use link change notifications for hot-plug and removal"), pciehp ignored DLLSC. Reference: PCI-SIG. PCI Express Base Specification Revision 4.0 Version 0.3 (PCI-SIG, 2014): 7.8.11. Slot Status Register (Offset 1Ah). [bhelgaas: add e48f1b67f668 ref and stable tag] Fixes: e48f1b67f668 ("PCI: pciehp: Use link change notifications for hot-plug and removal") Link: https://bugzilla.kernel.org/show_bug.cgi?id=79611 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0d25d35c987d7b0b63368d9c1ae35a917e1a7bab upstream.

During PCIe hot-plug initialization - pciehp_probe() - data structures
related to slot capabilities are set up.  As part of this set up, ISRs are
put in place to handle slot events and all event bits are cleared out.

This patch adds the Data Link Layer State Changed (PCI_EXP_SLTSTA_DLLSC)
Slot Status bit to the event bits that are cleared out during
initialization.

If the BIOS doesn't clear DLLSC before handoff to the OS, pciehp notices
that it's set and interprets it as a new Link Up event, which results in
spurious messages:

  pciehp 0000:82:04.0:pcie24: slot(4): Link Up event
  pciehp 0000:82:04.0:pcie24: Device 0000:83:00.0 already exists at 0000:83:00, cannot hot-add
  pciehp 0000:82:04.0:pcie24: Cannot add device at 0000:83:00

Prior to e48f1b67f668 ("PCI: pciehp: Use link change notifications for
hot-plug and removal"), pciehp ignored DLLSC.

Reference:
  PCI-SIG.  PCI Express Base Specification Revision 4.0 Version 0.3
  (PCI-SIG, 2014): 7.8.11. Slot Status Register (Offset 1Ah).

[bhelgaas: add e48f1b67f668 ref and stable tag]
Fixes: e48f1b67f668 ("PCI: pciehp: Use link change notifications for hot-plug and removal")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79611
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Keep original resource if we fail to expand it 2014-09-05T23:36:34+00:00 Guo Chao yan@linux.vnet.ibm.com 2014-07-04T00:30:29+00:00 360049733665da5875bbe91d26d029575b768656 commit c33377082dd9ede1e998f7ce416077e4b1c2276c upstream. If we have space assigned to a resource, we try to expand the resource (e.g., to accommodate SR-IOV resources), and the expansion attempt fails, we should keep the original assignment. After bd064f0a231a ("PCI: Mark resources as IORESOURCE_UNSET if we can't assign them"), we left the resource marked IORESOURCE_UNSET when the expansion failed, even if it had originally been set. That caused errors like this: pci 0003:00:00.0: can't enable device: BAR 15 [mem size 0x0c000000 64bit pref] not assigned pci 0003:00:00.0: Error enabling bridge (-22), continuing Fix this by restoring the original flags when reassignment fails. [bhelgaas: reworked to simplify, changelog] Fixes: bd064f0a231a ("PCI: Mark resources as IORESOURCE_UNSET if we can't assign them") Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c33377082dd9ede1e998f7ce416077e4b1c2276c upstream.

If we have space assigned to a resource, we try to expand the resource
(e.g., to accommodate SR-IOV resources), and the expansion attempt fails,
we should keep the original assignment.

After bd064f0a231a ("PCI: Mark resources as IORESOURCE_UNSET if we can't
assign them"), we left the resource marked IORESOURCE_UNSET when the
expansion failed, even if it had originally been set.  That caused errors
like this:

  pci 0003:00:00.0: can't enable device: BAR 15 [mem size 0x0c000000 64bit pref] not assigned
  pci 0003:00:00.0: Error enabling bridge (-22), continuing

Fix this by restoring the original flags when reassignment fails.

[bhelgaas: reworked to simplify, changelog]
Fixes: bd064f0a231a ("PCI: Mark resources as IORESOURCE_UNSET if we can't assign them")
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Configure ASPM when enabling device 2014-09-05T23:36:34+00:00 Vidya Sagar sagar.tv@gmail.com 2014-07-16T10:03:42+00:00 3ade630fc60a19d1176cc88f46199b2a49d0a779 commit 1f6ae47ecff7f23da73417e068018b311f3b5583 upstream. We can't do ASPM configuration at enumeration-time because enabling it makes some defective hardware unresponsive, even if ASPM is disabled later (see 41cd766b0659 ("PCI: Don't enable aspm before drivers have had a chance to veto it"). Therefore, we have to do it after a driver claims the device. We previously configured ASPM in pci_set_power_state(), but that's not a very good place because it's not really related to setting the PCI device power state, and doing it there means: - We incorrectly skipped ASPM config when setting a device that's already in D0 to D0. - We unnecessarily configured ASPM when setting a device to a low-power state (the ASPM feature only applies when the device is in D0). - We unnecessarily configured ASPM when called from a .resume() method (ASPM configuration needs to be restored during resume, but pci_restore_pcie_state() should already do this). Move ASPM configuration from pci_set_power_state() to do_pci_enable_device() so we do it when a driver enables a device. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=79621 Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()") Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Vidya Sagar <sagar.tv@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f6ae47ecff7f23da73417e068018b311f3b5583 upstream.

We can't do ASPM configuration at enumeration-time because enabling it
makes some defective hardware unresponsive, even if ASPM is disabled later
(see 41cd766b0659 ("PCI: Don't enable aspm before drivers have had a chance
to veto it").  Therefore, we have to do it after a driver claims the
device.

We previously configured ASPM in pci_set_power_state(), but that's not a
very good place because it's not really related to setting the PCI device
power state, and doing it there means:

  - We incorrectly skipped ASPM config when setting a device that's
    already in D0 to D0.

  - We unnecessarily configured ASPM when setting a device to a low-power
    state (the ASPM feature only applies when the device is in D0).

  - We unnecessarily configured ASPM when called from a .resume() method
    (ASPM configuration needs to be restored during resume, but
    pci_restore_pcie_state() should already do this).

Move ASPM configuration from pci_set_power_state() to
do_pci_enable_device() so we do it when a driver enables a device.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79621
Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()")
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Vidya Sagar <sagar.tv@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Fix unaligned access in AF transaction pending test 2014-06-17T21:40:13+00:00 Alex Williamson alex.williamson@redhat.com 2014-06-17T21:40:13+00:00 d066c946a866268c14a120b33e7226e899981998 pci_wait_for_pending() uses word access, so we shouldn't be passing an offset that is only byte aligned. Use the control register offset instead, shifting the mask to match. Fixes: d0b4cc4e3270 ("PCI: Wrong register used to check pending traffic") Fixes: 157e876ffe0b ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction()) Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> CC: stable@vger.kernel.org # v3.14+ 
pci_wait_for_pending() uses word access, so we shouldn't be passing
an offset that is only byte aligned.  Use the control register offset
instead, shifting the mask to match.

Fixes: d0b4cc4e3270 ("PCI: Wrong register used to check pending traffic")
Fixes: 157e876ffe0b ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction())
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
CC: stable@vger.kernel.org	# v3.14+
 Merge tag 'pci-v3.16-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2014-06-12T20:20:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-06-12T20:20:24+00:00 7550cfab3d4053b54f16e2fe337affde71d1eb51 Pull more PCI updates from Bjorn Helgaas: "Here are some more things I'd like to see in v3.16-rc1: - DMA alias iterator, part of some work to fix IOMMU issues - MVEBU, Tegra, DesignWare changes that I forgot to include before - Some whitespace code cleanup Details: IOMMU - Add DMA alias iterator (Alex Williamson) - Add DMA alias quirks for ASMedia, ITE, Tundra bridges (Alex Williamson) - Add DMA alias quirks for Marvell, Ricoh devices (Alex Williamson) - Add DMA alias quirk for HighPoint devices (Jérôme Carretero) MSI - Fix leak in free_msi_irqs() (Alexei Starovoitov) Marvell MVEBU - Remove unnecessary use of 'conf_lock' spinlock (Andrew Murray) - Avoid setting an undefined window size (Jason Gunthorpe) - Allow several windows with the same target/attribute (Thomas Petazzoni) - Split PCIe BARs into multiple MBus windows when needed (Thomas Petazzoni) - Fix off-by-one in the computed size of the mbus windows (Willy Tarreau) NVIDIA Tegra - Use new OF interrupt mapping when possible (Lucas Stach) Synopsys DesignWare - Remove unnecessary use of 'conf_lock' spinlock (Andrew Murray) - Use new OF interrupt mapping when possible (Lucas Stach) - Split Exynos and i.MX bindings (Lucas Stach) - Fix comment for setting number of lanes (Mohit Kumar) - Fix iATU programming for cfg1, io and mem viewport (Mohit Kumar) Miscellaneous - EXPORT_SYMBOL cleanup (Ryan Desfosses) - Whitespace cleanup (Ryan Desfosses) - Merge multi-line quoted strings (Ryan Desfosses)" * tag 'pci-v3.16-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits) PCI: Add function 1 DMA alias quirk for HighPoint RocketRaid 642L PCI/MSI: Fix memory leak in free_msi_irqs() PCI: Merge multi-line quoted strings PCI: Whitespace cleanup PCI: Move EXPORT_SYMBOL so it immediately follows function/variable PCI: Add bridge DMA alias quirk for ITE bridge PCI: designware: Split Exynos and i.MX bindings PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges PCI: Add support for PCIe-to-PCI bridge DMA alias quirks PCI: Add function 1 DMA alias quirk for Marvell devices PCI: Add function 0 DMA alias quirk for Ricoh devices PCI: Add support for DMA alias quirks PCI: Convert pci_dev_flags definitions to bit shifts PCI: Add DMA alias iterator PCI: mvebu: Use '%pa' for printing 'phys_addr_t' type PCI: mvebu: Remove unnecessary use of 'conf_lock' spinlock PCI: designware: Remove unnecessary use of 'conf_lock' spinlock PCI: designware: Use new OF interrupt mapping when possible PCI: designware: Fix iATU programming for cfg1, io and mem viewport PCI: designware: Fix comment for setting number of lanes ... 
Pull more PCI updates from Bjorn Helgaas:
 "Here are some more things I'd like to see in v3.16-rc1:

   - DMA alias iterator, part of some work to fix IOMMU issues
   - MVEBU, Tegra, DesignWare changes that I forgot to include before
   - Some whitespace code cleanup

  Details:

  IOMMU
    - Add DMA alias iterator (Alex Williamson)
    - Add DMA alias quirks for ASMedia, ITE, Tundra bridges (Alex Williamson)
    - Add DMA alias quirks for Marvell, Ricoh devices (Alex Williamson)
    - Add DMA alias quirk for HighPoint devices (Jérôme Carretero)

  MSI
    - Fix leak in free_msi_irqs() (Alexei Starovoitov)

  Marvell MVEBU
    - Remove unnecessary use of 'conf_lock' spinlock (Andrew Murray)
    - Avoid setting an undefined window size (Jason Gunthorpe)
    - Allow several windows with the same target/attribute (Thomas Petazzoni)
    - Split PCIe BARs into multiple MBus windows when needed (Thomas Petazzoni)
    - Fix off-by-one in the computed size of the mbus windows (Willy Tarreau)

  NVIDIA Tegra
    - Use new OF interrupt mapping when possible (Lucas Stach)

  Synopsys DesignWare
    - Remove unnecessary use of 'conf_lock' spinlock (Andrew Murray)
    - Use new OF interrupt mapping when possible (Lucas Stach)
    - Split Exynos and i.MX bindings (Lucas Stach)
    - Fix comment for setting number of lanes (Mohit Kumar)
    - Fix iATU programming for cfg1, io and mem viewport (Mohit Kumar)

  Miscellaneous
    - EXPORT_SYMBOL cleanup (Ryan Desfosses)
    - Whitespace cleanup (Ryan Desfosses)
    - Merge multi-line quoted strings (Ryan Desfosses)"

* tag 'pci-v3.16-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits)
  PCI: Add function 1 DMA alias quirk for HighPoint RocketRaid 642L
  PCI/MSI: Fix memory leak in free_msi_irqs()
  PCI: Merge multi-line quoted strings
  PCI: Whitespace cleanup
  PCI: Move EXPORT_SYMBOL so it immediately follows function/variable
  PCI: Add bridge DMA alias quirk for ITE bridge
  PCI: designware: Split Exynos and i.MX bindings
  PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges
  PCI: Add support for PCIe-to-PCI bridge DMA alias quirks
  PCI: Add function 1 DMA alias quirk for Marvell devices
  PCI: Add function 0 DMA alias quirk for Ricoh devices
  PCI: Add support for DMA alias quirks
  PCI: Convert pci_dev_flags definitions to bit shifts
  PCI: Add DMA alias iterator
  PCI: mvebu: Use '%pa' for printing 'phys_addr_t' type
  PCI: mvebu: Remove unnecessary use of 'conf_lock' spinlock
  PCI: designware: Remove unnecessary use of 'conf_lock' spinlock
  PCI: designware: Use new OF interrupt mapping when possible
  PCI: designware: Fix iATU programming for cfg1, io and mem viewport
  PCI: designware: Fix comment for setting number of lanes
  ...
Merge tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2014-06-12T20:14:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-06-12T20:14:19+00:00 19c1940feab777bb037c665a09f495d08a6c4e6c Pull more ACPI and power management updates from Rafael Wysocki: "These are fixups on top of the previous PM+ACPI pull request, regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes (ACPI reset, cpufreq), new PM trace points for system suspend profiling and a copyright notice update. Specifics: - I didn't remember correctly that the Hans de Goede's ACPI video patches actually didn't flip the video.use_native_backlight default, although we had discussed that and decided to do that. Since I said we would do that in the previous PM+ACPI pull request, make that change for real now. - ACPI bus check notifications for PCI host bridges don't cause the bus below the host bridge to be checked for changes as they should because of a mistake in the ACPI-based PCI hotplug (ACPIPHP) subsystem that forgets to add hotplug contexts to PCI host bridge ACPI device objects. Create hotplug contexts for PCI host bridges too as appropriate. - Revert recent cpufreq commit related to the big.LITTLE cpufreq driver that breaks arm64 builds. - Fix for a regression in the ppc-corenet cpufreq driver introduced during the 3.15 cycle and causing the driver to use the remainder from do_div instead of the quotient. From Ed Swarthout. - Resets triggered by panic activate a BUG_ON() in vmalloc.c on systems where the ACPI reset register is located in memory address space. Fix from Randy Wright. - Fix for a problem with cpufreq governors that decisions made by them may be suboptimal due to the fact that deferrable timers are used by them for CPU load sampling. From Srivatsa S Bhat. - Fix for a problem with the Tegra cpufreq driver where the CPU frequency is temporarily switched to a "stable" level that is different from both the initial and target frequencies during transitions which causes udelay() to expire earlier than it should sometimes. From Viresh Kumar. - New trace points and rework of some existing trace points for system suspend/resume profiling from Todd Brandt. - Assorted cpufreq fixes and cleanups from Stratos Karafotis and Viresh Kumar. - Copyright notice update for suspend-and-cpuhotplug.txt from Srivatsa S Bhat" * tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges PM / sleep: trace events for device PM callbacks cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR cpufreq: tegra: update comment for clarity cpufreq: intel_pstate: Remove duplicate CPU ID check cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info' cpufreq: governor: Be friendly towards latency-sensitive bursty workloads PM / sleep: trace events for suspend/resume cpufreq: ppc-corenet-cpu-freq: do_div use quotient Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64" cpufreq: Tegra: implement intermediate frequency callbacks cpufreq: add support for intermediate (stable) frequencies ACPI / video: Change the default for video.use_native_backlight to 1 ACPI: Fix bug when ACPI reset register is implemented in system memory 
Pull more ACPI and power management updates from Rafael Wysocki:
 "These are fixups on top of the previous PM+ACPI pull request,
  regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes
  (ACPI reset, cpufreq), new PM trace points for system suspend
  profiling and a copyright notice update.

  Specifics:

   - I didn't remember correctly that the Hans de Goede's ACPI video
     patches actually didn't flip the video.use_native_backlight
     default, although we had discussed that and decided to do that.
     Since I said we would do that in the previous PM+ACPI pull request,
     make that change for real now.

   - ACPI bus check notifications for PCI host bridges don't cause the
     bus below the host bridge to be checked for changes as they should
     because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
     subsystem that forgets to add hotplug contexts to PCI host bridge
     ACPI device objects.  Create hotplug contexts for PCI host bridges
     too as appropriate.

   - Revert recent cpufreq commit related to the big.LITTLE cpufreq
     driver that breaks arm64 builds.

   - Fix for a regression in the ppc-corenet cpufreq driver introduced
     during the 3.15 cycle and causing the driver to use the remainder
     from do_div instead of the quotient.  From Ed Swarthout.

   - Resets triggered by panic activate a BUG_ON() in vmalloc.c on
     systems where the ACPI reset register is located in memory address
     space.  Fix from Randy Wright.

   - Fix for a problem with cpufreq governors that decisions made by
     them may be suboptimal due to the fact that deferrable timers are
     used by them for CPU load sampling.  From Srivatsa S Bhat.

   - Fix for a problem with the Tegra cpufreq driver where the CPU
     frequency is temporarily switched to a "stable" level that is
     different from both the initial and target frequencies during
     transitions which causes udelay() to expire earlier than it should
     sometimes.  From Viresh Kumar.

   - New trace points and rework of some existing trace points for
     system suspend/resume profiling from Todd Brandt.

   - Assorted cpufreq fixes and cleanups from Stratos Karafotis and
     Viresh Kumar.

   - Copyright notice update for suspend-and-cpuhotplug.txt from
     Srivatsa S Bhat"

* tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges
  PM / sleep: trace events for device PM callbacks
  cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
  cpufreq: tegra: update comment for clarity
  cpufreq: intel_pstate: Remove duplicate CPU ID check
  cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt
  cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
  cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
  PM / sleep: trace events for suspend/resume
  cpufreq: ppc-corenet-cpu-freq: do_div use quotient
  Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
  cpufreq: Tegra: implement intermediate frequency callbacks
  cpufreq: add support for intermediate (stable) frequencies
  ACPI / video: Change the default for video.use_native_backlight to 1
  ACPI: Fix bug when ACPI reset register is implemented in system memory