linux-stable.git/drivers/pci, branch v3.14.76

PCI: Disable all BAR sizing for devices with non-compliant BARs

2016-06-08T00:21:57+00:00

commit ad67b437f187ea818b2860524d10f878fadfdd99 upstream.

b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant
BARs") disabled BAR sizing for BARs 0-5 of devices that don't comply with
the PCI spec.  But it didn't do anything for expansion ROM BARs, so we
still try to size them, resulting in warnings like this on Broadwell-EP:

  pci 0000:ff:12.0: BAR 6: failed to assign [mem size 0x00000001 pref]

Move the non-compliant BAR check from __pci_read_base() up to
pci_read_bases() so it applies to the expansion ROM BAR as well as
to BARs 0-5.

Note that direct callers of __pci_read_base(), like sriov_init(), will now
bypass this check.  We haven't had reports of devices with broken SR-IOV
BARs yet.

[bhelgaas: changelog]
Fixes: b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs")
Signed-off-by: Prarit Bhargava 
Signed-off-by: Bjorn Helgaas 
CC: Thomas Gleixner 
CC: Ingo Molnar 
CC: "H. Peter Anvin" 
CC: Andi Kleen 
Signed-off-by: Greg Kroah-Hartman

PCI: Disable IO/MEM decoding for devices with non-compliant BARs

2016-04-12T16:12:39+00:00

commit b84106b4e2290c081cdab521fa832596cdfea246 upstream.

The PCI config header (first 64 bytes of each device's config space) is
defined by the PCI spec so generic software can identify the device and
manage its usage of I/O, memory, and IRQ resources.

Some non-spec-compliant devices put registers other than BARs where the
BARs should be.  When the PCI core sizes these "BARs", the reads and writes
it does may have unwanted side effects, and the "BAR" may appear to
describe non-sensical address space.

Add a flag bit to mark non-compliant devices so we don't touch their BARs.
Turn off IO/MEM decoding to prevent the devices from consuming address
space, since we can't read the BARs to find out what that address space
would be.

Signed-off-by: Bjorn Helgaas 
Tested-by: Andi Kleen 
Signed-off-by: Greg Kroah-Hartman

xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.

2016-03-03T23:06:54+00:00

commit 4d8c8bd6f2062c9988817183a91fe2e623c8aa5e upstream.

Occasionaly PV guests would crash with:

pciback 0000:00:00.1: Xen PCI mapped GSI0 to IRQ16
BUG: unable to handle kernel paging request at 0000000d1a8c0be0
.. snip..
  ] find_next_bit+0xb/0x10
  [] cpumask_next_and+0x22/0x40
  [] pci_device_probe+0xb8/0x120
  [] ? driver_sysfs_add+0x77/0xa0
  [] driver_probe_device+0x1a4/0x2d0
  [] ? pci_match_device+0xdd/0x110
  [] __device_attach_driver+0xa7/0xb0
  [] ? __driver_attach+0xa0/0xa0
  [] bus_for_each_drv+0x62/0x90
  [] __device_attach+0xbd/0x110
  [] device_attach+0xb/0x10
  [] pci_bus_add_device+0x3c/0x70
  [] pci_bus_add_devices+0x38/0x80
  [] pcifront_scan_root+0x13e/0x1a0
  [] pcifront_backend_changed+0x262/0x60b
  [] ? xenbus_gather+0xd6/0x160
  [] ? put_object+0x2f/0x50
  [] xenbus_otherend_changed+0x9d/0xa0
  [] backend_changed+0xe/0x10
  [] xenwatch_thread+0xc8/0x190
  [] ? woken_wake_function+0x10/0x10

which was the result of two things:

When we call pci_scan_root_bus we would pass in 'sd' (sysdata)
pointer which was an 'pcifront_sd' structure. However in the
pci_device_add it expects that the 'sd' is 'struct sysdata' and
sets the dev->node to what is in sd->node (offset 4):

set_dev_node(&dev->dev, pcibus_to_node(bus));

 __pcibus_to_node(const struct pci_bus *bus)
{
        const struct pci_sysdata *sd = bus->sysdata;

        return sd->node;
}

However our structure was pcifront_sd which had nothing at that
offset:

struct pcifront_sd {
        int                        domain;    /*     0     4 */
        /* XXX 4 bytes hole, try to pack */
        struct pcifront_device *   pdev;      /*     8     8 */
}

That is an hole - filled with garbage as we used kmalloc instead of
kzalloc (the second problem).

This patch fixes the issue by:
 1) Use kzalloc to initialize to a well known state.
 2) Put 'struct pci_sysdata' at the start of 'pcifront_sd'. That
    way access to the 'node' will access the right offset.

Signed-off-by: Konrad Rzeszutek Wilk 
Reviewed-by: Boris Ostrovsky 
Signed-off-by: David Vrabel 
Signed-off-by: Greg Kroah-Hartman

PCI/AER: Flush workqueue on device remove to avoid use-after-free

2016-03-03T23:06:53+00:00

commit 4ae2182b1e3407de369f8c5d799543b7db74221b upstream.

A Root Port's AER structure (rpc) contains a queue of events.  aer_irq()
enqueues AER status information and schedules aer_isr() to dequeue and
process it.  When we remove a device, aer_remove() waits for the queue to
be empty, then frees the rpc struct.

But aer_isr() references the rpc struct after dequeueing and possibly
emptying the queue, which can cause a use-after-free error as in the
following scenario with two threads, aer_isr() on the left and a
concurrent aer_remove() on the right:

  Thread A                      Thread B
  --------                      --------
  aer_irq():
    rpc->prod_idx++
                                aer_remove():
                                  wait_event(rpc->prod_idx == rpc->cons_idx)
                                  # now blocked until queue becomes empty
  aer_isr():                      # ...
    rpc->cons_idx++               # unblocked because queue is now empty
    ...                           kfree(rpc)
    mutex_unlock(&rpc->rpc_mutex)

To prevent this problem, use flush_work() to wait until the last scheduled
instance of aer_isr() has completed before freeing the rpc struct in
aer_remove().

I reproduced this use-after-free by flashing a device FPGA and
re-enumerating the bus to find the new device.  With SLUB debug, this
crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in
GPR25:

  pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000
  Unable to handle kernel paging request for data at address 0x27ef9e3e
  Workqueue: events aer_isr
  GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0
  NIP [602f5328] pci_walk_bus+0xd4/0x104

[bhelgaas: changelog, stable tag]
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()

2016-03-03T23:06:52+00:00

commit 2c3033a0664dfae91e1dee7fabac10f24354b958 upstream.

In acpiphp_enable_slot(), there is a missing unlock path
when error occurred.  It needs to be unlocked before returning
an error.

Signed-off-by: Insu Yun 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PCI: Fix minimum allocation address overwrite

2016-02-17T20:34:35+00:00

commit 3460baa620685c20f5ee19afb6d99d26150c382c upstream.

Commit 36e097a8a297 ("PCI: Split out bridge window override of minimum
allocation address") claimed to do no functional changes but unfortunately
did: The "min" variable is altered.  At least the AVM A1 PCMCIA adapter was
no longer detected, breaking ISDN operation.

Use a local copy of "min" to restore the previous behaviour.

[bhelgaas: avoid gcc "?:" extension for portability and readability]
Fixes: 36e097a8a297 ("PCI: Split out bridge window override of minimum allocation address")
Signed-off-by: Christoph Biedl 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI: Fix TI816X class code quirk

2015-09-21T17:02:17+00:00

commit d1541dc977d376406f4584d8eb055488655c98ec upstream.

In fixup_ti816x_class(), we assigned "class = PCI_CLASS_MULTIMEDIA_VIDEO".
But PCI_CLASS_MULTIMEDIA_VIDEO is only the two-byte base class/sub-class
and needs to be shifted to make space for the low-order interface byte.

Shift PCI_CLASS_MULTIMEDIA_VIDEO to set the correct class code.

Fixes: 63c4408074cb ("PCI: Add quirk for setting valid class for TI816X Endpoint")
Signed-off-by: Bjorn Helgaas 
CC: Hemant Pedanekar 
Signed-off-by: Greg Kroah-Hartman

PCI/AER: Avoid info leak in __print_tlp_header()

2015-04-19T08:11:05+00:00

commit a1b7f2f6367944d445c6853035830a35c6343939 upstream.

Commit fab4c256a58b ("PCI/AER: Add a TLP header print helper") introduced
the helper function __print_tlp_header(), but contrary to the intention,
the behaviour did change: Since we're taking the address of the parameter
t, the first 4 or 8 bytes printed will be the value of the pointer t
itself, and the remaining 12 or 8 bytes will be who-knows-what (something
from the stack).

We want to show the values of the four members of the struct
aer_header_log_regs; that can be done without ugly and error-prone casts.
On little-endian this should produce the same output as originally
intended, and since no-one has complained about getting garbage output so
far, I think big-endian should be ok too.

Fixes: fab4c256a58b ("PCI/AER: Add a TLP header print helper")
Signed-off-by: Rasmus Villemoes 
Signed-off-by: Bjorn Helgaas 
Acked-by: Borislav Petkov 
Signed-off-by: Greg Kroah-Hartman

PCI: Fix infinite loop with ROM image of size 0

2015-03-06T22:43:23+00:00

commit 16b036af31e1456cb69243a5a0c9ef801ecd1f17 upstream.

If the image size would ever read as 0, pci_get_rom_size() could keep
processing the same image over and over again.  Exit the loop if we ever
read a length of zero.

This fixes a soft lockup on boot when the radeon driver calls
pci_get_rom_size() on an AMD Radeon R7 250X PCIe discrete graphics card.

[bhelgaas: changelog, reference]
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386973
Reported-by: Federico 
Signed-off-by: Michel Dänzer 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

PCI: Generate uppercase hex for modalias var in uevent

2015-03-06T22:43:23+00:00

commit 145b3fe579db66fbe999a2bc3fd5b63dffe9636d upstream.

Some implementations of modprobe fail to load the driver for a PCI device
automatically because the "interface" part of the modalias from the kernel
is lowercase, and the modalias from file2alias is uppercase.

The "interface" is the low-order byte of the Class Code, defined in PCI
r3.0, Appendix D.  Most interface types defined in the spec do not use
alpha characters, so they won't be affected.  For example, 00h, 01h, 10h,
20h, etc. are unaffected.

Print the "interface" byte of the Class Code in uppercase hex, as we
already do for the Vendor ID, Device ID, Class, etc.

Commit 89ec3dcf17fd ("PCI: Generate uppercase hex for modalias interface
class") fixed only half of the problem.  Some udev implementations rely on
the uevent file and not the modalias file.

Fixes: d1ded203adf1 ("PCI: add MODALIAS to hotplug event for pci devices")
Fixes: 89ec3dcf17fd ("PCI: Generate uppercase hex for modalias interface class")
Signed-off-by: Ricardo Ribalda Delgado 
Signed-off-by: Bjorn Helgaas 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman