linux-stable.git/drivers/pci, branch v3.14.34

PCI: Mark Atheros AR93xx to avoid bus reset

2015-01-30T01:40:48+00:00

commit c3e59ee4e76686b0c84ca8faa1011d10cd4ca1b8 upstream.

Reports against the TL-WDN4800 card indicate that PCI bus reset of this
Atheros device cause system lock-ups and resets.  I've also been able to
confirm this behavior on multiple systems.  The device never returns from
reset and attempts to access config space of the device after reset result
in hangs.  Blacklist bus reset for the device to avoid this issue.

[bhelgaas: This regression appeared in v3.14.  Andreas bisected it to
425c1b223dac ("PCI: Add Virtual Channel to save/restore support"), but we
don't understand the mechanism by which that commit affects the reset
path.]

[bhelgaas: changelog, references]
Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.org
Reported-by: Andreas Hartmann 
Tested-by: Andreas Hartmann 
Signed-off-by: Alex Williamson 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI: Add flag for devices where we can't use bus reset

2015-01-30T01:40:48+00:00

commit f331a859e0ee5a898c1f47596eddad4c4f02d657 upstream.

Enable a mechanism for devices to quirk that they do not behave when
doing a PCI bus reset.  We require a modest level of spec compliant
behavior in order to do a reset, for instance the device should come
out of reset without throwing errors and PCI config space should be
accessible after reset.  This is too much to ask for some devices.

Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.org
Signed-off-by: Alex Williamson 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI: Restore detection of read-only BARs

2015-01-16T14:59:30+00:00

commit 36e8164882ca6d3c41cb91e6f09a3ed236841f80 upstream.

Commit 6ac665c63dca ("PCI: rewrite PCI BAR reading code") masked off
low-order bits from 'l', but not from 'sz'.  Both are passed to pci_size(),
which compares 'base == maxbase' to check for read-only BARs.  The masking
of 'l' means that comparison will never be 'true', so the check for
read-only BARs no longer works.

Resolve this by also masking off the low-order bits of 'sz' before passing
it into pci_size() as 'maxbase'.  With this change, pci_size() will once
again catch the problems that have been encountered to date:

  - AGP aperture BAR of AMD-7xx host bridges: if the AGP window is
    disabled, this BAR is read-only and read as 0x00000008 [1]

  - BARs 0-4 of ALi IDE controllers can be non-zero and read-only [1]

  - Intel Sandy Bridge - Thermal Management Controller [8086:0103];
    BAR 0 returning 0xfed98004 [2]

  - Intel Xeon E5 v3/Core i7 Power Control Unit [8086:2fc0];
    Bar 0 returning 0x00001a [3]

Link: [1] https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/drivers/pci/probe.c?id=1307ef6621991f1c4bc3cec1b5a4ebd6fd3d66b9 ("PCI: probing read-only BARs" (pre-git))
Link: [2] https://bugzilla.kernel.org/show_bug.cgi?id=43331
Link: [3] https://bugzilla.kernel.org/show_bug.cgi?id=85991
Reported-by: William Unruh 
Reported-by: Martin Lucina 
Signed-off-by: Myron Stowe 
Signed-off-by: Bjorn Helgaas 
CC: Matthew Wilcox 
Signed-off-by: Greg Kroah-Hartman

PCI/MSI: Add device flag indicating that 64-bit MSIs don't work

2014-12-06T23:55:34+00:00

commit f144d1496b47e7450f41b767d0d91c724c2198bc upstream.

This can be set by quirks/drivers to be used by the architecture code
that assigns the MSI addresses.

We additionally add verification in the core MSI code that the values
assigned by the architecture do satisfy the limitation in order to fail
gracefully if they don't (ie. the arch hasn't been updated to deal with
that quirk yet).

Signed-off-by: Benjamin Herrenschmidt 
Acked-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI: Support 64-bit bridge windows if we have 64-bit dma_addr_t

2014-12-06T23:55:34+00:00

commit 7fc986d8a9727e5d40da3c2c1c343da6142e82a9 upstream.

Aaron reported that a 32-bit x86 kernel with Physical Address Extension
(PAE) support complains about bridge prefetchable memory windows above 4GB:

  pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff]
  ...
  pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref]
  pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref]
  pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref]
  pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
  pci 0000:00:02.2: PCI bridge to [bus 03-04]
  pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
  pci 0000:00:02.2:   bridge window [mem 0x91900000-0x91cfffff]
  pci 0000:00:02.2: can't handle 64-bit address space for bridge

In this kernel, unsigned long is 32 bits and dma_addr_t is 64 bits.
Previously we used "unsigned long" to hold the bridge window address.  But
this is a bus address, so we should use dma_addr_t instead.

Use dma_addr_t to hold the bridge window base and limit.

The question of whether the CPU can actually *address* the window is
separate and depends on what the physical address space of the CPU is and
whether the host bridge does any address translation.

[bhelgaas: fix "shift count > width of type", changelog, stable tag]
Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=88131
Reported-by: Aaron Ma 
Tested-by: Aaron Ma 
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

PCI: Rename sysfs 'enabled' file back to 'enable'

2014-11-14T17:00:09+00:00

commit d8e7d53a2fc14e0830ab728cb84ee19933d3ac8d upstream.

Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"),
I misstyped the 'enable' sysfs filename as 'enabled', which broke the
userspace API.  This patch fixes that issue by renaming the file back.

Fixes: 5136b2da770d ("PCI: convert bus code to use dev_groups")
Reported-by: Jeff Epler 
Tested-by: Jeff Epler 	# on v3.14-rt
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Bjorn Helgaas

PCI: Generate uppercase hex for modalias interface class

2014-10-30T16:38:23+00:00

commit 89ec3dcf17fd3fa009ecf8faaba36828dd6bc416 upstream.

Some implementations of modprobe fail to load the driver for a PCI device
automatically because the "interface" part of the modalias from the kernel
is lowercase, and the modalias from file2alias is uppercase.

The "interface" is the low-order byte of the Class Code, defined in PCI
r3.0, Appendix D.  Most interface types defined in the spec do not use
alpha characters, so they won't be affected.  For example, 00h, 01h, 10h,
20h, etc. are unaffected.

Print the "interface" byte of the Class Code in uppercase hex, as we
already do for the Vendor ID, Device ID, Class, etc.

[bhelgaas: changelog]
Signed-off-by: Ricardo Ribalda Delgado 
Signed-off-by: Bjorn Helgaas 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

PCI: Increase IBM ipr SAS Crocodile BARs to at least system page size

2014-10-30T16:38:23+00:00

commit 9fe373f9997b48fcd6222b95baf4a20c134b587a upstream.

The Crocodile chip occasionally comes up with 4k and 8k BAR sizes.  Due to
an erratum, setting the SR-IOV page size causes the physical function BARs
to expand to the system page size.  Since ppc64 uses 64k pages, when Linux
tries to assign the smaller resource sizes to the now 64k BARs the address
will be truncated and the BARs will overlap.

Force Linux to allocate the resource as a full page, which avoids the
overlap.

[bhelgaas: print expanded resource, too]
Signed-off-by: Douglas Lehr 
Signed-off-by: Anton Blanchard 
Signed-off-by: Bjorn Helgaas 
Acked-by: Milton Miller 
Signed-off-by: Greg Kroah-Hartman

PCI: mvebu: Fix uninitialized variable in mvebu_get_tgt_attr()

2014-10-30T16:38:23+00:00

commit 56fab6e189441d714a2bfc8a64f3df9c0749dff7 upstream.

Geert Uytterhoeven reported a warning when building pci-mvebu:

  drivers/pci/host/pci-mvebu.c: In function 'mvebu_get_tgt_attr':
  drivers/pci/host/pci-mvebu.c:887:39: warning: 'rtype' may be used uninitialized in this function [-Wmaybe-uninitialized]
     if (slot == PCI_SLOT(devfn) && type == rtype) {
					 ^

And indeed, the code of mvebu_get_tgt_attr() may lead to the usage of rtype
when being uninitialized, even though it would only happen if we had
entries other than I/O space and 32 bits memory space.

This commit fixes that by simply skipping the current DT range being
considered, if it doesn't match the resource type we're looking for.

Reported-by: Geert Uytterhoeven 
Signed-off-by: Thomas Petazzoni 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman

ACPI / PCI: Fix sysfs acpi_index and label errors

2014-09-05T23:34:15+00:00

commit dcfa9be83866e28fcb8b7e22b4eeb4ba63bd3174 upstream.

Fix errors in handling "device label" _DSM return values.

If _DSM returns a Unicode string, the ACPI type is ACPI_TYPE_BUFFER, not
ACPI_TYPE_STRING.  Fix dsm_label_utf16s_to_utf8s() to convert UTF-16 from
acpi_object->buffer instead of acpi_object->string.

Prior to v3.14, we accepted Unicode labels (ACPI_TYPE_BUFFER return
values).  But after 1d0fcef73283, we accepted only ASCII (ACPI_TYPE_STRING)
(and we incorrectly tried to convert those ASCII labels from UTF-16 to
UTF-8).

Rejecting Unicode labels made us return -EPERM when reading sysfs
"acpi_index" or "label" files, which in turn caused on-board network
interfaces on a Dell PowerEdge E420 to be renamed (by udev net_id internal)
from eno1/eno2 to enp2s0f0/enp2s0f1.

Fix this by accepting either ACPI_TYPE_STRING (and treating it as ASCII) or
ACPI_TYPE_BUFFER (and converting from UTF-16 to UTF-8).

[bhelgaas: changelog]
Fixes: 1d0fcef73283 ("ACPI / PCI: replace open-coded _DSM code with helper functions")
Signed-off-by: Simone Gotti 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Jiang Liu 
Signed-off-by: Greg Kroah-Hartman