linux-stable.git/drivers/pci, branch linux-4.9.y Linux kernel stable tree PCI/sysfs: Fix double free in error path 2023-01-07T11:07:37+00:00 Sascha Hauer s.hauer@pengutronix.de 2022-11-08T23:05:59+00:00 5e411983bb1e839fd2eead5a53b7b888b845318e commit aa382ffa705bea9931ec92b6f3c70e1fdb372195 upstream. When pci_create_attr() fails, pci_remove_resource_files() is called which will iterate over the res_attr[_wc] arrays and frees every non NULL entry. To avoid a double free here set the array entry only after it's clear we successfully initialized it. Fixes: b562ec8f74e4 ("PCI: Don't leak memory if sysfs_create_bin_file() fails") Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aa382ffa705bea9931ec92b6f3c70e1fdb372195 upstream.

When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.

Fixes: b562ec8f74e4 ("PCI: Don't leak memory if sysfs_create_bin_file() fails")
Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge 2022-10-26T11:15:37+00:00 Maciej W. Rozycki macro@orcam.me.uk 2022-09-21T19:49:16+00:00 691c8290847dcde260e93766b143b4e881fc7176 commit 0e32818397426a688f598f35d3bc762eca6d7592 upstream. When pci_assign_resource() is unable to assign resources to a BAR, it uses pci_revert_fw_address() to fall back to a firmware assignment (if any). Previously pci_revert_fw_address() assumed all addresses could reach the device, but this is not true if the device is below a bridge that only forwards addresses within its windows. This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS did not assign valid addresses to several bridges and USB devices: pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff] pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff] pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff] pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:06:08.0: USB UHCI 1.1 pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable pci 0000:06:08.1: USB UHCI 1.1 pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window During the first pass of assigning unassigned resources, there was not enough I/O space available, so we couldn't assign the 06:08.0 BAR and reverted to the firmware assignment (still unreachable). Reverting the 06:08.1 assignment failed because it conflicted with 06:08.0: pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: no space for bridge window [io size 0x2000] pci 0000:02:02.0: no space for bridge window [io size 0x1000] pci 0000:05:00.0: no space for bridge window [io size 0x1000] pci 0000:06:08.0: BAR 4: no space for [io size 0x0020] pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: no space for [io size 0x0020] pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff] A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR, but left the 06:08.0 BAR alone, so the UHCI device was still unusable: pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f] ... uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host controller halted, very bad! uhci_hcd 0000:06:08.0: HCRESET not completed yet! uhci_hcd 0000:06:08.0: HC died; cleaning up If the address assigned by firmware is not reachable because it's not within upstream bridge windows, fail instead of assigning the unusable address from firmware. [bhelgaas: commit log, use pci_upstream_bridge()] Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263 Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.35+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0e32818397426a688f598f35d3bc762eca6d7592 upstream.

When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.

This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:

  pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
  pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
  pci 0000:01:00.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
  pci 0000:02:02.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
  pci 0000:05:00.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:06:08.0: USB UHCI 1.1
  pci 0000:06:08.0: BAR 4: [io  0xfce0-0xfcff]            # unreachable
  pci 0000:06:08.1: USB UHCI 1.1
  pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff]            # unreachable
  pci 0000:06:08.0: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window
  pci 0000:06:08.1: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window

During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable).  Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:

  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
  pci 0000:01:00.0: no space for bridge window [io  size 0x2000]
  pci 0000:02:02.0: no space for bridge window [io  size 0x1000]
  pci 0000:05:00.0: no space for bridge window [io  size 0x1000]
  pci 0000:06:08.0: BAR 4: no space for [io  size 0x0020]
  pci 0000:06:08.0: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
  pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
  pci 0000:06:08.1: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
  pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff] conflicts with 0000:06:08.0 [io  0xfce0-0xfcff]

A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:

  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff] released
  pci 0000:00:11.0:   bridge window [io  0x1000-0x2fff]   # reassigned
  pci 0000:01:00.0:   bridge window [io  0x1000-0x2fff]   # reassigned
  pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]   # reassigned
  pci 0000:05:00.0:   bridge window [io  0x2000-0x2fff]   # reassigned
  pci 0000:06:08.0: BAR 4: assigned [io  0xfce0-0xfcff]   # left alone
  pci 0000:06:08.1: BAR 4: assigned [io  0x2000-0x201f]
  ...
  uhci_hcd 0000:06:08.0: host system error, PCI problems?
  uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
  uhci_hcd 0000:06:08.0: host controller halted, very bad!
  uhci_hcd 0000:06:08.0: HCRESET not completed yet!
  uhci_hcd 0000:06:08.0: HC died; cleaning up

If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.

[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: qcom: Fix unbalanced PHY init on probe errors 2022-06-14T14:52:41+00:00 Johan Hovold johan+linaro@kernel.org 2022-04-01T13:38:54+00:00 faebc1a270273898199dfe209f387293a8d39eb5 commit 83013631f0f9961416abd812e228c8efbc2f6069 upstream. Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83013631f0f9961416abd812e228c8efbc2f6069 upstream.

Undo the PHY initialisation (e.g. balance runtime PM) if host
initialisation fails during probe.

Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org      # 4.5
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() 2022-06-14T14:52:30+00:00 Yicong Yang yangyicong@hisilicon.com 2022-04-04T06:25:39+00:00 da9792920ab525b8a932aa9aeee34529ad7b83f7 [ Upstream commit a91ee0e9fca9d7501286cfbced9b30a33e52740a ] The sysfs sriov_numvfs_store() path acquires the device lock before the config space access lock: sriov_numvfs_store device_lock # A (1) acquire device lock sriov_configure vfio_pci_sriov_configure # (for example) vfio_pci_core_sriov_configure pci_disable_sriov sriov_disable pci_cfg_access_lock pci_wait_cfg # B (4) wait for dev->block_cfg_access == 0 Previously, pci_dev_lock() acquired the config space access lock before the device lock: pci_dev_lock pci_cfg_access_lock dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1 device_lock # A (3) wait for device lock Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may deadlock with sriov_numvfs_store() if the operations occur in the sequence (1) (2) (3) (4). Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires the device lock before the config space access lock, the same as the sriov_numvfs_store() path. [bhelgaas: combined and adapted commit log from Jay Zhou's independent subsequent posting: https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com] Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyicong@hisilicon.com/ Also-posted-by: Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a91ee0e9fca9d7501286cfbced9b30a33e52740a ]

The sysfs sriov_numvfs_store() path acquires the device lock before the
config space access lock:

  sriov_numvfs_store
    device_lock                 # A (1) acquire device lock
    sriov_configure
      vfio_pci_sriov_configure  # (for example)
        vfio_pci_core_sriov_configure
          pci_disable_sriov
            sriov_disable
              pci_cfg_access_lock
                pci_wait_cfg    # B (4) wait for dev->block_cfg_access == 0

Previously, pci_dev_lock() acquired the config space access lock before the
device lock:

  pci_dev_lock
    pci_cfg_access_lock
      dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1
    device_lock                 # A (3) wait for device lock

Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may
deadlock with sriov_numvfs_store() if the operations occur in the sequence
(1) (2) (3) (4).

Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires
the device lock before the config space access lock, the same as the
sriov_numvfs_store() path.

[bhelgaas: combined and adapted commit log from Jay Zhou's independent
subsequent posting:
https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com]
Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyicong@hisilicon.com/
Also-posted-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: pciehp: Clear cmd_busy bit in polling mode 2022-04-20T07:06:30+00:00 Liguang Zhang zhangliguang@linux.alibaba.com 2021-11-11T05:42:58+00:00 0fa177499f96e623105d6a581e5bb302e1ae427c commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream. Writes to a Downstream Port's Slot Control register are PCIe hotplug "commands." If the Port supports Command Completed events, software must wait for a command to complete before writing to Slot Control again. pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr(). But when software notification is disabled, as it is when pcie_init() powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for command completion, and it neglects to clear ctrl->cmd_busy, which leads to spurious timeouts: pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago) pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago) Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed event (PCI_EXP_SLTSTA_CC). [bhelgaas: commit log] Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary") Link: https://lore.kernel.org/r/20211111054258.7309-1-zhangliguang@linux.alibaba.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143 Link: https://lore.kernel.org/r/20211126173309.GA12255@wunner.de Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream.

Writes to a Downstream Port's Slot Control register are PCIe hotplug
"commands."  If the Port supports Command Completed events, software must
wait for a command to complete before writing to Slot Control again.

pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control.  If
software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().

But when software notification is disabled, as it is when pcie_init()
powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
command completion, and it neglects to clear ctrl->cmd_busy, which leads to
spurious timeouts:

  pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago)
  pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago)

Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed
event (PCI_EXP_SLTSTA_CC).

[bhelgaas: commit log]
Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary")
Link: https://lore.kernel.org/r/20211111054258.7309-1-zhangliguang@linux.alibaba.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143
Link: https://lore.kernel.org/r/20211126173309.GA12255@wunner.de
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org	# v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller 2022-01-27T07:47:32+00:00 Yifeng Li tomli@tomli.me 2021-12-02T06:35:21+00:00 3f747f38ffd4128a7db798272084d8c2fd5d6233 commit e445375882883f69018aa669b67cbb37ec873406 upstream. Like other SATA controller chips in the Marvell 88SE91xx series, the Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents it from working under IOMMU. Add it to the list of devices that need the quirk. Without this patch, device initialization fails with DMA errors: ata8: softreset failed (1st FIS failed) DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear After applying the patch, the controller can be successfully initialized: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330) ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100 ata8.00: configured for UDMA/100 scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5 Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work Reported-by: Sam Bingner <sam@bingner.com> Tested-by: Sam Bingner <sam@bingner.com> Tested-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e445375882883f69018aa669b67cbb37ec873406 upstream.

Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU.  Add it to the list of devices that need the
quirk.

Without this patch, device initialization fails with DMA errors:

  ata8: softreset failed (1st FIS failed)
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear

After applying the patch, the controller can be successfully initialized:

  ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
  ata8.00: ATAPI: PIONEER BD-RW   BDR-207M, 1.21, max UDMA/100
  ata8.00: configured for UDMA/100
  scsi 7:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-207M 1.21 PQ: 0 ANSI: 5

Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work
Reported-by: Sam Bingner <sam@bingner.com>
Tested-by: Sam Bingner <sam@bingner.com>
Tested-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error 2021-12-22T08:05:14+00:00 Thomas Gleixner tglx@linutronix.de 2021-12-14T11:42:14+00:00 5d043063b525022b5f778b1e3288d55af1289461 commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream. PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X interrupt setup time. It's cleared on success, but the error handling path only clears the PCI_MSIX_FLAGS_ENABLE bit. That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is zero. That can be observed via lspci: Capabilities: [b0] MSI-X: Enable- Count=67 Masked+ Clear the bit in the error path to restore the reset state. Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early") Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Stefan Roese <sr@denx.de> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream.

PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X
interrupt setup time. It's cleared on success, but the error handling path
only clears the PCI_MSIX_FLAGS_ENABLE bit.

That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is
zero. That can be observed via lspci:

        Capabilities: [b0] MSI-X: Enable- Count=67 Masked+

Clear the bit in the error path to restore the reset state.

Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early")
Reported-by: Stefan Roese <sr@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stefan Roese <sr@denx.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI/MSI: Destroy sysfs before freeing entries 2021-11-26T10:48:40+00:00 Thomas Gleixner tglx@linutronix.de 2021-11-09T13:53:57+00:00 14cf22e85fff7710a3bed0fc9487821202f733a1 commit 3735459037114d31e5acd9894fad9aed104231a0 upstream. free_msi_irqs() frees the MSI entries before destroying the sysfs entries which are exposing them. Nothing prevents a concurrent free while a sysfs file is read and accesses the possibly freed entry. Move the sysfs release ahead of freeing the entries. Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87sfw5305m.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3735459037114d31e5acd9894fad9aed104231a0 upstream.

free_msi_irqs() frees the MSI entries before destroying the sysfs entries
which are exposing them. Nothing prevents a concurrent free while a sysfs
file is read and accesses the possibly freed entry.

Move the sysfs release ahead of freeing the entries.

Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87sfw5305m.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: aardvark: Don't spam about PIO Response Status 2021-11-26T10:48:38+00:00 Marek Behún kabel@kernel.org 2021-10-05T18:09:42+00:00 e92fac39696fab5e1eae4cd12a6584ddda412548 [ Upstream commit 464de7e7fff767e87429cd7be09c4f2cb50a6ccb ] Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status(). For example CRS is not an error status, it just says that the request should be retried. Link: https://lore.kernel.org/r/20211005180952.6812-4-kabel@kernel.org Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 464de7e7fff767e87429cd7be09c4f2cb50a6ccb ]

Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status().

For example CRS is not an error status, it just says that the request
should be retried.

Link: https://lore.kernel.org/r/20211005180952.6812-4-kabel@kernel.org
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG 2021-11-26T10:48:25+00:00 Marek Behún kabel@kernel.org 2021-10-28T18:56:55+00:00 3f2410ffd75073157fa0fa0639060c966fcc4267 commit 95997723b6402cd6c53e0f9e7ac640ec64eaaff8 upstream. The PCIE_MSI_PAYLOAD_REG contains 16-bit MSI number, not only lower 8 bits. Fix reading content of this register and add a comment describing the access to this register. Link: https://lore.kernel.org/r/20211028185659.20329-4-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 95997723b6402cd6c53e0f9e7ac640ec64eaaff8 upstream.

The PCIE_MSI_PAYLOAD_REG contains 16-bit MSI number, not only lower
8 bits. Fix reading content of this register and add a comment
describing the access to this register.

Link: https://lore.kernel.org/r/20211028185659.20329-4-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>